3
Statement
According to the Universal Copyright Convention, without permission and written
consent, no content of this manual may be reproduced in any form (including
storage and retrieval or translation into the languages of other countries or
regions). This manual is subject to change in future versions without extra notice.
Caution
The "caution" sign indicates the condition and operation that will cause
damage to the instrument or equipment.
It requires that care must be taken when performing this operation. If it is not
performed correctly or this operation step is not followed, the instrument or
equipment may be damaged. Do not continue to perform any operation
indicated by the caution sign unless these conditions are met or fully
understood.
Please read the manual carefully and pay attention to the relevant safety
warning information before using the instrument.
Summary
This instrument is a compact hand-held 6000 count digital multimeter with high
performance and high reliability. It is equipped with overload protection circuit,
which can be used to measure AC and DC voltage and current, resistance, diode,
circuit connectivity test, non-contact electricity verification and live wire detection.
AC voltage is also equipped with VFD low-pass filter, Can be used to measure
inverter voltage, filter attenuation-0.94dB@1kHz.
Safety instructions
This instrument is designed and produced in strict accordance with the Safety
Standard IEC61010, and meets the safety standard of Overvoltage Standard 600V
CAT Ⅲand Pollution level 2.
Please use the instrument as this manual, otherwise the protection function
provided by the instrument may be reduced or invalid.
