Vesper CORTEX H1 Bedienungsanleitung

QUICK-START GUIDE

H1 TETHERED HANDSET

H1P PORTABLE HANDSET

Getting to know the handset

1 Distress

2 Speaker

3 Lanyard Loop

4 Volume Up

5 Volume Down

6 Power

7 Push to Talk PTT

8 Menu

9 Click-wheel

10 Back

11 VHF (VHF Radio key)

12 Power light (Red)

Also ambient light sensor

for auto dimming.

13 Touchscreen

14 Microphone

15 Call* (Hold down for DSC

menu shortcut)

16 Enter

17 Channel 16

18 Man Overboard (MOB)

*Hold down for DSC menu

shortcut. Otherwise use when

a target is selected or on a

Colision avoidance or MOB

screen to initiate a call.

Vesper Marine releases product updates from time to

time. These updates often add new features. Please

note the images in this guide might differ to what you

see on your product. To be notified when an update

is available please register your Cortex at www.

vespermarine.com/register.

Visit www.vespermarine.com/faqs for answers

to frequently asked questions, technical support,

downloads, local dealer contacts and more.

Questions and FAQ's

1 Turn Cortex M1 ON

Switch the vessel's batteries ON to power the M1.

2 Turn the handset ON

Press and hold the Power button for 2 seconds.

3 Select WiFi from the Status Bar

4 From the list of available WiFi, identify and select

the M1 WiFi SSID.

Note - The WiFi SSID is identified by the

M1 serial number eg: CORTEX-95211616

Note - The Cortex V1 package (M1+H1) ships with

the handset pre-configured to the M1.

5 Key the WiFi Password found on the label

supplied with the M1.

6 Select CONNECT to save.

Text ‘connected’ will confirm the connection.

7 Select the Back key to close the WiFi status.

To connect a handset to an M1

WiFi status

Main Menu

Select the Main Menu button ( ) on the keypad or the

Main Menu icon ( ) on the left of the Status Bar.

Standard functions:

> Plotter (Plotter view of AIS targets)

> Directory (AIS targets and manual DSC

contacts)

> VHF (VHF Radio)

> Instruments (GPS, integrated sensors and

NMEA data )

Situational functions:

> Anchor watch (Monitor the vessel at anchor)

> Collision avoidance (Assess and manage a potential

collision scenario)

> MOB (Man Overboard monitoring)

The Configuration Menu is used for initial setup and

system monitoring including AIS programming, network

settings and sensor setup.

> Main Menu ( ) > touch on the wrench icon ( )

to open the Configuration Menu.

Status Bar

The Status Bar is available from any screen for swift

access to the important information.

1 Menu

2 VHF Channel and Transmission Power (H or L)

3 Transponder status (example pictured)

Transponder receive only mode (Stealth mode)

is controlled (on/off) from within this menu.

4 WiFi status (Select, connect and confirm M1 WiFi)

5 Battery status (H1P only)

The Power light (above touchscreen) indicates:

6 GPS status

Satellite view and GPS settings

7 Alarm status

1 2 543 6 7

Solid Idle mode / Charging

Pulsing Discharging off cradle

Flashing Discharging on cradle

VHF

Loud, clear and easy to operate VHF radio engineered

for the harsh marine environment.

1 Your Vessel Details

2 Transmission Power

3 Push to Talk

4 Last Channel

5 Channel Presets

6 Change Channel

(Or via touchscreen)

7 VHF (VHF Radio key)

8 Selected Channel

(Swipe to change or

use click-wheel)

9 VHF Mute

(alarms still active)

10 Dual Watch

11 VHF Settings

12 Call (Initiate DSC Call)

13 Channel 16

1 Select VHF

Select via a keypad button (VHF)

or the Main Menu.

2 Select the appropriate channel

You can also press the PTT key from

any screen if the required channel is already

selected to bypass steps 1 and 2.

3 Verify the channel is clear

You cannot obstruct the communications of

other channel users due to Federal Communications

Commission (FCC) and international guidelines.

4 Press the Push To Talk (PTT) key

‘Transmitting’ is displayed.

5 Speak into the handset

6 Release the PTT key

To make a VHF call

Push To

Talk (PTT) .

To send an individual DSC call

1 Select the Plotter or Directory screen

2 Select an AIS target (Fig.1 & 2)

3 Select the Call icon (Fig.3)

4 Follow the on screen instructions to confirm or

change the target vessel MMSI and channel

5 Select the CALL icon when ready

Once you activate CALL, the DSC Individual Call

screen monitors the status of your DSC call.

> If your Individual DSC call is unanswered you

may RESEND.

> If your Individual DSC call is answered you

may CONTINUE CALL or select END CALL.

> END CALL ends the DSC call and opens the

VHF screen on the requested channel.

Fig. 3Fig. 2Fig. 1

Note - DSC can also be swiftly accessed from the Plotter,

Directory and Situational screens.

The CALL button can also be used, hold it down to

access the DSC menu.

> Select the target > CALL the target

> >

Instruments

The M1 has internal sensors for barometric pressure

and heading. The M1 also receives data (PGNs) from

instruments on the NMEA network.

1 Instrument Fields

Each field is customizable from available sensors

on board. Options include:

• Depth • COG • SOG

• Heading • Speed • Apparent Wind

• True Wind • Ground Wind • Water temp

• UTC • Position • Voltage

2 Field Lock

Select the icon to lock and unlock each instrument

view. Swipe through available instruments.

3 Instrument Settings

Select an instrument layout:

View AIS targets with smartAIS filtering (adjustable).

Select any vessel to make a direct DSC call.

1 Number of Targets

2 Class A Vessel

3 Target Speed

4 Class B Vessel

5 Your Vessel

6 Vector Line

Position a target will

be in 10 minutes.

7 Range Markers

8 Plotter Settings

Orientation, Declutter,

Collision Profile,

Alarm settings

Plotter

<5 Knots

5-9 Knots

10-14 Knots

15-19 Knots

<20 Knots

Class A

Class A Towing

Class B Power

Class B Sail

Andere Handbücher für CORTEX H1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vesper Mobilteil Handbücher

Vesper

Vesper CORTEX H1 Bedienungsanleitung

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung