Veripos LD5 Bedienungsanleitung

LD5

Operation

Manual

(A & B Variants)

VERIPOS

Rev No:

G11

Page 2

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

G11

12.01.2017

VERIPOS Software

Compatibility section updated

G10

01.09.2016

B Variant information added

04.05.2016

Data logging info updated

24.03.2016

Document title changed to

show applicable LD5

software version

14.10.2015

Added info for LD5 variant B

10.08.2015

Added NMEA message info

01.07.2015

Minor changes

12.06.2015

Data logging info added

WEE WEEe

09.12.2014

Minor formatting changes

11.11.2014

Updated for Phase 5

Software

28.01.2014

Amended Serial Pin-outs

REVISION

DATE

DESCRIPTION

ORIGINATOR

CHECKED

APPROVED

CLIENT

APPR

Document Title:

LD5 Operations Manual (A & B Variants)

File Ref:

AB-V-MA-00539

Rev No:

G11

Page 3

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

Table of Contents

1INTRODUCTION............................................................................................3

1.1 GENERAL .....................................................................................................3

1.2 SCOPE .........................................................................................................3

1.2.1 Contents.............................................................................................3

1.3 TERMS AND ABBREVIATIONS...........................................................................4

1.4 DOCUMENTCONVENTIONS.............................................................................6

1.4.1 Typographical conventions .................................................................6

1.4.2 Special notices ...................................................................................6

1.5 VERIPOSHELPDESK...................................................................................6

1.6 VERIPOSONLINE SUPPORTSYSTEM

(VOSS)

................................................7

1.7 ENABLINGTHE EQUIPMENTFOR

USE

...............................................................7

1.8 WASTE ELECTRICAL AND ELECTRONICEQUIPMENT ..........................................8

1.9 DISCLAIMER..................................................................................................9

2LD5 OPERATION ........................................................................................11

2.1 LD5 VARIANTS ...........................................................................................11

2.1.1 Available LD5 Variants.....................................................................11

2.1.2 Identifying LD5 Variant.....................................................................13

2.2 MODES ......................................................................................................14

2.3 SATELLITE CONSTELLATIONS.......................................................................15

2.4 VIEWS AND CONTROLS ................................................................................16

2.5 LD5START UP ............................................................................................18

2.5.1 LD5 Mode selection..........................................................................19

2.6 L-BAND RECEIVER ......................................................................................20

2.6.1L-Band / Status / Module Info...........................................................20

2.6.2L-Band / Status / Device Status........................................................20

2.6.3 L-Band / Config / RTCM Stations.....................................................20

2.6.4L-Band / Config / Beam selection.....................................................21

2.6.5 L-Band / Config / Antenna Bias........................................................22

2.6.6 L-Band / Access Info ........................................................................22

2.6.7 L-Band / Help ...................................................................................22

2.7 GNSSRECEIVER........................................................................................23

2.7.1 GNSS / Status / Module Info............................................................23

2.7.2 GNSS / Status / SV Info ...................................................................24

2.7.3 GNSS / Status / Position Info ...........................................................25

2.7.4 GNSS / Status / DOP Values ...........................................................26

2.7.5 GNSS / Status / Masks.....................................................................26

2.7.6 GNSS / Config..................................................................................27

2.7.7 GNSS / Config / PPS........................................................................27

2.7.8 GNSS / Config / PPP Config.............................................................28

2.7.9 GNSS / Config / SBAS/RTK..............................................................29

2.7.10 GNSS / Config / NMEA Config.......................................................30

2.7.11 GNSS / Config / NMEA...................................................................30

2.7.12 GNSS / Help...................................................................................31

2.8 MF BEACON (IALA) RECEIVER CONFIGANDSTATUS.......................................32

2.8.1 MF / Status / Module Info .................................................................32

2.8.2 MF / Status / Device Status..............................................................32

2.8.3 MF / Config / Mode...........................................................................33

2.8.4 MF / Config / Manual Tune...............................................................34

2.8.5 MF / Config / Station Tune ...............................................................34

2.8.6 MF / Config / Antenna Bias ..............................................................34

2.8.7 MF / Help..........................................................................................34

2.9 LD5 CONFIG ..............................................................................................35

2.9.1 Config / I/O .......................................................................................35

2.9.2 Config / I/O / COM1 COM2 or COM3...............................................35

2.9.3 Config / I/O / EXT RTCM..................................................................37

Rev No:

G11

Page 4

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

2.9.4 Config / Network...............................................................................38

2.9.5 Config / Reboot ................................................................................38

2.9.6 Config / Admin..................................................................................38

2.9.7 Config / Admin / Logging..................................................................38

2.9.8 Config / Config..................................................................................41

2.9.9 Config / USB Mode...........................................................................41

2.10 LD5 USE WITH RTK CORRECTIONS ...........................................................42

3 VERIPOS SOFTWARE COMPATIBILITY...................................................44

4TROUBLESHOOTING..................................................................................45

4.1 OVERVIEW OF TROUBLESHOOTING ...............................................................45

4.1.1 Hardware..........................................................................................45

4.1.2 Power faults......................................................................................45

4.1.3 Enable/disablefaults.........................................................................46

4.1.4 L-band signal faults...........................................................................46

4.2 VERIPOS HELPDESK.................................................................................48

5REFERENCEINFORMATION .....................................................................49

5.1 SERVICE ACCESS LICENCE AND SERVICE NOTIFICATIONFORM ........................49

5.1.1 Service access license .....................................................................49

5.1.2 Service notification form ...................................................................49

5.2 GLOBAL COVERAGE

CHART

.........................................................................50

5.3 COMPORTS ..............................................................................................51

5.3.1 LD5 COM and IP sockets.................................................................51

LD5 COM ports ............................................................................................53

5.4 LD5 MENU STRUCTURE...............................................................................54

5.5 NMEA SENTENCES ....................................................................................58

6CONTACT

INFORMATION

..........................................................................66

6.1 VERIPOS

ELPDESK

.................................................................................66

6.2 VERIPOS OFFICE LOCATIONS ....................................................................66

6.2.1 VERIPOS UK ...................................................................................66

6.2.2 Additional VERIPOS Offices...............................................................66

Rev No:

G11

Page 3

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

1 Introduction

1.1 General

This manual is applicable to LD5’s which are A or B variants. For LD5 C

variants, please refer to the LD5 (C Variant) Operations manual. For

installationguidance please see the LD5 Installationmanual, which applies to

all LD5 variants.

An LD5 Quick Guide is also available which provides basic information

regarding some LD5 menus, data outputs etc.

The latest copies of all LD5 related manuals can be downloaded from

VERIPOS Online Support System (VOSS) http://help.veripos.com .

Throughout this manual reference will be made to the VERIPOS Helpdesk.

The Helpdesk is provided by VERIPOS as the first point of contact for

technical enquiries and assistance. It is manned 24 hours per day, 365

days per year.

Details are in the Contact information chapter.

1.2 Scope

This LD5 (A & B Variant) Operations Manual comprises information on

connecting the unit, beam and access code entry, COM and IP ports and

a quick guide.

1.2.1 Contents

Chapter Contents

1. Introduction Specifies the purpose and target group for the

manual. It also contains a list of used

abbreviations and a specification of the document

conventions.

2. Operation Describes the interfaces in detail, the start-up,

the status indicators and possible corrective

actions and how to shut the system down.

3. Compatible Software Describes the VERIPOS visualisation software

which is compatible with the LD5 (A & B

variants).

4. Troubleshooting Describes basic fault tracing and a detailed

description on how to report problems or

queries to the VERIPOS Helpdesk.

5. Reference information Comprises additional information such as

additional configuration, station ID listings.

6. Contact information Contains contact information for the VERIPOS

Helpdesk and VERIPOS offices worldwide.

Rev No:

G11

Page 4

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

1.3 Terms and abbreviations

ALF VERIPOS proprietary logging format

APEX A Veripos PPP DGNSS service using GPS

APEX² A Veripos PPP DGNSS service using GPS and GLONASS

DGPS Differential GPS

DGNSS Differential GNSS

DOP Dilution of Precision

EIA Electronics Industry Association (this document uses the

previous terminology “RS”that is generally recognized in

the industry)

GDOP Geometric Dilution of Precision

GLONASS Global Navigation Satellite System –Russian equivalent to

GPS

GPS Global Positioning System

GNSS Global Navigation Satellite System

HDOP Horizontal Dilution of Precision

Hz Hertz

IMU Integrated Mobile Unit

LAN Local Area Network

L-Band Radio frequency band, 1GHz to 2GHz, as used for

Veripos correction data transmitted from communication

satellites

MF Medium Frequency radio band, 300kHz to 3MHz, as used to

transmit IALA / Beacon correction data from land stations

MHz Megahertz

MMI Man Machine Interface

NBF Novatel Binary Format

NMEA National Marine Electronics Association

N/A Not applicable

PDOP Position Dilution of Precision

PPP Precise Point Positioning

PPS Pulse per Second

PRN Pseudo Random Noise

RoHS Restrictions of Hazardous Substances

RTCM Radio Technical Commission for Maritime Services

SAL Service Access License

SBAS Satellite Based Augmentation System (for example

WAAS/USA. EGNOS/Europe and MSAS/Asia)

SD Standard Deviation

SNF Service Notification Form

SNR Signal to Noise Ratio

Spotbeam High Power L-Band Signal transmitted from a satellite

Standard / Std Veripos Single Frequency DGPS System using GPS

Standard2/ Std² Veripos Single Frequency DGPS System using GPS and

GLONASS

SV Space Vehicle

Ultra A Veripos PPP DGNSS service using GPS

Ultra² A Veripos PPP DGNSS service using GPS and GLONASS

Rev No:

G11

Page 5

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

USB Universal Serial Bus

UTC Coordinated Universal Time

VDOP Vertical Dilution of Precision

VERIPOS Global DGPS service provider

VOSS VERIPOS Online Support System

WAAS Wide Area Augmentation System (SBAS implementation in

USA)

WEEE Waste Electrical and Electronic Equipment

WER Word Error Rate

Rev No:

G11

Page 6

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

1.4 Document conventions

1.4.1 Typographical conventions

Italic or bold text is used to emphasizecertain parts of the information.Italic

is also used in cross-referencesto other parts of the document.

Bold text is also used for indicators and touch screen “push-button”

commands.

“Text within quotes” is used when display screens are mentioned in text.

Monospace

text is used for input/output strings to/from the device.

1.4.2 Special notices

WARNING

A warning indicates the risk of bodily harm or serious damage to the

hardware.

CAUTION

A caution indicates the risk of damaging the hardware.

NOTE

A note shows important information that helps you make better use of the

system.

1.5 VERIPOS Helpdesk

VERIPOS encourageall users to promptly report problems or operating

queries to the Helpdesk so that they may receive assistance.

The VERIPOS Helpdesk is the first point of contact for technical enquiries and

fault reports. It is manned 24 hours per day, 365 days per year.

Helpdesk contact details are in the Contact information chapter.

For initial assistance with troubleshooting see the Troubleshootingsection in

this manual. If the troubleshooting section does not resolve the issue contact

the VERIPOS helpdesk for further assistance.

Users can also create a fault ticket on the help.veripos.com web site. This will

ensure contact details and the description of the fault are correctly recorded.

The Helpdesk duty operator is trained to provide direct assistance with most

queries and problems,and can request technical staff to provide support for

more complex issues.

Rev No:

G11

Page 7

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

1.6 VERIPOS Online Support System

(VOSS)

VERIPOShave an online customer support system called VOSS (VERIPOS

Online Support System).

VERIPOSrecommendusers to frequentlyview the announcementsmade

on this system, such as updated manuals.

VOSS includes a facility for raising fault tickets which are then

automatically submitted to the VERIPOS Helpdesk.

The VOSS url is: http://help.veripos.com

VOSS has comprehensive help and assistance that

provides:

•Updates on VERIPOS service availability and notifications

•Knowledge base

•Trouble-shooter

•Downloads

•Online fault reporting.

1.7 Enabling the equipment for

use

VERIPOS correction signals are provided as a chargeable

service.

In order for the equipment to decode correctionsand output positions it must

be enabled.

The enable/disable procedure is detailed in section 2.6.2 onwards.

When the Veripos services are not required some contracts may allow

for disabling the service to avoid charges.

NOTE

To use VERIPOS correction signals a contract between the user’s company

and the VERIPOS Operations department must be in place. VERIPOS call

this a service access license (SAL).

To avoid delays users should record the SAL number associated with the

VERIPOS equipment.

The Helpdesk is not authorised to issue a code unless an active SAL

exists and its reference number can be determined.

Rev No:

G11

Page 8

Date:

12.01.2017

LD5 Operation Manual (A & B Variants)

1.8 Waste electrical and electronic equipment

The Waste Electrical and Electronic Equipment Directive (hereinafter

referred to as the “WEEE directive”) places an obligation on EU-based

manufacturers, distributors, retailers and importers to take back electronic

products at the end of their useful life. A sister directive, RoHS (Restriction

of Hazardous Substances) complements the WEEE directive by banning the

presence of specific hazardous substances in the products at the design

phase. The WEEE directive covers all VERIPOS products imported into the

EU as of August 13 2005. EU-based manufacturers, distributors, retailers

and importers are obliged to finance the costs of recovery from municipal

collection points, reuse, and recycling of specified percentages per the

requirements contained in the WEEE Directive.

Instructions for disposal of WEEE by users in the European Union

Products which have the undernoted symbol located on either the product

itself or its packaging indicates that the product must not be disposed of with

other waste. Instead, it is the user’s responsibility to dispose of the product

by handing it over to a designated collection point for the recycling of

WEEE.

The separate collection and recycling of your WEEE at the time of disposal

will help to conserve natural resources and ensure that it is recycled in a

manner that protects human health and the environment. For more

information about recycling centres, please contact the local city office, the

household waste disposal service or the product supplier.

Andere Handbücher für LD5

Inhaltsverzeichnis

Andere Veripos Steuereinheit Handbücher

Veripos

Veripos LD6 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung