Vent-Axia VAFH2TC Bedienungsanleitung
230V/1/50Hz
READ INSTRUCTIONS IN CONJ UNCTION WITH ILLUSTR ATIONS
READ AND SAVE THESE INSTRUCTIONS
Stock Ref. N°
42 67 15
VAFH2TC
PORTABLE FAN HEATER
User Instructions
2
Safety
READ THESE INSTRUCTIONS CAREFULLY
THIS FAN MUST NOT BE USED IN A BATHROOM, SHOWER OR
SWIMMING POOL AREA.
Do NOT handle the appliance with wet hands.
Do NOT use the appliance in workshops or rooms where excessive dust
is generated or present.
Do NOT locate the heater immediately below a fixed socket outlet.
Do NOT use the heater outdoors
When this appliance is used by or near young children or infirm
persons, close supervision is necessary.
While using the heater, make sure that the electric lead does not come
into contact with the body of the unit.
The front grille may become very hot if the heater is used over extended
periods of time. Never place clothing or similar objects over the heater.
Covering the heater may cause a fire.
In your own interests place the heater at least 50cm away from
flammable objects. Ensure that the air intake and outlets are
unobstructed at all times.
IMPORTANT-ALWAYS RETAIN YOUR USER INSTRUCTIONS FOR FUTURE REFERENCE
Connection to Power Supply
Ensure that your Vent-Axia heater is connected to the same power supply as shown on the rating label.
This fan heater is double insulated and therefore does not require earthing.
3
Fan heater Operation
1. Make sure selector switch is in the “O” off position and plug the appliance in.
2. Turn the selector switch into the desired position (Fan, Low or High) heat
settings.
3. To set the thermostat to the temperature required, turn the thermostat control
clockwise to its upper limit The heater will now switch on and the power
indicator will light. Allow the heater to run for a period of time until you feel the
desired room temperature has been reached.
4. Then turn the thermostat knob anti-clockwise until you hear a click, the
desired temperature is then set and the heater is in the stand-by mode.
5. When the ambient temperature drops lower than the setting the heater will
restart automatically to maintain the temperature.
6. Always turn the selector switch to “O” off position and unplug the heater after
use.
Over-heating protection
In case of overheating, the thermal cutoff and thermal fuse protection turns the appliance off automatically. If
overheating occurs, turn selector switch to ”O”, off position, remove the plug from the socket and let the
appliance cool down for approximately 30 minutes. Then plug in and switch on the appliance. If this recurs,
contact an electrically qualified/competent person to carry out an inspection of the heater.
Maintenance and Care
1. The fan only needs regular outside cleaning.
2. Before cleaning, turn power off unplug and wait for the appliance to cool.
3. Clean the outside of the heater with a damp cloth or duster.
4. Clean the air inlet and outlet opening regularly with a vacuum cleaner, using the brush attachment.
5. Do not use detergents or chemicals to clean the surface of the fan heater.
6. If you do not intend on using the heater over an extended period of time, make sure it is protected
from excessive dust and dirt.
4
Head Office: Fleming Way, Crawley, West Sussex RH10 9YX
Tel: 01293 526062 Fax: 01293 551188
Internet site at: www.vent-axia.com
VENT-AXIA SALES CENTRES
ENGLAND & WALES NATIONAL CALL CENTRE SCOTLAND
Newton Road, Crawley
West Sussex Telephone: 0141 429 1166
RH10 9JA Fax: 01293 565169
Telephone: 01293 530202 REPUBLIC OF IRELAND
Fax: 01293 565169 Vent-Axia Ventilation Ltd.
921 Western Road Industrial Estate
NORTHERN IRELAND Naas Road, Dublin 12.
Telephone: 02890 402220 Telephone: (01) 450 4133
Fax: 01293 565169 Fax: (01) 450 4570
Did you find these instructions easy to use?
We value your comments, contact us via :
The Vent-Axia Guarantee
Applicable only to products installed and used in the United Kingdom. For details of the Guarantee outside of the
United Kingdom contact your local supplier.
Vent-Axia guarantees this product for one year from the date of purchase against faulty material or workmanship.
In the event of any part being found to be defective, the product will be repaired, or at the Company’s discretion
the product will be replaced without charge, provided that the product:
1). Has been installed and used in accordance with the instruction given with each unit.
2). The electricity supply complies with the rating label.
3). Has not been misused, neglected or damaged.
4). Has not been modified or repaired by any person not authorised to do so by Vent-Axia.
IF CLAIMING UNDER THE TERMS OF THE GUARANTEE
Please return the complete product, carriage paid to your original supplier by post or in person. Please ensure that
it is adequately packed and accompanied by a letter clearly marked ‘Guarantee Claim’ stating the nature of the
fault and providing proof of the date and source of purchase.
As part of the policy of continuous product improvement Vent-Axia reserve the right to alter specifications without notice
426716A 0903
Inhaltsverzeichnis
Andere Vent-Axia Heizung Handbücher
Vent-Axia
Vent-Axia Optimax Plus Storage VASH050E Bedienungsanleitung
Vent-Axia
Vent-Axia CSH12 Handbuch
Vent-Axia
Vent-Axia VAPL2TC-S Montageanleitung
Vent-Axia
Vent-Axia Warmair4.5 Bedienungsanleitung
Vent-Axia
Vent-Axia Optimax Plus VAPH50TE Bedienungsanleitung
Vent-Axia
Vent-Axia 2kW Bedienungsanleitung
Vent-Axia
Vent-Axia OPAL VAPHMT Montageanleitung
Vent-Axia
Vent-Axia HR25H Montageanleitung
Vent-Axia
Vent-Axia SUNB2000BL Bedienungsanleitung
Vent-Axia
Vent-Axia VAIR15B Bedienungsanleitung
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung