Veigel eSlider Bedienungsanleitung
Installation and
Operating Instructions
eSlider
Electrical 8-way
transfer seat console
Left-hand drive Art. no.: S10003
Right-hand drive Art. no.: S10005
www.veigel-automotive.de
Rehamotive
Document no. 250610
Created 2021-10-04
Name Schulz
Revised 2022-01-26
Version 2
Subject to technical modications without prior
notication and to errors.
Reproduction, even in part, only permitted with
permission from Veigel GmbH + Co. KG.
Contents
1-1
Contents
Contents.....................................................................................................1-1
Revision history .................................................................................................. 1-2
Symbols used ..................................................................................................... 1-3
General information ..................................................................................2-1
General safety information.................................................................................. 2-1
Intended use ....................................................................................................... 2-1
Foreseeable misuse ........................................................................................... 2-2
Product description...................................................................................3-1
Type plate ........................................................................................................... 3-1
Scope of delivery - 8-way eSlider ....................................................................... 3-2
Scope of delivery - VEC control unit - eSlider..................................................... 3-3
Operation....................................................................................................4-1
For your safety.................................................................................................... 4-1
Before setting o................................................................................................. 4-1
Functions of the control unit buttons................................................................... 4-2
Activating the memory function........................................................................... 4-3
Operating the memory function .......................................................................... 4-4
Using the memory function ................................................................................. 4-5
Linear unit emergency release mechanism ........................................................ 4-6
Assembly....................................................................................................5-1
Safety information............................................................................................... 5-1
Tightening torques .............................................................................................. 5-1
Assembling the eSlider ...................................................................................... 5-2
Assembling the VEC control unit - eSlider.......................................................... 5-3
Overview of plug connections on the VEC control unit - eSlider ........................ 5-4
Assembling the control unit................................................................................. 5-5
Adjusting the control unit .................................................................................... 5-6
Checking the function ......................................................................................... 5-7
Maintenance and care...............................................................................6-1
Safety information............................................................................................... 6-1
Maintenance/care ............................................................................................... 6-1
Transport, storage and disposal..............................................................7-1
Transport and storage......................................................................................... 7-1
Disposal .............................................................................................................. 7-1
Installation record .....................................................................................8-1
1-2
Contents
Revision history
Edition Revisions Chapter
01 / 2021-10-04 Initial version
02 / 2014-03-26 Tilt graphic updated 3-7
Contents
1-3
Veigel hotline
Telephone: +49 (0) 7941 60585-0
Fax: +49 (0) 7941 60585-20
E-mail: info@veigel-automotive.de
Web: http://www.veigel-automotive.de/
Veigel GmbH + Co. KG
Verrenberger Weg 36
74613 Öhringen, Germany
Symbols used
The following symbols are used in these operating instructions:
Individual images contained in these instructions may deviate
from the driving aid you received.
This symbol refers to information that, if not observed, will pose a risk to your
health or the functionality of the device.
This symbol indicates important information and
tips on how to use the operating instructions.
This symbol indicates a risk of injury and crushing.
1-4
Contents
Blank page for your notes
Safety information
2-1
General information
General safety information
The eSlider is a pre-assembled component that comes ready to install.
It was designed and built in line with carefully chosen harmonised standards that
must be observed, as well as further technical specications. Consequently, it
is a state-of-the-art product and provides the best possible level of safety while
in operation.
The eSlider left the factory in a awless condition in terms of technical safety.
However, safety can only be achieved in practice if all the required actions have
been taken. The persons responsible for installation and operation have a duty
to plan these actions and monitor their implementation.
Observe the following in particular during operation:
• Please read these installation and operating instructions carefully before
using the eSlider.
• Only accessories obtained from the manufacturer may be used with the eSlider.
• Structural modications to the eSlider may only be performed following con-
sultation with the manufacturer.
• Comply with the operating instructions when using and operating the eSlider.
• Observe the applicable accident prevention and safety provisions when op-
erating the eSlider.
• The eSlider may only be operated if it is in a awless, functional condition.
Arrange for functional faults to be remedied immediately.
• The complete operating and installation instructions must always be carried
in the vehicle.
• This eSlider is only suitable for use in the named vehicle types; it may only be
installed in these vehicle types.
• The eSlider replaces an original seat without a lateral airbag.
• The lateral airbag on the vehicle seat must be deactivated.
• The swivel functions are only intended to make vehicle entry and exit easier
for people up to a maximum body weight of 170 kg.
Intended use
If this information is not observed, this will void the warranty, the manu-
facturer’s liability and, in certain situations, the type approval. As a con-
sequence, no claims can then be made against us.
2-2
Safety information
• The red markings indicate the risk of injury when moving the eSlider.
• It is not permitted to operate the eSlider while driving.
• On the whole, private individuals are not permitted to store airbags.
Foreseeable misuse
3-1
Product description
Product description
The Veigel eSlider oers ideal support for wheelchair users who access their
vehicle in their wheelchair and then transfer themselves onto the driver's seat
when inside the vehicle.
The Veigel eSlider is a fully-electric transfer seat console. Besides the 6 main dir-
ections (forwards-backwards, up-down, right turn-left turn), the 6+2-way version
also oers a tilt seat adjustment function. This oers a great advantage when
sitting in the vehicle to improve lateral support, avoid bruising and lift the feet o
the oor when transferring from the vehicle seat to the wheelchair and vice versa.
All the dierent directions of the eSlider can be programmed and operated with
just one lever. This facilitates the daily routine and can be easily operated even
by users with limited hand and nger functions.
The Veigel eSlider is crash-tested and complies with the strict standards of the
automotive industry.
The eSlider has 8 positions:
Type plate
The type plate and factory number are important when it comes to uniquely
identifying the scope of delivery.
Unique order number
Unique serial number of the driving aid
Type designation
Veigel GmbH + Co. KG
Type: Version: S
Type designation:
Factory no.: xxxxxx-xxx
Article no.: S10005
Please enter the factory number of the driving aid here:
Factory no.: ______________________________
The type plate is stuck onto the eSlider.
Tilt Height Turn Forwards-
backwards
Save
3-2
Product description
Scope of delivery - 8-way eSlider
Seat attach-
ment to
lift unit
Lift unit
Linear unit Footrest
Swivel unit
Seat at-
tachment to
vehicle
Lift unit trim
panel
Linear unit front
trim panel
Lift unit trim
panel
Linear unit rear
trim panel
Control unit
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
