VEVOR WS-USR-D Bedienungsanleitung
Technical Support and E-Warranty Certificate
www.vevor.com/support
SMART DIMMER SWITCH
MODEL:WS-USR-D
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:WS-USR-D
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SMART DIMMER SWITCH
INSTRUCTION MANUAL
- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and
electronic devices
FCC compliance information statement：
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: • Increase the
separation between the equipment and receiver. • Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. • Consult the dealer or an experienced radio/ TV technician for
help. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1. This device may not cause
harmful interference. 2. This device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
- 3 -
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement This equipment complies with FCC
RF radiation exposure limits set forth for an uncontrolled environment. This
device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter. “To comply with FCC RF exposure
compliance requirements, this grant is applicable to only Mobile
Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter.” We, Sanven Corporation, has determined that the equipment
shown as above has been shown to comply with the applicable technical
standards, FCC part 15. There is no unauthorized change is made in the
equipment and the equipment is properly maintained and operated.
- 4 -
PRODUCT DESCRIPTION
Thank you very much for choosing this product. Please read all instructions
before use. This information will help you achieve the best results.
This new designed glass panel wireless touch smart switch is designed
with WiFi+RF to replace traditional switches with a variety of ways to
control.Now one new smart feature as new easier pairing method with
Bluetooth supported is added into the Smart Life/Tuya App,together with
the backlight on/off and relay status.And its scratch resistance glass panel
is suitable for different decoration styles with its best value. Note: Button
sound on and off: no button operations before operations begin within 6
seconds.Then press switch button for 4 times and long press for the fourth
time(20s) until the switch beep sounds as Di-Di for 2 times for successful
operation.
SAFETY INFORMATION
Risk of Electric Shock:Electricity can cause personal injury and property
damage if handled improperly.If you are not sure about any part of these
instructions,please seek professional assistance from a qualified
electrician
Technical Parameters:
Model:WS-USR-D
Working voltage: 100-250V AC, 50Hz/60Hz
Max. total current: 2A
Max. Load Power: 220W(110V)
Wireless type: WIFI2.4G+RF433MHz
Working temperature: 0℃~40℃
Support system: Android/iOS
Warnings:
Turn off the power at the circuit breaker and test that power is off before
wiring.
- 5 -
INSTALLATION
Note:
Make sure that the power at the circuit breaker is off before wiring.
Neutral Wire is required.Confirm the wall box contains a Neutral
Wire(typically white).If the wall box don’t have a Neutral Wire,please try
another location at your home or call a professional electrician to install
the switch.
The wire colors indicated in this manual are the usual colors and may
differ in some houses.
Ensure the wire conductors are securely fastened to each wire.
Ensure the Wi-Fi signal is steady and normally working before wiring.
If you don’t have any wiring experience,please call a professional
electrician.
Step 1:
Turn off the circuit breaker and use the electrical tester to test the power.
Ensure the circuit breaker is off before wiring.
- 6 -
Step 2：
Remove the old switch.
Step 3:
Remove the switch and pull it away from the wall. Identify
Line/Load Wire(Note:The color of your wire may be different from
the color shown on the manual.)
Step 4:
Take pictures of the wiring.
- 7 -
Follow the wiring diagram to connect the switch wires to the wires
in the wall box with the wire conductors.
Step 5:
Remove the panel with screwdriver.
Please don’t install with electricity power on.
Step 6:
Prepare to install wiring.
A. Live wire connects “ L ” terminal.
B. Neutral wire connects “ N ” terminal.
1 Gang connects “L1” terminal
1 Gang L1 and N line.
- 8 -
Step 7:
Put the switch into switch box in the wall.
Mount the two side screws.
nstall the glass panel (install from up above).
Finish installation.
ADD DEVICES
1. Download Smart Life App.
Please scan the QR code or download Smart Life on App store.
2. Registration or Log in.
Download “Smart Life”Application.
Enter the Register/Login interface;tap “Register” to create an account
by entering your phone number to get verification code and “Set
password”.Choose “Log in” if you already have a Smart Life account.
Inhaltsverzeichnis
