Vello BG-C2.2 Bedienungsanleitung
BG-C2.2
BAT TERY GRIP
Designed For The Canon 5D
Mark II SLR Camera
USER’S MANUAL
Introduction
Thank you for choosing Vello and congratulations
on your new BG-C2.2 battery grip purchase. Enjoy
the many benefits that a battery grip offers, such as
extended shooting time and more control and comfort
when shooting in a vertical (portrait) orientation.
The Vello BG-C2.2 is compatible with the Canon 5D
Mark II SLR camera. The BG-C2.2 accepts two Canon
LP-E6 rechargeable batteries, or six AA batteries
(alkaline, Ni-MH, lithium, or nickel-manganese) can be
used instead for added convenience. The BG-C2.2 is
equipped with an alternate shutter-release button, AF
start button, AF point selection, AE lock/FE lock button,
multi-function button, and main dial for shooting in a
vertical position.
Please read through this entire manual before
using the BG-C2.2 battery grip.
2
Precautions
1.
The BG-C2.2 should only be used with compatible
devices specified in this manual.
2.
Only use with batteries and battery holders
recommended in this manual.
3.
Cover the power terminals with the contact cap
when the BG-C2.2 is not in use. This prevents
electrical shorts caused by metal objects touching
the power terminals.
4.
When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5. If you notice smoke, an unusual smell or noise from
the battery pack, discontinue use immediately.
Remove the batteries and take the device to a Vello
authorized reseller.
6.
Turn the grip power off when not shooting vertically.
7.
The battery level may not display properly if batteries
are inserted before mounting the grip.
8. Remove batteries from the grip when not in use.
9. Do not attempt to disassemble.
10.
Avoid water or extreme humidity and keep in a dry
and cool place.
11. Keep out of reach of children.
3
OVERVIEW INTRODUCTION
ASSEMBLY
Overview
12
3
5
6
7
13
14
9
10
8
12
18
16
15
17
11
4
4
OVERVIEW INTRODUCTION
ASSEMBLY
1Mounting Screw
Aligns with the camera’s tripod socket.
2Guide Pin
Helps align the camera to the grip.
3Attachment Wheel
Secures the grip to the camera.
4Battery Tray Lock
5DC Coupler Cord Mount
Groove for use with the Canon AC
Power Adapter (ACK-E6).
6
AF Point Selection/Magnify
Button*
7
AE Lock/FE Lock/Index/Reduce
Button*
8
AF Start Button
9
Grip Power ON/OFF
10
Camera Battery Chamber Cover
Holder
Stores the cover when the grip is
mounted.
11 Electrical Contacts
Communicates with the camera’s
electronics.
12
Contact Cap
Protects grip contacts. Keep covered
when the grip is not in use.
13 Battery Holder
Holds up to two Canon LP-E6
batteries.
14 AA Battery Holder
Holder for six AA batteries.
15 Main Dial*
16 Shutter-Release Button*
17 Tripod Socket
For mounting on a tripod.
18 Hand Strap Mount
Optional hand strap may be mounted
for a secure hold while shooting.
* Performs the same function as on the
camera.
5
Attaching The Grip
1.
Ensure that the power is
turned off on the camera
and that the power switch
is set to OFF on the
battery grip.
2.
Remove the battery
from the camera battery
compartment.
3.
Open the camera battery
chamber cover and remove
as indicated above.
2
1
6
4.
To prevent loss, place the
camera battery chamber
cover into the BG-C2.2
battery chamber holder.
5.
Remove the protective
cap and connect the BG-
C2.2 grip to the camera,
while aligning the grip’s
mounting screw with the
camera’s tripod socket.
6.
Rotate the attachment
wheel in the direction
shown by the arrow until it
is firmly tightened.
When removing the grip, turn
the camera power off, remove
batteries, and replace protective
contact cap.
7
OVERVIEW INTRODUCTION
ASSEMBLY
Inserting Batteries
1.
Ensure that the power is
turned off on the camera
and grip. Pull the lever
down
A
and twist counter
clockwise
B
to open the
battery chamber door
and remove the battery
holder C.
2.
Canon LP-E6 Batteries:
Insert up to two batteries
by orienting the arrow on
the battery toward the
interior of the holder. Press
the front of the battery
down
A
and slide forward
while pressing on the back
of the battery B.
3.
AA Batteries: Place six
new AA batteries of the
same type into the AA
battery holder as shown,
while ensuring that they are
in the correct orientation.
A
A
A
B
B
B
C
8
1.
Slide the battery holder
into the grip, twist the lever
clockwise to lock, and flip it
up to secure it.
2.
Switch the grip power to
ON and then turn on the
camera’s power. Check the
battery level in the control
panel or viewfinder.
3. Household Power Outlet:
To mount the Canon
ACK-E6 AC Power Adapter
Kit (sold separately), insert
the DC coupler into the
side of the handler with
the release lever just like
a battery. Pass the cord
through the groove on the
back of the grip.
A
B
Ensure that camera power is
turned off before mounting DC
coupler. Ensure that the DC
cord doesn’t get pinched by the
battery holder.
9
OVERVIEW INTRODUCTION
ASSEMBLY
Specifications
Power Source 1. One or two Canon LP-E6 rechargeable batteries
2. Six AA/LR6 Alkaline batteries
3. Works with the Canon AC Adapter Kit ACK-E8 (sold separately)
Operating Temperature 32 – 104 °F (0 – 40 °C)
Dimensions (W × H × D) Approximately 5.9˝ × 4.6˝ × 3.3˝ (15 × 11.7 × 8.4 cm)
Weight Approximately 9.4 oz. (266 g) (excluding holder and batteries)
* Approximate measurements.
Specifications and design are subject to change without notice.
AA batteries do not provide as much shooting time as LP-E6 rechargeable batteries. Performance of AA batteries may also be dependent on brand
and storage conditions. AA batteries may not function under 68º F (20º C).
Please note: When using the AA battery tray, the battery indicator will only work with Ni-MH batteries.
This product is not compatible with Duracell®brand alkaline batteries.
10
Inhaltsverzeichnis
Andere Vello Akkuladegerät Handbücher
