VIA Technologies VAB-820 Bedienungsanleitung

1.00-06282016-105400

IMAGE INSTALLATION GUIDE

VAB-820

Linux EVK v3.0.2

CopyrightCopyright

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,

in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written

permission of VIA Technologies, Incorporated.

Trademarks

TrademarksTrademarks

Trademarks

All brands, product names, company names, trademarks and service marks are the property of their respective holders.

Disclaimer

DisclaimerDisclaimer

Disclaimer

VIA Technologies makes no warranties, implied or otherwise, in regard to this document and to the products described in this

document. The information provided in this document is believed to be accurate and reliable as of the publication date of this

document. However, VIA Technologies assumes no responsibility for the use or misuse of the information (including use or

connection of extra device/equipment/add-on card) in this document and for any patent infringements that may arise from the use of

this document. The information and product specifications within this document are subject to change at any time, without notice

and without obligation to notify any person of such change.

VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior notice.

VAB

VABVAB

VAB-

-820 Linux EVK v

820 Linux EVK v820 Linux EVK v

820 Linux EVK v3.0.2 Image Installation Guide

3.0.2 Image Installation Guide3.0.2 Image Installation Guide

3.0.2 Image Installation Guide

iii

Revision History

Version

VersionVersion

Version

Date

DateDate

Date

Remarks

RemarksRemarks

Remarks

1.00 6/16/2016 Initial release

VAB

VABVAB

VAB-

-820 Linux EVK v

820 Linux EVK v820 Linux EVK v

820 Linux EVK v3.0.2 Image Installation Guide

3.0.2 Image Installation Guide3.0.2 Image Installation Guide

3.0.2 Image Installation Guide

Table of Contents

1.1.

1. Introduction

IntroductionIntroduction

Introduction ................................

................................................................

..................................

....

.. 1

1.1.

Package Contents............................................................................................................................ 1

1.2.

Version Information and Supported Features .......................................................................... 2

2.2.

2. Image Development

Image DevelopmentImage Development

Image Development ................................

................................................................

...................................................

......................................

................... 3

2.1.

Booting from a Micro SD Card .................................................................................................... 3

VAB

VABVAB

VAB-

-820 Linux EVK v

820 Linux EVK v820 Linux EVK v

820 Linux EVK v3.0.2 Image Installation Guide

3.0.2 Image Installation Guide3.0.2 Image Installation Guide

3.0.2 Image Installation Guide

1.1.

1. Introduction

IntroductionIntroduction

Introduction

This Image Installation Guide explains how to boot the Linux EVK system image on the

VAB-820 board in order to begin evaluating the platform.

The VAB-820 Linux EVK v3.0.2 is developed based on the NXP fsl-yocto-3.14.28_1.0.0

(Yocto 1.7 Dizzy) and enables the hardware features of the VAB-820 board.

1.1. Package Contents

The via

viavia

via-

-image

imageimage

image-

-gui

guigui

gui-

-imx6qvab820.sdcard

imx6qvab820.sdcardimx6qvab820.sdcard

imx6qvab820.sdcard is the SD card image containing a precompiled

OpenEmbedded file system.

VAB

VABVAB

VAB-

-820 Linux EVK v

820 Linux EVK v820 Linux EVK v

820 Linux EVK v3.0.2 Image Installation Guide

3.0.2 Image Installation Guide3.0.2 Image Installation Guide

3.0.2 Image Installation Guide

1.2. Version Information and Supported Features

•U-Boot version: 2014.04

•Kernel version: 3.14.28

•Evaluation image: OpenEmbedded-core built with Yocto 1.7 Dizzy

•Development based on NXP fsl-yocto-3.14.28_1.0.0 (Yocto 1.7 Dizzy)

•Supports SPI with eMMC or Micro SD boot (default)

•Supports HDMI and LVDS display

•Supports HDMI audio output

•Supports AUO LVDS capacitive touch panels (through USB interface)



AUO 10.4” G104XVN01.0 (1024×768)



AUO 7” G070VW01 V0 (800×480)

•Supports S-video and CVBS

•Supports COM1 DTE mode, COM2 as debug port

•Supports 2 FlexCAN TX/RX

•Supports Gigabit Ethernet

•Supports Line-in, Line-out, Mic-in

•Supports VNT9271 USB Wi-Fi dongle

•Supports EMIO-1541 miniPCIe Wi-Fi module

•Supports EMIO-2550 miniPCIe Mobile Broadband module

•Supports Watchdog, GPIO and RTC

VAB

VABVAB

VAB-

-820 Linux EVK v

820 Linux EVK v820 Linux EVK v

820 Linux EVK v3.0.2 Image Installation Guide

3.0.2 Image Installation Guide3.0.2 Image Installation Guide

3.0.2 Image Installation Guide

2.2.

2. Image Development

Image DevelopmentImage Development

Image Development

This section explains the setup requirements for booting from a Micro SD card.

2.1. Booting from a Micro SD Card

The via

viavia

via-

-image

imageimage

image-

-gui

guigui

gui-

-imx6qvab820.sdcard

imx6qvab820.sdcardimx6qvab820.sdcard

imx6qvab820.sdcard image allows the board to run entirely from the

Micro SD card.

The first step is to copy this image onto a Micro SD card. Insert a card into your Linux host

machine and make sure it is not mounted. Copy the image onto the Micro SD card with the

command below, replacing <device name> with the correct value for the card, for

example “sdb”.

Important:

Important:Important:

Important: Make sure you are writing to the correct device or the host system environment

could be damaged.

$ sudo dd if=via-image-gui-imx6qvab820.sdcard of=/dev/<device name> bs=1M conv=fsync

Next, on the VAB-820, set the J11 boot select jumper to the Micro SD position shown

below.

J11 boot select jumper diagram

J11 boot select jumper diagramJ11 boot select jumper diagram

J11 boot select jumper diagram

Insert the prepared Micro SD card into the VAB-820, connect an HDMI display, and power

on the device to initiate the boot process.

When the boot process is completed, you will see the OpenEmbedded desktop.

1F, 531 Zhong-Zheng Road

Xindian, Taipei, 23148

Taiwan

TEL: 886.2.2218.5452

FAX: 886.2.2218.5453

Email: [email protected]

Taiwan Headquarters

940 Mission Court

Fremont, CA 94539

USA

TEL: 1.510.683.3300

FAX: 1.510.687.4654

Email: [email protected]

USA

Tsinghua Science Park Bldg. 7

No. 1 Zongguancun East Road

Haiden District, Beijing, 100084

China

TEL: 86.10.59852288

FAX: 86.10.59852299

Email: [email protected]

China

3-15-7 Ebisu MT Bldg. 6F

Higashi, Shibuya-ku

Tokyo 150-0011

Japan

TEL: 81.3.5466.1637

FAX: 81.3.5466.1638

Email: [email protected]

Japan

Email: [email protected]

Europe

Andere Handbücher für VAB-820

Inhaltsverzeichnis

Andere VIA Technologies Hauptplatine Handbücher

VIA Technologies

VIA Technologies KM400 Gebrauchsanweisung

VIA Technologies

VIA Technologies A7F129 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-M910 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-PE Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-P820 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA LT-Series Bedienungsanleitung

VIA Technologies

VIA Technologies PT-DVBX Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-P910 Bedienungsanleitung

VIA Technologies

VIA Technologies VT310-DP Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA ME6000 - VIA Motherboard - Mini ITX Bedienungsanleitung

VIA Technologies

VIA Technologies P4X266-PE11-L Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA Mini-ITX Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-CN10000EG - VIA Motherboard - Mini ITX Bedienungsanleitung

VIA Technologies

VIA Technologies VB8001 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-P820 Bedienungsanleitung

VIA Technologies

VIA Technologies VTS-8589 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-M920 Bedienungsanleitung

VIA Technologies

VIA Technologies EX10000EG - VIA EPIA Motherboard Bedienungsanleitung

VIA Technologies

VIA Technologies PT-TVBT Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-M920 Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-M920 Bedienungsanleitung

VIA Technologies

VIA Technologies ARTIGO A2000 - VIA ARTiGO Barebone Storage... Bedienungsanleitung

VIA Technologies

VIA Technologies EPIA-LT Bedienungsanleitung

VIA Technologies

VIA Technologies G03-NC73-F Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung