Vega Absolute Smart-MS0101 Bedienungsanleitung
www.vega-absolute.ru
MOTION SENSOR
SMART-MS0101
User Manual
Infrared motion sensor Vega Smart-MS0101 is designed
to detect penetration into the protected area. The
sensor alternately operates in two modes: «Guard» and
«Neutral». Sends an alarm signal to the LoRaWAN™
network by the triggering.
Smart-MS0101 / User Manual
2
Revision №03 - 28.09.2018
Document Information
Title
Motion sensor Smart-MS0101
Document type
Manual –Translation from Russian
Document number
V05-MS0101-01
Revision and date
03 - 28.09.2018
This document applies to the following products:
Product name
Type number
Vega Smart
Vega Smart-MS0101
Revision History
Revision
Date
Name
Comments
01
08.12.2017
KEV
Document creation date
02
08.08.2018
KEV
Technical characteristics are added, new part is
added
03
28.09.2018
KEV
Typo at the communication protocol was fixed
Smart-MS0101 / User Manual
3
Revision №03 - 28.09.2018
CONTENTS
INTRODUCTION............................................................................................................................................................................4
1 DESCRIPTION AND OPERATION ............................................................................................................................................5
2 SPECIFICATION ..........................................................................................................................................................................6
3 OPERATION ................................................................................................................................................................................7
Indication ....................................................................................................................................................................................7
Initial startup...............................................................................................................................................................................8
Sensor mounting recommendations ..................................................................................................................................10
Connecting via USB ................................................................................................................................................................11
4 VEGA LORAWAN CONFIGURATOR......................................................................................................................................13
Interface of the application...................................................................................................................................................13
Connection to the device......................................................................................................................................................14
“Device info” tab......................................................................................................................................................................15
“LoRaWAN settings” tab .........................................................................................................................................................16
“Smart-MS0101” tab................................................................................................................................................................21
5 COMMUNICATION PROTOCOL ...........................................................................................................................................22
SMART-MS0101 transmits the following types of packets .............................................................................................22
6 STORAGE AND TRANSPORTATION REQUIREMENTS ......................................................................................................23
7 CONTENT OF THE PACKAGE ................................................................................................................................................24
8 WARRANTY................................................................................................................................................................................25
Smart-MS0101 / User Manual
4
Revision №03 - 28.09.2018
INTRODUCTION
This manual is designated for Vega Smart-MS0101 motion sensor (hereinafter –device,
sensor) manufactured by Vega-Absolute LLC and provides information on powering and
activation procedure, control commands and functions of the device.
This manual is targeted at specialists familiar with installation work fundamentals for
electronic and electrical equipment.
The device shall be installed and adjusted by qualified specialists in order
to ensure proper operation of the device
Smart-MS0101 / User Manual
5
Revision №03 - 28.09.2018
1 DESCRIPTION AND OPERATION
Infrared motion sensor Vega Smart-MS0101 is designed to detect penetration into the
protected area.
The sensor alternately operates in two modes: «Guard» and «Neutral». In the «Guard»
mode, the device sends an alarm message to the LoRaWAN™ network when motion is
detected, after which it switches to the «Neutral» mode for a while. In the «Neutral» mode, the
sensor does not send alarm messages when motion is detected. If the movement in the
protected area has ceased, then the device switches back to the «Guard» mode after a certain
configurable period of time.
Auto-post time interval is setting up by the «Vega LoRaWAN configurator»application
and may vary from 1 to 60 minutes.
Vega Smart-MS0101 can be used to protect premises, buildings and structures, as well as
in Smart Home systems, built on LoRaWAN™ technology.
The sensor is powered by a CR123A 1400 mAh replaceable battery.
The sensor is configured via USB with special software «Vega LoRaWAN configurator».
Information for registering of the device in the LoRaWAN™ network is available via
software «Vega LoRaWAN configurator».
Smart-MS0101 / User Manual
6
Revision №03 - 28.09.2018
2 SPECIFICATION
Main
USB-port
yes
Operating temperatures
-40…+70 °С
Maximum detection range
not less than 15 m
Range of velocities of the intruder
0.3…3 m/s
Sensor mounting height
2.1 m
Angle of the sensor in the vertical plane
6°
Resistance to external light
6500 lux
Built-in temperature sensor
yes
LoRaWAN™
LoRaWAN™ class
A
Quantity of LoRa channels
16
Frequency band
EU-868, RU-868, custom
Activation type
ABP or OTAA
Communication period
1, 6, 12 or 24 hours
Antenna
internal
Sensitivity
-138 dBm
Radio coverage in restrained urban conditions
max 5 km
Radio coverage within line of sight
max 15 km
Power output
up to 100 mW (configurable)
Power
Replaceable battery
CR123A 3V, 1400 mAh
Case
Housing dimensions
35 х 50 х 70 mm
Ingress protection rating
IP41
Vega Smart-MS0101 motion sensor is class A device (LoRaWAN™ classification) and has
the following features:
oADR support (Adaptive Data Rate)
oSending of confirmed packets (configurable)
oExtra communication in case of alarm event
oTwo working modes “Neutral” and “Guard”
oTemperature measurement by the internal temperature sensor
oBattery charge measurment (%)
oSensitivity: up to -138dBm
Smart-MS0101 / User Manual
7
Revision №03 - 28.09.2018
3 OPERATION
INDICATION
A double color indicator is located on the front of the sensor case and it flashes red when
detect motion in the protected area but no more than one at 10 seconds.
One more indicator is located on the board and it shown only when cover off and displays
a linking to the network state.
Indicator signal
Meaning
A series of short red flashes
Linking to the network
One long red flash
The device switched to the “Storage” mode
Indicator on the
front of the device
case
Indicator on the
device case
Indicator on the
board
Smart-MS0101 / User Manual
8
Revision №03 - 28.09.2018
INITIAL STARTUP
Motion sensor is powered by the CR123A 3V 1400 mAh replaceable battery. You need to
insert the battery observing the polarity before start.
The sensor supports two activation methods in the LoRaWAN™ network - ABP and OTAA.
Select one of the methods using “Vega LoRaWAN Configurator” application (See part 4).
1. ABP. After pressing the start button, the device immediately starts working in the "Active"
mode.
Вставить
батарейку CR123А
в батарейный
отсек
Нажать кнопку
запуска,
расположенную
на плате
Smart-MS0101 / User Manual
9
Revision №03 - 28.09.2018
2. OTAA. After pressing the start button, the device makes three attempts to connect to
the network within the set frequency band. After the activation request is confirmed by
LoRaWAN™ network, the device sends a signal and switches to the "Active" mode. If all attempts
fail, the sensor switches to the “Storage” mode.
To manually switch the device from the "Active" mode to the "Storage" mode, you can
use the long press of the start button (more than 5 seconds).
Before connecting the device, make sure that its registration data is
entered in the network - Device EUI, Application EUI and Application
Key for OTAA, or Device address, Application session key and Network
session key for ABP
Smart-MS0101 / User Manual
10
Revision №03 - 28.09.2018
SENSOR MOUNTING RECOMMENDATIONS
The sensor must be installed in such a way that the probable penetration paths of the
intruder cross the central axis of the detection zone.
Recommended mounting height of the sensor is 2…2,5 m.
Do not install the sensor near objects that are powerful sources of heat or have the ability
to quickly change their temperature (fireplaces, stoves, air conditioners, radiators, etc.), in places
with strong air currents or the possibility of direct sunlight.
The wall on which the sensor is mounted should not be subjected to strong vibrations.
The presence in the detection zone of objects (curtains, screens, large objects, furniture,
plants, etc.) creates behind them "dead zones", the detection of the offender behind these
objects may not occur.
Andere Handbücher für Smart-MS0101
1
Inhaltsverzeichnis
Andere Vega Absolute Sicherheitssensor Handbücher
