VIA Technologies AMOS-5000 Bedienungsanleitung
user manual
AMOS-5000
Fan-less, compact embedded
chassis kit for the EITX- 000
R
evision
1
.
00
1
00
-
11
0
3
2009
-
1
551
II
Copyright
Copyright © 2009 VIA Technologies Incorporated. All rights reserved.
No part of this document may e reproduced, transmitted, transcri ed, stored in a
retrieval system, or translated into any language, in any form or y any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respective holders.
PS/2 is a registered trademark of IBM Corporation.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA
Technologies. VIA Technologies makes no warranties, implied or otherwise, in regard to
this document and to the products descri ed in this document. The information provided
in this document is elieved to e accurate and relia le as of the pu lication date of this
document. However, VIA Technologies assumes no responsi ility for the use or misuse of
the information in this document and for any patent infringements that may arise from the
use of this document. The information and product specifications within this document are
su ject to change at any time, without notice and without o ligation to notify any person
of such change.
VIA Technologies, Inc. reserves the right the make changes to the products descri ed in
this manual at any time without prior notice.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has een tested and found to comply with the limits for a class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasona le protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will e
required to correct the interference at his personal expense.
Notice
The changes or modifications not expressly approved y the party responsi le for
compliance could void the user's authority to operate the equipment.
Notice 2
Shielded interface ca les and A.C. power cord, if any, must e used in order to comply
with the emission limits.
Battery Recycling and Disposal
Only use the appropriate attery specified for this product.
Do not re-use, recharge, or reheat an old attery.
Do not attempt to force open the attery.
Do not discard used atteries with regular trash.
Discard used atteries according to local regulations.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
III
Safety Precautions
Do’s
oAlways read the safety instructions carefully.
oKeep this User's Manual for future reference.
oAll cautions and warnings on the equipment should e
noted.
oKeep this equipment away from humidity.
oLay this equipment on a relia le flat surface efore setting
it up.
oMake sure the voltage of the power source and adjust
properly 110/220V efore connecting the equipment to the
power inlet.
oPlace the power cord in such a way that people cannot
step on it.
oAlways unplug the power cord efore inserting any add-on
card or module.
oIf any of the following situations arises, get the equipment
checked y authorized service personnel:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has een exposed to moisture.
oThe equipment has not worked well or you cannot
get it work according to User's Manual.
oThe equipment has dropped and damaged.
oThe equipment has o vious sign of reakage.
Don’ts
oDo not leave this equipment in an environment
unconditioned or in a storage temperature a ove 60°C
(140°F). The equipment may e damaged.
oDo not leave this equipment in direct sunlight.
oNever pour any liquid into the opening. Liquid can cause
damage or electrical shock.
oDo not place anything over the power cord.
oDo not cover the ventilation holes. The openings on the
enclosure protect the equipment from overheating
IV
Box Contents and Ordering Information
Model Number Description
AMOS-5000-1MZZA1 Standard kit
1 x front I/O panel
1 x rear I/O panel
1 x top cover
1 x CF cover
1 x package of ca le ties
1 x audio ca le
1 x GPIO ca le
1 x package of chassis screws
AMOS-5000-1MSZA1 Expanded storage kit
1 x front I/O panel
1 x rear I/O panel
1 x top half of storage chassis
1 x ottom half of storage chassis
1 x CF cover
1 x package of ca le ties
1 x audio ca le
1 x GPIO ca le
1 x package of chassis screws
V
T
ABLE OF
C
ONTENTS
1 Overview ................................................................................................................. 1
Specifications ......................................................................................................... 4
Operating Environment................................................................................... 5
2 Installing the I/O cables .................................................................................. 6
ront I/O plate cables ....................................................................................... 7
Installing the GPIO cable............................................................................ 7
Installing the WLAN antenna .................................................................. 9
Rear I/O plate cables........................................................................................10
Installing the TRS audio cable ................................................................10
Installing the USB I/O cable ....................................................................11
Installing the LPT cable..............................................................................12
3 Installing the standard kit ..............................................................................14
Installing the front I/O plate.........................................................................15
Installing the rear I/O plate...........................................................................17
Installing the top cover ...................................................................................19
Installing the hard drive ............................................................................19
Installing the WLAN module..................................................................20
Installing the top cover..............................................................................21
4 Installing the expanded storage kit ..........................................................23
Installing the front I/O plate.........................................................................24
Installing the rear I/O plate...........................................................................26
Installing the expanded storage kit...........................................................28
Installing the WLAN module..................................................................28
Installing the bottom half of the storage kit....................................29
Installing the hard drives ..........................................................................31
Installing the top half of the storage kit.............................................33
1
1
Overview
2
The AMOS-5000 is a fanless and compact chassis kit that
complements the EITX-3000. The AMOS-5000 comes in two
configurations: standard and expanded storage.
The standard AMOS-5000 configuration consists of front and rear
I/O plates and a top cover. The expanded storage configuration
consists of front and rear I/O plates and a compartmentalized
storage section that can support up to two 2.5” disk drives.
3
The front I/O plate features cutouts for two USB ports, four COM
ports, one GPIO port, one DC-in port, two LED indicators, and one
WLAN antenna.
The rear I/O plate features cutouts for three TRS jacks, one VGA
port, two USB ports, two LVDS ports, one C slot, two LAN ports,
and one LPT port.
4
SPECIFICATIONS
Standard kit Expanded storage kit
Material Heavy duty steel Heavy duty steel
Disk drive capacity 1 2
Front I/O s pport 1 x GPIO
1 x DC-in
2 x USB
4 x COM
1 x antenna
2 x LED
1 x GPIO
1 x DC-in
2 x USB
4 x COM
1 x antenna
2 x LED
Rear I/O s pport 3 x TRS jack
1 x VGA
1 x C
2 x USB
2 x LVDS
2 x LAN
1 x LPT
3 x TRS jack
1 x VGA
1 x C
2 x USB
2 x LVDS
2 x LAN
1 x LPT
WLAN mo nting holes Yes Yes
Weight 0.4 kg 0.75 kg
Dimensions (w x h x d)
(after assembly)
232 x 53 x 126 mm 232 x 73 x 126 mm
5
OPERATING ENVIRONMENT
EITX-3000 with
AMOS-5000
EITX-3000 witho t
AMOS-5000
Operating temperat re With HDD
With HDDWith HDD
With HDD
0°C ~ 45°C
With C
With CWith C
With C
-20°C ~ 55°C
With C
With CWith C
With C
-10°C ~ 65°C
Storage temperat re -20°C ~ 65°C -20°C ~ 65°C
Relative h midity 0% ~ 90% @ 45°C
(non-condensing)
10% ~ 90% @ 45°C
(non-condensing)
Vibration resistance With C
With CWith C
With C
5 Grms
IEC 60068-2-64
random
5 – 500 Hz
1 Oct./min
1 hr/axis
With HDD
With HDDWith HDD
With HDD
1 Grms
IEC 60068-2-64
random
5 – 500 Hz
1 Oct./min
1 hr/axis
With C
With CWith C
With C
5 Grms
IEC 60068-2-64
random
5 – 500 Hz
1 Oct./min
1 hr/axis
Shock resistance With C
With CWith C
With C
50 G
IEC 60068-2-67
half size
11 ms duration
With HDD
With HDDWith HDD
With HDD
20 G
IEC 60068-2-67
half size
11 ms duration
N/A
Inhaltsverzeichnis
Andere VIA Technologies Chassis Handbücher
