VEVOR 3020 Bedienungsanleitung

The user manual of the desktop-CNC

Notice:

1. This machine should be used with the PC parallel port and controlled by Mach 3 or other software.

The PC parallel port should work in condition of the EPP mode, the setup of the EPP mode should be

applied on the main board B OS.

2. You’d better use the PC to control the machine, especially for this machine and do not install other

software if conditions permit. And please do not use the Laptop to control the machine, the battery of

some laptops will impact the pulse signal of the machine and the voltage of some parallel port is very low,

it will cause the lost of the signal.

Warn:

You should setup the software correctly, it will make the machine works well. f you do not do it well and

try to run the machine, it may damage the machine or cause the danger.

When you install or setup the machine, please do not turn on the control box, it may cause some

damages.

Please do not put the connectors on the control box, when it is power on. You should regulate the

spindle as the low speed when you want to restart it. The interval of the open/close button time should be

at least 30s, when you restart the spindle or turn on the control box again, otherwise it will cause the

damages of the control box.

Our machine is 220V, when it is power on, please do not open the control box, do not touch the

wiring connectors and not touch the running cutters, please wear the glasses or mask to protect yourself.

1.Software

1. Open the Mach 3 file, double click the “Mach3xxxxx.Exe”to start.

2. Click the “Next”

3. Click the “Yes”

4. Click the “Next”

5. Click the “Next”

6. Click the “Next”

7. Click the “Ok”

8. Click the” Finish”

9.Click the“Ok”

10.Click the“Ok”

After installing the Mach 3, on the desktop, there will occur 3 icon as follows:

Notice: do not open them, please restart your PC at first (if you open the software not restart PC,it

need uninstall fully and reinstall it

After restarting the PC, please double click the “MACH 3 M LL” icon, then you can enter the setup of

the software(you can delete the other two icons)

Open the G code---all the axis should be“0”---then start to engrave, You can choose the “Feed hold” to

pause the working when it has something, if something emergency happens, you can use the” E-stop” or

you can adjust the “Feed rate”.

2. How to control the software:

1. After restarting the PC, choose the MACH 3 M LL icon on the desktop to start the Mach 3.

2. Open the “Config -- select Native Units” menu, then choose the “MM’s”

3. See as below,open”Config--Ports and Pins” to enter the setup.

4. To check whether all the data is same as the follows in the big red circle and then choose OK to

continue.

5. Click “Motor Outputs” to setup the Pin of the stepper motor as follow

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VEVOR Drucker Handbücher

VEVOR

VEVOR S3018 Prover Bedienungsanleitung

VEVOR

VEVOR S1610 Bedienungsanleitung

VEVOR

VEVOR KH-5030 Bedienungsanleitung

VEVOR

VEVOR PD150 Bedienungsanleitung

VEVOR

VEVOR L4040 Bedienungsanleitung

VEVOR

VEVOR S3018 Pro Bedienungsanleitung

VEVOR

VEVOR VG-L5 Bedienungsanleitung

VEVOR

VEVOR S3018 Prover Bedienungsanleitung

VEVOR

VEVOR NS101-M Bedienungsanleitung

VEVOR

VEVOR S3020 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung