Vello FreeWave Plus Bedienungsanleitung

FREEWAVE

PLUS

USER MANUAL

Thank you for choosing the Vello

FreeWave Plus Wireless Remote Shutter

Release. This device triggers your

camera in either wired or wireless mode,

allowing you to trip the shutter without

disturbing the camera. It’s ideal for taking

pictures of subjects that are dicult

to approach, such as wildlife. It also

eliminates vibrations caused by pressing

your camera’s shutter release button

during macro, close-up, and long-exposure

photography. The four-second delay

function is great for self-portraits.

The FreeWave Plus does

not require line-of-sight

alignment, as its radio

waves pass through and

around objects such as

walls, windows, and ﬂoors.

You can even trigger your

camera around corners.

The FreeWave Plus uses the 2.4GHz

wireless frequency for extended

range and reduced interference.

Your Vello FreeWave Plus

Wireless Remote Shutter Release

Kit contains:

Wireless Transmitter

Wireless Receiver

Camera Release Cable

4 AAA Batteries

INTRODUCTION

2.4GHz Radio Frequency: Reduced

interference and improved wireless

signal quality.

Extended Range: up to 100m (320 ft.)

16 Possible Channels: One transmitter

can trigger multiple receivers.

Built-in Antenna: Destruction-proof

internal antenna.

Dual-function Release: Press halfway to

focus; press fully to trigger shutter.

Delayed Release: Four-second delay

function gives you extra time to get

in position.

Multi-exposure: Take multiple shots with

one press of the trigger.

Long Exposure: Control the length of the

exposure remotely.

Multi-function: Trigger your camera

wirelessly or wired. Wired triggering

works even if the battery is dead or

missing.

Versatile: One receiver works with dozens

of camera models. Just swap out the

camera release cable.

LED indicators: Conﬁrm pre-focus and

exposure during wireless mode.

KEY FEATURES

Set the DIP switch located in the battery

compartment of the Transmitter and

Receiver. The DIP switches set a dierent

radio frequency for each Transmitter/

Receiver pair, so that multiple sets of the

FreeWave Plus can be used simultaneously.

You can use a pen to set the DIP switches

to your desired code. Any combination

will work so long as the switches are set

identically in both the Transmitter and

Receiver of a single FreeWave Plus set. A

total of 16 dierent combinations can be

selected.

Insert 2 AA batteries into both the

Transmitter and Receiver.

BEFORE YOU BEGIN

• There are no user-serviceable parts

inside the devices. Do not attempt to

disassemble or perform any

unauthorized modiﬁcation.

• Do not operate the FreeWave Plus in

the presence of ﬂammable gas or vapors.

• Do not handle with wet hands or

immerse in or expose to water or rain.

Failure to observe this precaution could

result in ﬁre or electric shock.

• Keep out of the reach of children. This

device contains small parts which may

pose a choking hazard.

• Observe caution when handling

batteries. Batteries may leak or explode

if improperly handled. Use only the

batteries listed in this manual. Make

certain to align batteries with correct

polarity.

• Batteries are prone to leakage when fully

discharged. To avoid damage to the

product, be sure to remove the batteries

when leaving the product unattended for

prolonged periods or when no charge

remains.

• Do not use or leave the devices in

conditions of extreme heat, severe cold,

or high humidity.

• Turn o the camera’s power before

inserting or removing the remote cord.

• Dispose used batteries, packaging,

and old devices in accordance with

appropriate local environmental

regulations.

SAFETY WARNINGS

FEATURES DIAGRAM

Battery Compartment

1Single Shot

2 Continuous Shooting

3 Bulb Shooting

4 Self Timer

Mode Selector

Battery Compartment

Power Button

Conﬁrmation LED

Power Button

Receiver

Transmitter

Shutter Button

Conﬁrmation LED

12 3 4

Turn ON the Receiver: Press and hold

the Power button for 2 seconds. The

LED will ﬂash red at 2 second intervals to

indicate that the receiver is working.

To power down after use, Press and hold the

Power button for 2 seconds. The LED will

ﬂash 4 times in quick succession, to indicate

that it is powering o.

There is no need for a power button

on the transmitter. The Transmitter

is always ready to ﬁre and uses power

only when you press the focus/shutter

release button.

POWERING ON & OFF

Press and hold the

Power button for 2 seconds

to power up the Receiver.

If using the FreeWave wirelessly, mount

the Receiver on your camera’s hot shoe,

facing forwards or backwards.

If your camera’s hot shoe is in use, you

can use an accessory shoe to attach the

Receiver to your camera, tripod, or other

suitable surface.

With your camera and Receiver OFF,

connect the shutter release cable’s

sub-mini plug end to the Receiver, and

the other end to your camera’s shutter

release jack. Power up your camera and

Receiver.

MOUNTING THE RECEIVER

1.Turn on the Receiver by pressing and

holding the Power button until the

LED lights up.

2. Set the Transmitter to Single Shot.

3. Set your camera to the Single Shot

setting.

4. Press and hold the Transmitter’s

shutter release button halfway to wake

or focus your camera (if set to Auto

Focus).The LED will turn green.

5. Fully depress the shutter button on the

Transmitter. The LED will turn red and

the shutter will be triggered.

SINGLE SHOTS | WIRELESS

1.Turn on the Receiver by pressing and

holding the Power button until the

LED lights up.

2. Set the Transmitter to Self Timer

mode.

3. Set your camera to the Single Shot

setting.

4. Press and hold the Transmitter’s

shutter release button halfway to wake

or focus your camera (if set to Auto

Focus). The LED will turn green.

5. Fully depress the shutter button on

the Transmitter. The LED will turn red

and the shutter will be triggered after a

four-second delay.

FOUR SECOND DELAY | WIRELESS

Andere Handbücher für FreeWave Plus

Inhaltsverzeichnis

Andere Vello Fernbedienung Handbücher

Vello

Vello IR-M Bedienungsanleitung

Vello

Vello selfie trigger Installations- und Betriebshandbuch

Vello

Vello IR Selfie Trigger Plus IR-SPC Bedienungsanleitung

Vello

Vello IR-N2 Bedienungsanleitung

Vello

Vello Freewave Fusion Pro Bedienungsanleitung

Vello

Vello Freewave micro Bedienungsanleitung

Vello

Vello IR-S1 Bedienungsanleitung

Vello

Vello IR-STV Bedienungsanleitung

Vello

Vello IR-01 Bedienungsanleitung

Vello

Vello FreeWave Fusion Basic Bedienungsanleitung

Vello

Vello IR-P1 Bedienungsanleitung

Vello

Vello IR-C2 Bedienungsanleitung

Vello

Vello shutterboss version ii Bedienungsanleitung

Vello

Vello FreeWave Plus Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung