Vetek ERT DYNALINK Bedienungsanleitung

Technical manual

Nordens största webbshop för vågar

Hantverksvägen 15,

76493 Väddö, Sverige Tel. +46 (0)176-208920

Web www.vetek.se

Email [email protected]

TECHNICAL MANUAL ERT DYNALINK

With optional remote display

Technical_Manual_ERT_V2

Technical manual

Web www.vetek.se

Email [email protected]

Wireless dynalink technical manuals

This manual is designed to provide the reference for internal production line member to debugging and testing, or reference for

large-scale dealers, agents to maintenance and parameter setting. Please note that the confidentiality of information, avoid user

mishandling to affect the accuracy of product.

1．Remote Setting

In addition to the function of the remote control which is mentioned in user manual, there are many other function in the wireless

handle instrument for production line member and large-scale dealers, agents to use. it can be used to control the dynalink 3

point calibration, voltage calibration, RF parameter setting and default parameter storage .Using method as following:

Power on the DYNALINK first, then press [PEAK], [MODE] and [ON/OFF] key 3 seconds.

KEY

DISPLAY

ILLUSTRATION

Press

[PEAK][MODE]

[ON/OFF] 3SecondS

〖00000〗

After display〖00000〗can release key

〖88888〗

Display Twice

〖Ert 〗

Display Twice

〖u 3.2〗

Display Current DYNALINK Software version

〖U X.XX〗

Display Current DYNALINK DC voltage

〖SEtdC〗

DC voltage calibration

Press [ENTER] key start DC voltage calibration procedure

Press [ENTER]

〖U AdJ〗

DYNALINK and handle instrument Display

synchronization

[ENTER]

〖U X.XX〗

Display voltage value, press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖SEtdC〗

Storage voltage value, DYNALINK return back normal

status

Following start to DYNALINK RF setting

Press[MODE]

〖SEtrF〗

DYNALINK RF parameter setting

[ENTER]

〖CH E3〗

Display current wireless channel(default is E3)Can be

selected from 00 to FF, press [ZERO] to adjust digit,

press [TARE]to move digit

[ENTER]

〖AddrH〗

Address code high 4bits,Used for wireless net, sole

instrument don’t adjust

[ENTER]

〖00CCC〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[ENTER]

〖AddrL〗

Address code low 4bits,Used for wireless net, sole

instrument don’t adjust

[ENTER]

〖CCCCC〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[ENTER]

〖pAirH〗

Pair code high 4bits,Used for wireless net, sole

instrument don’t adjust

Technical manual

Web www.vetek.se

Email [email protected]

[ENTER]

〖H0000〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[ENTER]

〖pAirL〗

Pair code low 4bits,Used for wireless net, sole

instrument don’t adjust

[ENTER]

〖L0000〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[ENTER]

〖bAud4〗

Bauds of wireless communication(for 433Mhz and

868MHz setting, bAud1: 1200bps,

bAud2:2400bps,bAud3:4800bps, bAud4:9600bps

[MODE]

〖SEtrF〗

Any time of above procedure, press[MODE]key，the

DYNALINK will return back to normal status, hand

instrument return to 〖SEtrF〗menu，press

[MODE]key to select〖ESC〗，press [ENTER]key

return to normal communication status，

Following start to 3 points calibration(countermeasure loadcell nonlinearity)

Press[MODE]

〖SEt3P〗

start to 3 points calibration procedure

[ENTER]

〖CAL 3〗

[ENTER]

〖CALSP〗

Zero position confirmation

[ENTER]

〖LoAd1〗

First time load

[ENTER]

〖XXX〗

Input first time load value，press [ZERO] to adjust

digit, press [TARE]to move digit

[ENTER]

〖LoAd2〗

Second time load，value need more than first time

value 20%

[ENTER]

〖XXX〗

Input second time load value，press [ZERO] to adjust

digit, press [TARE]to move digit

[ENTER]

〖LoAd2〗

Third time load，value need more than second time

value 20%

[ENTER]

〖XXX〗

Input third time load value，press [ZERO] to adjust

digit, press [TARE]to move digit

[ENTER]

〖XXX.X〗

Display the value after calibration, add one digit

Press[MODE]

to secelect

〖ESC〗

[ENTER]

〖XXX.X〗

Display the value after calibration, add one digit

[TARE]

〖XXX〗

Sub 1 digit, display normal data

Save DYNALINK Default setting and calibration data for user maintenance

OFF handle instrument first, then press[PEAK]、[MODE]、[ON/OFF] key 3 seconds

Technical manual

Web www.vetek.se

Email [email protected]

Press[MODE]

〖dFULt〗

Company default setting

[ENTER]

〖S dFL〗

Save default setting value

[MODE]

〖dFULt〗

After press [mode] key, DYNALINK save data and

return back to normal status，handle instrument return

back to menu status

Press[MODE]

to select

〖ESC〗

[ENTER]

〖XXX〗

handle instrument return back to normal

communication status

2．LOCAL Setting

After Remote setting ,if DYNALINK RF parameters are changed, the handle instrument will can not communicate with

DYNALINK, it must be set the parameters same as DYNALINK. setting method as following:

KEY

DISPLAY

ILLUSTRATION

[ZERO][TARE]

[ON/OFF]

〖00000〗

After display〖00000〗can release key

〖88888〗

Display Twice

〖Ert 〗

Display Twice

〖u 3.2〗

Display Current handle instrument Software version

〖U X.XX〗

Display Current handle instrument voltage

〖LOCAL〗

Local parameter setting

[MODE]

〖CH E3〗

Display current wireless channel(default is E3)Can be

selected from 00 to FF, press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖AddrH〗

Address code high 4bits,Used for wireless net, sole

instrument don’t adjust

[MODE]

〖00CCC〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖AddrL〗

Address code low 4bits,Used for wireless net, sole

instrument don’t adjust

[MODE]

〖CCCCC〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖pAirH〗

Pair code high 4bits,Used for wireless net, sole

instrument don’t adjust

[MODE]

〖H0000〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖pAirL〗

Pair code low 4bits,Used for wireless net, sole

instrument don’t adjust

Technical manual

Web www.vetek.se

Email [email protected]

[MODE]

〖L0000〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖U AdJ〗

Handle instrument DC voltage adjustment

[MODE]

〖U X.XX〗

press [ZERO] to adjust digit,

press [TARE]to move digit

[MODE]

〖bAud4〗

Bauds of wireless communication(for 433Mhz and

868MHz setting, bAud1: 1200bps,

bAud2:2400bps,bAud3:4800bps, bAud4:9600bps

[ENTER]

〖0〗

Save parameter value and return back to normal

communication status. if need to save parameter value

as company’s default setting

Just press [PEAK] and [ENTER]key 3 seconds

3．Recall handle instrument default value

If the handle instrument’s parameter were changed by wrong operation. User can recall company’s default value:

Switch off handle instrument, press [TARE] ,[ENTER] and [ON/OFF] key 3seconds,handle instrument will display L dFL and

automatic power OFF. Press [ON/OFF] key ,default value will be load into handle instrument.

4．Recall DYNALINK default value

If the DYNALINK’ s parameter were changed by wrong operation. User can recall company’s default value:

Switch off DYNALINK, then press[ZERO], [TARE] and [ON/OFF] key 3 seconds on DYNALINK overlay. The default value will

be load into DYNALINK

Andere Vetek Skala Handbücher

Vetek

Vetek VB2 Series Bedienungsanleitung

Vetek

Vetek XA Series Bedienungsanleitung

Vetek

Vetek VB2 Series Bedienungsanleitung

Vetek

Vetek AS Series Bedienungsanleitung

Vetek

Vetek OCS-P Series Bedienungsanleitung

Vetek

Vetek FR-H-100 Bedienungsanleitung

Vetek

Vetek ACS 20AYE Bedienungsanleitung

Vetek

Vetek VRH-300 Bedienungsanleitung

Vetek

Vetek LPWN-1530 Bedienungsanleitung

Vetek

Vetek RW-300 Bedienungsanleitung

Vetek

Vetek WBA-300 Bedienungsanleitung

Vetek

Vetek VC Series Bedienungsanleitung

Vetek

Vetek VRB-250 Bedienungsanleitung

Vetek

Vetek OCS-XZ-003 Bedienungsanleitung

Vetek

Vetek FR-MS Bedienungsanleitung

Vetek

Vetek WLC 1/A2 Bedienungsanleitung

Vetek

Vetek WB5040-SWP Bedienungsanleitung

Vetek

Vetek BABY 630 Bedienungsanleitung

Vetek

Vetek JKD 250 Bedienungsanleitung

Vetek

Vetek OCS-M Bedienungsanleitung

Vetek

Vetek VRB-20 Bedienungsanleitung

Vetek

Vetek VRS-300 Bedienungsanleitung

Vetek

Vetek CW263BT Bedienungsanleitung

Vetek

Vetek SELL Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung