VESAG ADWAT102C Bedienungsanleitung
ADWAT102CWATCH USER
MANUAL
1
ACTIVATION PROCESS
•Goto http://www.vesag.com/
•Click on New user link which is next to login.
•Enter the given customer id and press tab so that the mobile no,
username and email id will pop up.
•Change the username to a new username, enter password, verify
password and enter the three security questions and answers and the call
in password which is used for call centre purpose.(Make sure you note
the details you entered especially the username and password)
•Make sure the agreement is checked and then click on submit.
•If the submit button do not work , please click on agreement and click YES
button on the pop up window and then click submit again.
•Once you submit, it will take you to login page where you can just put the
new username and password and login.
2
CONTENT
I. GENERAL
1. Notices
2. About the Watch
3. Product Features
4. Product Specifications
5. Others
II. USAGE PREPARATIONS
1. Accessories
2. Appearance and Interface
3. Interface Definition
III. BATTERY USAGE
1. Charge the Battery
2. Notice
IV. OPERATION METHOD OF BASIC FUNCTIONS
1. Setting Up The Watch
2. Location Inquiry
3. Adjust Receiver Volume
4. Function Settings
5. Zigbee Interface
6. Medicine Reminder
7. Time Zone
8. ECG Interface
9. Low-Voltage Alarming Functions 3
o Vesag watch is a perfect combination of CDMAand GPS
technologies. This model, with its precise dimensions and
compact appearance, expresses the advanced workmanship
in the CDMAand GPS field. It is a typical design combining
communication products and GPS services.
I.GENERAL
4
1.1.NOTICES
•Please read this user manual carefully and always
use correct operation methods to prevent any
possible errors.
• This user’s manual is for reference only. If some
contents and operation steps are inconsistent with
those for the actual product, the latter will prevail.
5
1.2.ABOUT THE WATCH
•Vesag watch as a personal remote positioning device made up
of GPS module and CDMA module, is compact in
dimensions with high accuracy. This watch is portable and
one can wear it on the wrist or as a pendant. The location of
the wearer can be tracked with this watch through the built-
in GPS tracker. Medicine reminders can be set in it to remind
the patient of the time when he has to take some medicine or
has to go in for some health check up. While the health is
being monitored, an alarm from the watch can signal bad
health. In case this happens, the elderly and your loved ones
in problem can be taken to the hospital on time and their life
can be saved. Web portals can be used to set reminders in the
digital health monitoring watch.
6
1.3.PRODUCT FEATURES
•Inbuilt GPS Module
•Internet positioning service center, used to receive and send positioning
information
•The modem supports Quad frequency bands, i.e.
CDMA Band Class 0 and Band Class 1.
•High-sensitivity, new workmanship and the most advanced GPS chip
•Can work effectively in limited space such as urban canyon
•Low energy consumption
•Fast signal acquisition
•Supports single positioning and continuous tracking;
•Supports alarming and remote monitoring
•Supports fast dial button
•Supports the location information inquiry by SMS and Internet
•May monitor without disturbing the tracked person and realizes real-time
tracking.
•Can position the holder by call or SMS
7
1.4.PRODUCT SPECIFICATIONS
8
Wireless module: Telit DE910 DUAL 800/1900 MHz 1xRTT and EV-DO Rev. A support.
GPS: GPS One, Standalone GPS and GLONASS support. Software based Wi-Fi and Cell tower triangulation.
Short Range Wireless: Texas Instruments CC2530 ZigBee System on chip. Interacts with any ZigBee Pro devices
Processor and Memory: ARM Cortex M3, 32Bit 72MHz frequency, 512K flash memory and 2MB EEPROM.
Display: OLED, Size: 1.69”, 160*128 Pixels, Color Depth: 262,144 colors.
Battery: 650 mAH, 3 to 4 days standby time. 3 Hours talk time
Dimensions (L*W*H): 58.9*46.5*13.9 mm Strap: 132.9mm and 85.5mm
Sensors
Accelerometer.
±2 / ±4/ ±6 / ±8/ ±16 g linear acceleration full scale
Gyroscope
±245 / ±500 / ±2000 dps angular rate full scale
Magnetometer
±2 / ±4 / ±8 / ±12 gauss magnetic full scale
UV Sensor
The UV Index is a number linearly related to the intensity of sunlight reaching the earth. Values range from 1 to 11
Ambient Light Sensor
100 mlx resolution possible, allowing operation under dark glass
Proximity Sensor
Proximity detection adjustable from under 1 cm to over 50 cm
Temperature Sensor
High Accuracy Temperature Sensor. ±0.4 °C; (max), –10 to 85 °C
Humidity Sensor
Precision Relative Humidity Sensor, ±3% RH (max), 0 –80% RH
II.USAGE PREPARATION
9
•Main unit
•USB cable
•Charger
•Headset cable (optional)
•Battery
2.1.ACCESSORIES
10
Inhaltsverzeichnis
Andere VESAG Betrachten Handbücher
