CSOL06
V. 01 – 27/03/2012 4 ©Velleman nv
•Respect a minimum distance of 0.5 m between the device and any
other object.
•All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
•Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
•Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
•Keep this manual for future reference.
4. Features
•recharges by sunlight via 0.33W solar panel
•lights up in the dark through the 0.07W LED
•shines at full strength (0.07W + 0.3W LEDs) when the PIR sensor
detects motion within 2-3m range
•no wiring, fast & easy installation
•for wall mounting
•on/off switch
•stainless steel housing
•water & corrosion resistant
•IP44
•for outdoor use.
5. Operation
Refer to the illustrations on page 2of this manual.
a. Switching on and Off
•To switch on the device, push the on/off button [1] in the AUTO
position (down). The lamp will automatically light up in standby
mode at night: only the LED behind the horizontal strips [5] is lit.
•When the device detects motion, the bottom LED [6] lights up as
well to illuminate the area.
•To switch off the device, push the on/off button [1] to the OFF
position (up). The battery will charge, but the lamp will not light
up at night.
