Velbus VMB4RYNO Bedienungsanleitung

Programmable

4-channel relay module

for Velbus system

2VMB4RYNO 4-channel relay module user manual - version 1

INDEX

INDEX........................................................................................................................................2

DESCRIPTION...........................................................................................................................3

CHARACTERISTICS.................................................................................................................3

VELBUS CHARACTERISTICS .................................................................................................5

OVERVIEW................................................................................................................................6

LED INDICATIONS....................................................................................................................7

LOCAL CONTROL....................................................................................................................8

USE............................................................................................................................................9

Mains Voltage Connection Diagram .......................................................................................9

Low-Voltage Connection Diagram........................................................................................11

Termination...........................................................................................................................12

Configuration........................................................................................................................13

Address.............................................................................................................................13

Relay Contact Behaviour ..................................................................................................13

Control Functions..............................................................................................................13

CHECKING THE SOFTWARE VERSION ...............................................................................17

VMB4RYNO 4-channel relay module user manual - version 1 3

DESCRIPTION

This relay module is suited for switching on or off the lighting in the living room, the garden fountain, the mains

outlets in the children’s room, and many more. This is only suited for use in a Velbus system.

Multiple functions, e.g. switching on/off timers, are to be programmed via the Velbuslink software.

CHARACTERISTICS

Use:

•suitable for switching on/off mains-powered or low-voltage lighting or consumers

•only suitable for use in a Velbus installation

Outputs:

•4 single-pole NO relay contacts

•relay contact debounce

•switching capacity:

o16A @ 230VAC input voltage

o12A @ 30VDC input voltage

oallowed switch-on current up to 80A (lamp switch-on current)

•each relay channel may be inverted in order to simulate an NC contact

•1 extra virtual channel

LED indications:

•status indication for all 4 channels

ocontinuously lit: relay switched on

oslow blinking: timer 1 running

ofast blinking: timer 2 running

otwo short blinks: communication error

•power voltage present

•data reception and transfer over the Velbus

•status notification of the relay channels to the control modules

Module power supply:

•required power voltage: 12...18VDC

•consumption in stand-by: 30mA

•max. consumption: 250mA

Dimensions:

•standard DIN-rail housing: 4 modules

•L x W x H: 90 x 71 x 58mm

Configuration:

•only configurable via the Velbus PC interface (VMB1USB, VMB1RS or VMBRSUSB) and the Velbuslink

software

•addressing through software (up to 250 addresses)

•storage space for 39 different pushbuttons and their function

•multiple functions and timer settings are configurable through software

•learned pushbuttons are saved in case of a power failure

Control:

•local on/off control on the module

•no direct pushbutton connections

•through Velbus commands or pushbuttons connected to the Velbus system

•multiple control functions

omoment

ooff

oon

oon/off

otimer (start/stop, restartable or non-restartable, switch-on/off delay, interval)

ooutput forced off

ooutput forced on

ooutput inhibition

oetc.

4VMB4RYNO 4-channel relay module user manual - version 1

Timer presets:

•only configurable through the Velbuslink software

•timer presets configurable between:

o1 sec and 2 min in steps of 1 sec

o2 min and 5 min in steps of 15 sec

o5 min and 30 min in steps of 30 sec

o30 min and 1 hour in steps of 1 min

o1 hour and 5 hours in steps of 15 min

o5 hours and 10 hours in steps of 30 min

o10 hours and 24 hours in steps of 1 hour

o2 days

o3 days

ono switch-off timer

VMB4RYNO 4-channel relay module user manual - version 1 5

VELBUS CHARACTERISTICS

•2-wire communication for Velbus data and 2 wires for power

•data transfer: 16.6 kbit/s

•serial data protocol: CAN (Controller Area Network)

•short-circuit proof (towards (-) or (+) of power)

•bus error indication: 2 short blinks of the operation mode LED

•self-restoring after 25 seconds in case of a bus error

Possibility to assign a name (max. 16 characters) to each output channel.

The relay module can send following messages:

•relay status

•relay module type (with software version)

•channel names

•communication error counter

•memory capacity

The relay module can send following commands:

•switch off LEDs on a control module

•switch on LEDs on a control module

•slow or fast blinking of the LEDs on a control module

The relay module can receive following messages:

•pushbutton module status

The relay module can receive following commands:

•switch on relay channel

•switch off relay channel

•start timer

•start blinking timer

•recall relay status

•recall module type and software version

•recall communication error counter

•recall relay names

•recall memory contents

•overwrite memory contents

•switch off pushbutton indication LED

6VMB4RYNO 4-channel relay module user manual - version 1

OVERVIEW

Connections LED indications

1 Relay contact channel 1 7 power LED

2 Relay contact channel 2 8 Velbus RX (receive) LED

3 Relay contact channel 3 9 Velbus TX (transmit) LED

4 Relay contact channel 4 10 output status

5 Velbus

6 Velbus power supply

6 5

2 3 4

VMB4RYNO 4-channel relay module user manual - version 1 7

LED INDICATIONS

Output LED:

•off when consumer is switched off

•on when consumer is switched on

•blinks rapidly when timer 1 is

running

•blinks slowly when timer 2 is

running

•blinks shortly twice at

communication error

On LED:

lights when power

voltage is present

Rx LED:

lights at Velbus data

reception

Tx LED:

lights at Velbus data transfer

8VMB4RYNO 4-channel relay module user manual - version 1

LOCAL CONTROL

Remove the cover.

Local control:

on or off

VMB4RYNO 4-channel relay module user manual - version 1 9

USE

The relay module features 4 non-voltage NO contacts wich allow you to switch mains-voltage (230V) and low-

voltage (12 or 24V) consumers.

The module is integrated into the Velbus system and controlled through the VMB4PD control panel or by means

of pushbuttons connected to a VMB8PB pushbutton interface, VMB6IN or any other relay module.

To interconnect the Velbus modules it is recommended to use a twisted-pair cable (EIB 2x2x0.8mm², UTP

4x2x0.51mm² - CAT5 or equivalent).

Make sure to use a heavy-gauge wire (0.5mm2or more) in case of a multiple module connection (>10 modules) or

with log connections (>50m).

Connect the bus to the module (mind the polarity).

Mains Voltage Connection Diagram

A single-pole load (e.g. lighting) can be connected directly to the output.

10 VMB4RYNO 4-channel relay module user manual - version 1

A double-pole load (e.g. mains outlet) requires an extra double-pole relay.

A triple-pole load (e.g. water heater) requires a quadrupole relay.

Inhaltsverzeichnis

Andere Velbus Relais Handbücher

Velbus

Velbus VMB1RYS Bedienungsanleitung

Beliebte Relais Handbücher anderer Marken

Shelly

Shelly Pro Series Bedienungsanleitung

GE MVAX 11 Bedienungsanleitung

ABB

ABB RELION REF615R Bedienungsanleitung

Pilz

Pilz PNOZ X10 Betriebsanleitung

ABB

ABB SPAJ 142 C Stücklistenhandbuch

Kemo Electronic

Kemo Electronic B197 Bedienungsanleitung

Seg

Seg MRM3 Bedienungsanleitung

Basler

Basler BE1-700C Bedienungsanleitung

CD Automation

CD Automation REVEX 2PH 280A Bedienungsanleitung

Ruelco

Ruelco 1S04 Bedienungsanleitung

Basler

Basler V3E Z1P B2C1F Bedienungsanleitung

Doepke

Doepke Dupline DSM 2 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RT1966-4D Bedienungsanleitung

GE DGP Bedienungsanleitung

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 4 Bedienungsanleitung

Siemens

Siemens BD2-AK03X/FS Series Bedienungsanleitung

Leuze

Leuze MSI-SR5B Bedienungsanleitung