VIAIR 20007 Bedienungsanleitung
USER MANUAL
IMPORTANT:
It is essential that you and any other operator of this
product read and understand the contents of this
manual before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
*Only Compressor
is CE Certied
200 PSI FAST-FILL
AIR SOURCE KIT
55% Duty Compressor on
2.0 Gallon Air Tank
PART NO. 20007
IMPORTANT SAFETY INSTRUCTIONS:
CAUTION: To reduce risk of electrical shock or electrocution:
- Do not disassemble. Do not attempt repairs or
modications.Refertoqualiedserviceagenciesforall
serviceandrepairs.
- Do not use this product in or area where it can fall or be
pulledintowaterorotherliquids.
- Donotreachforthisproductifithasfallenintoliquid.
- Usethiscompressorwith12-voltDCsystemsonly.
- Thisproductshouldneverbeleftunattendedduringuse.
WARNING:Topreventinjuries:
- Neverallowchildrentooperatethiscompressor.
Closesupervisionisnecessarywhenthiscompressor
is being used near children.
- Thiscompressorwillbecomeveryhotduringand
immediately after use. Do not touch any part of this
compressor with bare hands other than the
ON/OFF switch during and immediately after use.
- Donotusethisproductnearamesorexplosive
materials or where aerosol products are being used.
- Donotoperatethisproductwhereoxygenis
being administered.
- Do not pump anything other than atmospheric air.
- Neverusethisproductwhilesleepyordrowsy.
- Donotuseanytoolsorattachmentswithoutrst
determiningmaximumairpressureforthattool
or attachment.
- Neverpointanyairnozzleorairsprayertoward
another person or any part of the body.
- ThisaircompressorisequippedwithanAutomatic
ResetThermalProtector,andcanautomaticallyrestart
afterthethermalprotectorresets.Alwayscutoffpower
sourcewhenthermalprotectorbecomesactivated.
- Wear safety glasses or goggles when operating this product.
- Useonlyinwellventilatedareas.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
INSTALLATION:
Please read and follow the Installation Instructions
carefully to avoid injury or damage to the compressor
or your vehicle.
Selecting a Mounting Location:
The selection of a proper mounting location for your air
sourcekitwillhelpensurealongandtroublefreeservicelife.
Pleasepay close attention to the following guidelines:
1. Select a FLAT,UPRIGHTANDSECURE location where
the air source kit can be mounted.
2.Tomaximizeaircompressorperformance,locate
compressor as CLOSETOTHEBATTERY as possible so
thatlengthofpositiveleadwirerequiredisataminimum.
3.Choosemountinglocationthatisascoolaspossible
and AWAYFROMHEATSOURCES. The cooler the ambient
temperaturethelesschancethecompressorwilloverheat.
4.Thecompressorismoisture&splashresistant,but
NOTWATERPROOF. Do not mount air source kit in locations
where the unit is likely to come in contact with water.
5. If it is necessary to mount the air compressor further away
fromthebattery,suchasinsideyourvehicleorinthebedof
yourpickup,useaminimum8AWGpositiveleadwire
for remote installation.
6.Donotmountairsourcekitnearareaswhereammable
liquidsarestored.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
MOUNTING AND WIRING:
1.Disconnectgroundcablefromvehicle’sbattery.
2. Temporarily position the air source kit in the location
where it will be mounted.
3.Routegroundwiretothenegativepostofthebatteryorto
an appropriate grounding point and cut ground wire to
length as needed.
4.Mountairsourcekitattanklegmountswiththefour
grommets,andfoursetsofbolts,nuts,washers,
andlockingwashersprovided.Useofthreadsealant
is recommended.
5.Route3/8-inchI.D.airlinefromthe1/2-inchtankport
toa3/8-inchcompressionttingandmakeyourairline
connection.Tightencompressionttingnutsecurely
using a wrench.
6.Connectground(Black)wiretoacleanground,(preferablya
chassisground)andsecurewithaself-tappingscrew.
7.Connectpositive(Red)leadwirefrompre-installed
pressureswitchtoafuseholder(20-ampminimum).
8.Oncethekitisproperlyfusedascloseaspossibleto
thepowersource,connectandtestcompressorsystem
by running the compressor for a short time to build up
pressure in your air tank.
9. Once air pressure reaches preset cut out pressure of
yourpressureswitch(165PSIcut-on,200PSIcut-off),the
compressor will shut off automatically. Inspect all air line
connections for leaks with soap and water solution. If a leak
isdetected,theairlinemaynotbecutsquarelyorpushed
all the way in. Tighten connections if needed.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
OPERATING INSTRUCTIONS:
1. IMPORTANT:AlwaysoperatethecompressorBELOWthe
MAXIMUMPRESSURERATINGofthecompressor.
PleaserefertoApplication&SpecicationsSectionsof
this manual for details.
2.AlwaysobservetheMAXIMUMDUTYCYCLEofthe
aircompressor.RefertoCompressorApplications
andSpecicationsSectionofthismanualfordetails.
Operationexceedingmaximumpressureratingsandor
duty cycle will result in damage to air compressor.
3.YouraircompressorisequippedwithanAUTOMATIC
THERMALOVERLOADPROTECTOR.Thisfeatureis
designedtoprotecttheaircompressorfromoverheating
causing permanent damage to your air compressor.
Thethermaloverloadprotectorwillautomaticallycutoff
power to your air compressor should the internal operating
temperatureoftheaircompressorriseabovesafelevels
duringexcessiveuse.
4.Shouldatanytimeduringuse,youraircompressor
automatically shuts off; do not attempt to restart air
compressor. Turn power switch to the air compressor to
theOFFposition.Theautomaticthermaloverloadprotector
will automatically reset when internal temperature of the
aircompressordropsbelowsafelevels.Afterallowing
aircompressortocooloffforabout30minutes,youcan
safely resume use of the air compressor by turning on
the air compressor.
5.Topreventdischargeofyourvehicle’sbattery,westrongly
recommendthatyoukeepthevehicle’senginerunning
whileusingtheaircompressor.Compressorperformance
isenhancedwhenoperatingcompressorwithvehicle’s
engine running.
6. IMPORTANT:ONLYOPERATETHEAIRCOMPRESSOR
INWELL-VENTILATEDAREAS.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
AIR TANK PRECAUTIONS:
IMPORTANT:
a.Theairsourcekitairtankisratedfor200PSImaximum
workingpressure.Donotoverll.Overllingmayresultin
deathorseriousinjury.
b.Tankisnottobeusedasabreathingdevice.
c.AlwayswearANSIapprovedsafetyglasseswhen
operating air tank.
d.Bleedpressurefromtankaftereachuse,andbefore
servicingoraddingattachments.
DRAIN TANK OFTEN TO REMOVE CONDENSATE.
FAILURE TO DRAIN TANK WILL ALLOW TANK TO
RUST INTERNALLY.
a.Toremoveanyaccumulatedcondensationinsidethetank,
bleedpressurefromtankuntilpressureisapproximately
5PSIto20PSI.
b.Drainwaterfromtankbyopeningthedraincockdrainvalve.
c.Ifdraincockisplugged,releaseallairpressurefromtank,
removedrainvalveandclean,thenreinstall.
d.Aftercondensatehasbeendrained,closethedraincock.
IMPORTANT:ObserveairtankDateofManufacture(stamped
ontankleg).Replaceairtank2to5yearsfromdateairtank
wasrstused,orusethedateofmanufactureasreference.
Youradherencetoairtankdrainingguidelineswilldetermine
thereplacementdateofyourairtank.RUSTEDTANKSCAN
FAILCAUSINGEXPLOSIONSORFATALINJURIES.Discard
tank immediately if tank is rusted.
NOTE: Whenusingasafetypressurereliefvalve,pointthe
safetypressurereliefvalveawayfromyourbody.Usethepull
ringonthesafetyreliefvalve;openthereliefvalvetoventany
pressureinsidethetankbeforeattemptingtoservicetank.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
COMPRESSOR APPLICATION GUIDE:
ABOUT COMPRESSOR DUTY CYCLE:
CompressorDutyCyclereferstoamountoftimeacompressor
canbeoperatedinagiventimeperiod,at100PSI&ata
standard ambient temperature of 72°F.
DutyCycleiscommonlyexpressedas:
CompressorOnTime/(CompressorOnTime+OffTime)
Asanexample,acompressorthatisratedfor20%dutycycle
meansthatcompressorcanbeoperatedat100PSI@72°F
for8Minutesandrestedfor32Minutes.
8min.on/(8min.on+32min.off)=20%DutyCycle
DUTY CYCLE REFERENCE CHART
DUTYCYCLE@100PSI/72°F MINUTESON/OFF
15% 6Min.On/34Min.Off
17% 7Min.On/30Min.Off
20% 8Min.On/32Min.Off
22% 9Min.On/30Min.Off
25% 10Min.On/30Min.Off
30% 13Min.On/30Min.Off
33% 15Min.On/30Min.Off
100% ContinuousDuty
ABOUT RATED WORKING PRESSURE:
Toensuretroublefreeservicelifeofyourcompressor,always
operate compressor within rated working pressure of the
compressor.Neveruseapressureswitchwithahigher
cut-offpressurethancompressor’sratedworkingpressure.
SPECIFICATIONS:
380CAIRCOMPRESSOR
MotorVoltage: 12Volts
Max.CurrentConsumption: 16Amps
RecommendedFuse: 20Amps
MotorType: Perm.Magnetic
HorsePower: 1/4
Max.WorkingPressure: 200PSI
Max.DutyCycle(@72°F&100PSI): 100%
Max.DutyCycle(@72°F&200PSI): 55%
Max.RestartPressure: 200PSI
Max.AmbientTemperature: 158°F
Min.AmbientTemperature: -40°F
Auto.ResetThermalProtection: Yes
Tank pressure drops when
compressor(s)shutoff
1. Loose drain cock
2.Checkvalveleaking
3. Loose connections
1. Tighten drain cock
2.Replacecheckvalveorcompressor(s)
3.Checkallconnectionswithsoapand
water solution and tighten
Compressorrunscontinuouslyand
airowlowerthannormal
1.Excessiveairusage
2. Loose connections
3.Wornpistonringorinletvalve.
4.Cloggedairlterelement
1. Decrease air usage
2.Checkallconnectionswitsoapand
water solution and tighten.
3.Repairorreplacecompressor
4.Replaceairlterelement
Compressorrunscontinuouslycausing
safetyvalve(ifequipped)toopen
1.Badpressureswitch
2.Defectivesafetyvalve
1.Replacepressureswitch
2.Replacesafetyvalve
PROBLEM: POSSIBLECAUSE(S) CORRECTIVEACTION
TROUBLESHOOTING GUIDE:
Excessivemoistureindischarge 1.Excessivewaterinairtank
2.Highhumidity
1.Draintank,tilttanktodrain.
Draintankmorefrequently
2.Movecompressortoareawithlesshumidity,
oruseairlinelter.
Compressorwillnotrun 1.Nopower,orpowerswitch
in OFF position
2.Blownfuse
3.Motoroverheats
4. Faulty pressure switch.
1.MakesurecompressorswitchisON
2.Disconnectcompressorsfrompowersource,
replacefuse.(RefertoSpecicationssectionfor
correctfuseamperage.)
3.Letcompressorscooloffforabout30Minutes
toallowthermaloverloadswitchreset.
4.Replacepressureswitch
Thermaloverloadprotector
cuts out repeatedly
1.Lackofproperventilationor
ambient temperature too high
2.Compressorvalvesfailed
1.Movecompressortowellventilatedarea,
or area with lower ambient temperature
2.Repairorreplacecompressor
Excessiveknockingorrattling 1. Loose mounting bolts
2. Worn bearing on eccentric or
motor shaft
3.Cylinderorpistonringisworn
1. Tighten mounting bolts
2.Repairorreplacecompressor
3.Repairorreplacecompressor
CAUTION: NEVER DISASSEMBLE COMPRESSOR WHILE COMPRESSOR IS PRESSURIZED.
200 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL
LIMITED WARRANTY:
VIAIRCorporationwarrantsthisproduct,whenproperly
installedandundernormalconditionsofuse,tobefreefrom
defects in workmanship and materials for a period of one year
fromitsoriginaldateofpurchase.Toreceivewarrantyservice
orrepair,pleasecontactVIAIRCorporation.
Returnsshouldbemadewithinoneyearofthedateof
purchase,afteraReturnGoodsAuthorization(RGA)number
hasbeenassignedbyVIAIRCorporation.ToobtainRGA,
faxacopyofyourreceiptto(949)585-0188.Forcomplete
warrantydetails,pleasevisit:www.viaircorp.com/warranty
PLEASE NOTE:
THISWARRANTYCOVERSPRODUCTDEFECTSONLY;
ITDOESNOTCOVERINCIDENTALORCONSEQUENTIAL
DAMAGESASRESULTOFMISUSEORABUSE.
15EDELMAN•IRVINE,CA92618
TEL:(949)585-0011•FAX:(949)585-0188
www.viaircorp.com
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere VIAIR Luftkompressor Handbücher
VIAIR
VIAIR EXTREME Series Bedienungsanleitung
VIAIR
VIAIR SPORT COMPACT Series Bedienungsanleitung
VIAIR
VIAIR 44043-440P Bedienungsanleitung
VIAIR
VIAIR 00093-90P Bedienungsanleitung
VIAIR
VIAIR 400H Bedienungsanleitung
VIAIR
VIAIR 00071 Bedienungsanleitung
VIAIR
VIAIR 485C Bedienungsanleitung
VIAIR
VIAIR 20008 Bedienungsanleitung
VIAIR
VIAIR Exreme Series Bedienungsanleitung
VIAIR
VIAIR 380C Bedienungsanleitung
VIAIR
VIAIR 28021 Bedienungsanleitung
VIAIR
VIAIR 250C-IG Bedienungsanleitung
VIAIR
VIAIR 70P Bedienungsanleitung
VIAIR
VIAIR 10005 Bedienungsanleitung
VIAIR
VIAIR 450P-A Bedienungsanleitung
VIAIR
VIAIR 85 Bedienungsanleitung
VIAIR
VIAIR 10008 Bedienungsanleitung
VIAIR
VIAIR HEAVYWEIGHT Series Bedienungsanleitung
VIAIR
VIAIR 20075 Bedienungsanleitung
VIAIR
VIAIR 450P-RVS Bedienungsanleitung
