Vicon VCR30RT Bedienungsanleitung
Installation &
Operation Manual
XX105
MODEL VCR30RT
TIME-LAPSE VIDEO CASSETTE RECORDER
Copyright © 2003 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: +44 (0) 1489 566300 INFOFAX: 800-287-1207 WEB: www.vicon-cctv.com
Vicon part number 8009-8105-00-01 Rev 703 Section 8
Dear Valued Customer:
Thank you for selecting Vicon systems and
products for your video needs.
Since Vicon’s beginning in 1 67, out only
business has been the design, engineering, and
production of the highest quality video systems
and equipment for use in a wide variety of
security, safety, control, surveillance, and
communication applications.
We stand behind the quality and dependability
of every product with an industry leading
Beneficial Use warranty.
If you are not satisfied with a Vicon product or
service, I would like to know. Your complete
satisfaction is the mission of every Vicon
employee.
Sincerely,
Kenneth M. Darby
President
2
INTRODUCTION
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
If you pour a cold liquid into a glass, water vapor
in the air will condense on the surface of the glass.
This is moisture condensation. Moisture conden-
sation on the head drum, one of the most crucial
parts of the unit, will cause damage to the tape.
When the VCR is exposed to a rapid temperature
change from cold to warm, some condensation
will occur. Under this condition, connect the power
cord to the AC line, press POWER button on and
allow at least two hours for the VCR to dry out.
MOISTURE CONDENSATION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION : TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK);
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The serial number is found on the back of this
unit. This number is unique to this unit and not
available to others. You should record requested
information here and retain this guide as a per-
manent record of your purchase.
Model No.
Serial No.
CAUTION : TO PREVENT ELECTRIC SHOCK,
DO NOT USE THIS PLUG WITH AN EXTEN-
SION CORD, RECEPTACLE OR OTHER OUT-
LET UNLESS THE PLUG CAN BE FULLY
INSERTED WITHOUT EXPOSING ANY PARTS
OF THE BLADES.
This lightning flash with arrowhead sym-
bol within an equilateral triangle is intend-
ed to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilater-
al triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product.
WARNING: Do not install this equipment in a con-
fined space such as a bookcase or similar unit.
CAUTION: The apparatus should not be exposed
to water (dripping or splashing) and no objects
filled with liquids, such as vases, should be placed
on the apparatus.
IMPORTANT COPYRIGHT INFORMATION: Many
television programs and films are copyrighted. In
certain circumstances, copyright law may apply to
private in-home video taping of copyrighted materi-
als.
Warning : This is a class A product . In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
3
CONTENTSFEATURES
INTRODUCTION
Features/Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PREPARATION
Control Names and Locations . . . . . . . . . . . . . . . . .4-6
Installation &
VCR to Monitor and CCD Camera Connection . . . . . .7
Multiplexer/Matrix Switcher Connections . . . . . . . . . .8-9
Alarm Record Connection . . . . . . . . . . . . . . . . . . . . .10
Series Record Connection . . . . . . . . . . . . . . . . . . . . .10
Setting the On Screen Display . . . . . . . . . . . . . . . . . .11
Setting the Setup Menu . . . . . . . . . . . . . . . . . . . . . . .12
Setting the Set Time . . . . . . . . . . . . . . . . . . . . . . . . .13
Video Cassette Tapes . . . . . . . . . . . . . . . . . . . . . . . .14
PLAYBACK
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Special Effects Playback . . . . . . . . . . . . . . . . . . .16-17
Tape Counter Memory Feature . . . . . . . . . . . . . . . . .18
RECORDING
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Repeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Series Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Alarm Recording . . . . . . . . . . . . . . . . . . . . . . . . .23-24
ADDITIONAL INFORMATION
Check the Alarm Record Information . . . . . . . . . . . . .25
Recording Time Table Information . . . . . . . . . . . . . . .25
Check the Power Fail Recall . . . . . . . . . . . . . . . . . . .26
Use to Lock On/Off Switch . . . . . . . . . . . . . . . . . . . .26
Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Service Guide Table . . . . . . . . . . . . . . . . . . . . . . . . .28
VIDEO Head Cleaning . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
RS-232C Protocol . . . . . . . . . . . . . . . . . . . . . . . .31-44
• Time Lapse VCR Function
• Trigger Function
• Buzzer Function
• Auto Switcher Functionality
• Tape Compatibility
• Elapsed Time Display
• Series Recording Function
• Alarm Recording Function
Warning : The battery used in this device may present a fire or chemical burn hazard if mis-
treated. Do not recharge, disassemble, incinerate, or heat above 212°F (100°C). Replace the
battery with Matsushita Elec. Ind., Co., Ltd. (Panasonic) part no. VL2330 only. Use of another
battery may present a risk of fire or explosion. Dispose of used batteries. Keep away from
children. Do not disassemble or dispose of in fire.
INTRODUCTION
1. TIME/CNT/REM BUTTON
To switch among the clock, tape counter
and tape remaining time.
2. POWER BUTTON
To turn the VCR on and off.
3. TIMER BUTTON
To set timer recording.
4. REC/PLAY HOURS BUTTON
To change the Play or Record speed to a
lower or higher value.
5. V-POS BUTTON
To move the position of the Time/Date
display in the vertical direction.
6. H-POS BUTTON
To move the position of the Time/Date
display in the horizontal direction.
7. MENU BUTTON
Displays the programming menu on the
Monitor or TV screen.
8. CURSOR (UP/DOWN) BUTTONS
To select the item on the menu.
9. CASSETTE COMPARTMENT
Where the video cassette is inserted.
10. STOP BUTTON
To stop the tape.
11. PLAY/REC CHECK BUTTON
To playback a recorded tape and used for
the Record Check function.
12. P/STILL(PAUSE STILL) BUTTON
To enter a field advance picture during
still playback or to pause video; in con-
junction with Jog Dial.
13. SHUTTLE RING
To fast forward or rewind the tape.
14. JOG DIAL
Rotate to advance or reverse advance
video picture while viewing a still
picture.
15. RECORD BUTTON
To record Video.
16. EJECT BUTTON
To eject a stopped cassette.
17. VCR FUNCTION INDICATOR PANEL
Details are on page 6.
18. ENTER BUTTON
To select items on the menu screen.
19. SHARPNESS CONTROL
To adjust the playback quality.
20. TRACKING (EE/DD) BUTTON
To adjust the manual tracking.
21. LOCK ON/OFF SWITCH
To switch lock and unlock.
22. COUNTER CLEAR BUTTON
To set the counter to zero or erase the
information on the menu screen.
23. ALARM INDEX
To active and deactivate (toggle) the
alarm index function.
FRONT
SHARPNESS
HARD
POWER
TIME/CNT/REM
ALARM/INDEX
COUNTER
CLEAR
TIMER
V-POS
REC/PLAY HOURS
CURSOR
TRACKING
H-POS
MENU
ENTER
SOFT
LOCK
ON OFF
1 2 3 4 5 6 7 8 9 10 11 12 13
23 22 21 20 19 18 17 16 15 14
4
PREPARATION
CONTROL NAMES AND LOCATIONS
5
PREPARATION
CONTROL NAMES AND LOCATIONS (cont’d)
1. POWER CORD
Connect only to an AC 100-240V, 50/60Hz
outlet.
2. RS-232C CONNECTOR
Connect a personal computer for
controlling the VCR.
3. MONITOR OUT JACK
Connect to another monitor.
4. AUDIO IN/OUT JACK
Connect the audio input and output
terminal.
5. VIDEO IN/OUT JACK
Connect the video input and output
terminal.
6. RESET BUTTON
Use this button to reset the VCR.
7. 12-PIN TERMINAL BLOCK
Connect external signals.
VIDEO IN
AUDIO IN
MONITOR OUT
AUDIO OUT
VIDEO OUT
1 2 3 4 56 7 8 9 10 11 12
RS-232C
RESET
1
ALARM IN
2
ALARM OUT
3
ALARM RESET
4
GND
5
SERIES IN
6
SERIES OUT
7
WARNING OUT
8
TRIGGER OUT
9
GND
10
LOW TAPE OUT
11
1 SHOT REC IN
12
GND
REAR 1 2 3 45
67
TERMINAL SIGNAL LEVEL IN/OUT
1. ALARM IN INPUT
2. ALARM OUT OUTPUT
3. ALARM RESET INPUT
5. SERIES IN INPUT
6. SERIES OUT OUTPUT
7. WARNING OUT OUTPUT
8. TRIGGER OUT OUTPUT
10. LOW TAPE OUT OUTPUT
11. 1-SHOT REC IN INPUT
4, 9, 12. GND COMMON
VIH VIL
T
V
OH VOL
T
VIH VIL
T
VIH VIL
T
VOH VOL
T
VOH VOL
T
VOH VOL
T
VOH VOL
T
VIH VIL
T
Terminal Signal Levels
VIH: 4~5V, VIL: 0~0.6V
T: above 250msec
VOH: 4~5V, VOL: 0~0.6V
T: ALARM REC STATE
VIH: 4~5V, VIL: 0~0.6V
T: above 250msec
VIH: 4~5V, VIL: 0~0.6V
T: above 250msec
VOH: 4~5V, VOL: 0~0.6V
T: above 250msec
VOH: 4~5V, VOL: 0~0.6V
T: until any key is pressed
VOH: 4~5V, VOL: 0~0.6V
T: above 8~10msec
VOH: 4~5V, VOL: 0~0.6V
T: below 5 min, end of tape
VIH: 4~5V, VIL: 0~0.6V
T: above 250msec
0V
–
6
PREPARATION
ALARM
H
SERIES TIMER
INDEX
P.FAIL
K.LOCK
REPEAT
REC
INDICATOR PANEL
1. TIME LAPSE VCR TIME Indication
2. ALARM Indication
(ALARM REC ON indication)
3. SERIES Indication
4. RECORD Indication
5. TIMER Indication
6. CASSETTE Indication
7. INDEX Indication
8. POWER FAILURE Indication
9. KEY LOCK indication
10. REPEAT Indication
11. FUNCTION Indication
(CLOCK, TAPE COUNTER, ERROR)
12. VCR FUNCTION Indication
VCR FUNCTION Indication
PLAYBACK INDICATION RECORDING INDICATION
PLAYBACK
PAUSE STILL
FAST FORWARD
REWIND
FORWARD SEARCH
REVERSE SEARCH
RECORDING
TIMER RECORDING
ALARM INDEX
ALARM RECORDING
SERIES RECORDING
FORWARD SLOW PICTURE/
FORWARD FIELD ADVANCE
REVERSE SLOW PICTURE/
REVERSE FIELD ADVANCE
CONTROL NAMES AND LOCATIONS (cont’d)
1234567
12 11 10 9 8
7
PREPARATION
INSTALLATION
VCR TO MONITOR AND CCD CAMERA CONNECTION
•
Connect your VCR’s AUDIO/VIDEO output jacks to the A/V input jacks on back of your
monitor.
If your monitor does not have A/V input jacks, exchange the monitor or TV for one with A/V
input jacks.
•Connect the CCD camera to VCR’s VIDEO input jack.
NOTE: The MONITOR OUT BNC port does not support video when power is OFF (unplugged)
to the VCR.
•The cables for audio and video connection are not provided with your VCR.
•“RS-232C”is an interface standard for data terminals and data communications equipment
employing serial binary data exchange as stipulated under the RS-232 standard. Using the
RS-232C interface, this VCR can be controlled by a personal computer.
RS-232C communication
is possible when the
optional RS-232C
interface adapter is
connected to a PC.
8
PREPARATION
MULTIPLEXER CONNECTIONS
HOW TO CONNECT MULTIPLEXER WITH TRIGGER INPUT TERMINAL
If the multiplexer has two output terminals (MONITOR OUT, PB OUT), connect monitor to the PB
OUT terminal if you want to see the playback picture.
To use the multiplexer and trigger function properly, refer to the multiplexer instruction manual.
Andere Handbücher für VCR30RT
1
Inhaltsverzeichnis
Andere Vicon Videorecorder-System Handbücher
Vicon
Vicon VCR406 Bedienungsanleitung
Vicon
Vicon VCR420S Bedienungsanleitung
Vicon
Vicon VCR596 Bedienungsanleitung
Vicon
Vicon VCR480TL Bedienungsanleitung
Vicon
Vicon VCR405 Bedienungsanleitung
Vicon
Vicon VCR424-2 Bedienungsanleitung
Vicon
Vicon VCR496-P Bedienungsanleitung
Vicon
Vicon VCR410S Betriebsanleitung
Vicon
Vicon VCR480TL Bedienungsanleitung
Vicon
Vicon VCR401 Bedienungsanleitung
