Vdwall LVP909 Series Technisches Handbuch
LVP909 operation instruction
Contents:
1………………………………………………….Signal switch buttons
2………………………………………………….Output channel selection buttons
3………………………………………………….User setup buttons
4………………………………………………….Function buttons
5………………………………………………….Power switch and socket
6………………………………………………….Software control port
7………………………………………………….Output ports
8………………………………………………….Input ports
9………………………………………………….Sending card slot
10…………………………………………………Setting language
11…………………………………………………Setting output resolution
12…………………………………………………Application mode configuration
13…………………………………………………Setting output width and height (App 1)
14…………………………………………………Setting output width and height (App 2 3 4)
15…………………………………………………Setting output width and height (App 5 6)
16…………………………………………………Configuring input source for App5 6
17…………………………………………………Setting PIP (POP)
1. Signal switch buttons
1.1. LVP909 has 6 channels of input port: V1 V2 VGA DVI HDMI SDI;
1.2. after connecting input video source, you need LVP909 outputs which one
press relative signal button, for example we need HDMI output, press HDMI
button LVP909 outputs HDMI video source, of course you have connected
HDMI source to the input port;
2. Output channel selection buttons
2.1. LVP909 has 4 output ports Out1 Out2 Out3 Out4, when configure output
port parameters in user menu press relative button to select output port then
configure it;
2.2. LVP909 has 4 image layers (which in application mode 5 6 is available) the
image layer buttons are IMG1 IMAG2 IMAG 3 IMG4, when configure
image layer parameters in user menu press relative button to select image
layer then configure it
3. User setup buttons
3.1. Knob OK: when configuring parameters value rotate it to change or increase
and decrease parameter value;
3.2. Brt+: after entering user setup menu, press it to select next setup option
( when not in setup configuration state press it to increase brightness);
3.3. Brt-: after entering user setup menu, press it to select last setup option ( when
not in setup configuration state press it to decrease brightness);
3.4. Setup: press it to enter user setup menu;
3.5. : return button, after entering setup menu press it to exit setup menu;
4. Function buttons
4.1. PIP: PIP (picture in picture) function switch;
4.2. M1 M2 M3 M4: memory buttons, LVP909 can save 4 modes in advanced (when
in application mode 1 save 4 mode for PIP, when in another mode can save 4
modes for output port parameters);
4.3. Take: quick switch button, when LVP909 has opened quick switch function,
after pre-selecting a video source press the button can let the pre-select video
source output quickly;
4.4. C/F: switch effect selection button ( seamless switching, fade in and fade out
switching);
4.5. Auto: VGA signal automatically adjust button, when input VGA source to
LVP909 and the video on LED screen not in the correct location and has some
display problem, press the button to adjust VGA input source let it OK;
4.6. Lock: press the button to open lock function, after opening all the buttons can’t
work, press Lock button 3 times to unlock;
4.7. Info: press it you can refer the system information of LVP909 displaying on LCD
screen on front panel;
5. Power switch and socket
6. Software control port
6.1. LVP909 has 3 software control ports LAN USB RS232;
6.2. After connect control cable to computer, open the control software on PC,
must select correct port on PC, for example we connect control cable to PC’s
COM1 port, in control software you must select COM1 port;
6.3. Wifi antenna: LVP909F has Wifi control function, first install APP on mobile
phone then open wifi of phone to find LVP909 wifi then connect it, after
connecting you can open APP on phono to control LVP909F by Wifi function;
7. Output ports
7.1. LVP909 has 4 output prots, Out1 Out2 Out3 Out4;
7.2. Out4 ( DVI-d) support output GAV format, so you can use DVI to VGA cable to
connect the port to a monitor with VGA input port;
8. Input ports
8.1. LVP909 has 6 channels of input port SDI DVI HDMI VGA V1 V2,
connect relative format video source to relative input port, for example Laptop
VGA to connect VGA port;
9. Sending card slot
9.1. LVP909 can put two common sending cards inside, normally common sending
card only has two RJ45 ports;
10. Setting language
10.1. Press power switch to open processor, then you can see the interface as below;
10.2. Press Setup button to enter user setup menu, press Brt- button to select 6. 语
言/language，press OK to enter language setup menu;
10.3. After entering language setup menu, rotate OK to select 6.1. 语言/Language
English, then press OK to confirm, press return button to exit user setup menu;
输入： VGA
输入状态： 1366x768_60
--------------------------------------------------------------------
输出位置大小： （0，0，1920，1080）
--------------------------------------------------------------------
切换方式： 一键直接切换
切换效果： 无缝直切
应用模式： AppM1(切换器)
设置
--------------------------------------------------------------------
1.输出端口配置 >>
2.输出图像 >>
3.输入信号 >>
4.图像画质 >>
5.通讯 >>
6.语言/Language >>
7.高级 >>
11. Setting output resolution
11.1. Press Setup button to enter user setup menu, press Brt+ button to select 1.
Output CFG, press OK to enter configuration menu;
11.2. Press Brt+ button to select 1.1 Resolution 1920 x 1080_60, rotate OK to
select destination output resolution, after selectin resolution press Brt- button
to select 1.3 Setup press OK to confirm;
6. 语言/Language
--------------------------------------------------------------------
6.1. 语言/Language English
Setup
--------------------------------------------------------------------
1.Output CFG >>
2.Output Image >>
3.Input Video Signal >>
4.Color & Brightness . etc. >>
5.Coummunication >>
6.语言/Language >>
7.Advanced >>
Andere Handbücher für LVP909 Series
1
Inhaltsverzeichnis
Andere Vdwall Stromverteilungseinheit Handbücher
