Victory VPT- 46-NS Bedienungsanleitung

Manual Part No.: 50842804

Rev: 00

Print Date: 07/20/04

Installation, Operation & Troubleshooting Instructions

110 Woodcrest Road, Cherry Hill, NJ 08003

Phone: (856) 428- 4200 Fax: (856) 428-7299 Website: www.victory-refrig.com

E-Mail: part[email protected] ● [email protected] ●[email protected]

For Models: VPT- 46-NS, VPT-65-NS, VPT- 88-NS, VPT-119-NS

Pizza Table Refrigerator

RReeffrriiggeerraattiioonnaattiittssbbeesstt

PART OF AGA FOODSERVICE GROUP

Thank you for purchasing a Victory Refrigeration Pizza Table Refrigerator! This unit has

passed our strict Quality Control Inspection and meets the high standards set by

Victory Refrigeration. You have made a quality investment that with proper

maintenance will give you years of service.

Please read the following installation and maintenance instructions before installing or

using your unit. If you have any questions, please call our Customer Service

Department at (856) 428-4200.

IMPORTANT INFORMATION - PLEASE READ

●●

Please read these instructions carefully before installing or using. If recommended

procedures are not followed, warranty claims will be denied.

●●

Your Warranty Registration information is located on the next page of this manual. Please

complete the card and submit it to Victory Refrigeration within 10 days of installation.

Failure to properly register equipment can void the warranty.

●●

Victory Refrigeration reserves the right to change specifications and product design

without notice. Such revisions do not entitle the buyer to corresponding

changes, improvements, additions or replacements for previously purchased equipment.

●●

A detailed Owners Manual with a troubleshooting guide, parts lists and additional

information can be ordered from the factory or may be downloaded free from the website at

www.victory-refrig.com.

THANK YOU

Warranty

(Continental USA Only)

The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and

workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or

repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and

material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one

year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided

terms of payment have been fully met. All labor shall be performed during regular working hours. Overtime premium

charges will be at Buyer's expense.

Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly

installed, started-up and inspected by the dealer or authorized Victory Service agent.

Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty

obligations or any other obligations, expressed or implied.

This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal

maintenance items outlined in Owner's Manual, adjustment of door mechanisms or replacement of light bulbs, fuses

or batteries.

Any repairs or replacement of defective parts shall be performed by Seller's authorized service personnel. Seller shall

not be responsible for any costs incurred if the work is performed by other than Seller's authorized service personnel.

Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and

installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim,

together with full details of the service problems, diagnosis and work performed. Victory reserves sole discretion

whether further documentation on a claim is to be submitted.

Seller shall not be liable for consequential damages of any kind which occur during the course of installation of

equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied

hereunder, and Buyer's sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise

shall be for the repair or replacement of the equipment or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the

equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee

the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder

and Seller shall not be liable for any prospective or lost product or profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED

WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY

OR OF FITNESS FOR A PARTICULAR PURPOSE.

The foregoing shall be Seller's sole and exclusive obligation and Buyer's sole and exclusive remedy for any action,

whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price

of the item.

ORIGINAL DATE OF INSTALLATION __________________________________________________________________

INSTALLATION COMPANY NAME ____________________________________________________________________

STREET_______________________________ CITY _____________________ STATE ______ ZIP CODE___________

DISTRIBUTOR’S NAME_____________________________________________________________________________

STREET_______________________________ CITY _____________________ STATE ______ ZIP CODE___________

You may register online at www.victory-refrig.com, fax this completed page to (856) 428-7299, or copy and mail form below to Victory.

*NOTE: The following mail-in form or online registration must be filled out and forwarded to Victory by the installer or customer within 10 days

after start-up. Failure to do this will invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD

CHERRY HILL, NJ 08003-3648

TEL: (856) 428-4200 ●FAX: (856) 428-7299

Cabinet Model No.______________________

Cabinet Serial No._________________

(Data plate information located inside cooler on

the upper left wall)

WARRANTIES NOT VALID UNLESS REGISTERED AT

FACTORY WITHIN 10 DAYS AFTER START-UP DATE.

Proper installation is the first step to operation. We recommend that your Pizza Table Refrigerator be installed

by an authorized Victory Certified Installer.

Receiving Shipment

All units are performance tested and thoroughly inspected prior to shipment. Upon leaving the factory, all units are in

perfect condition. Upon receipt, examine the exterior of the shipment packaging for any signs of rough handling. If the

cabinet is damaged, it should be noted on the delivery slip or bill of lading and signed. A claim must be filed immediately

against the carrier indicating the extent and estimated cost of damage incurred.

Uncrating

Refer to “VPT Uncrating & Caster Installation Instructions”

Locating Your New Pizza Table Refrigerator

Consider the following when selecting a location cabinet:

1. Clearance - (a) Pizza Table Refrigerators are spaced 2” (inches) off the wall by the drain line cover. There are no

spacing requirements for the sides of the unit. (b) Pizza Table lids must have at least 1” (inch) clearance when fully

opened to avoid any damage when or if the unit is under any type of covering.

2. Floor Load - The floor on which the cabinet will rest must be free of vibration and suitably strong enough to support

the combined weights of the cabinet plus the maximum product load.

3. Ventilation - The air cooled, self-contained refrigeration system requires a sufficient amount of cool, clean air. Avoid

placing the refrigerator cabinet near heat generating equipment such as ovens, ranges, heaters, fryers, steam kettles,

etc., and out of direct sunlight. Avoid locating the self-contained refrigerator cabinet in an unheated room, or where

the room temperature may be below 65°F.

4. Ambient Temperature - Pizza Table Refrigerators are approved for operation under NSF-7 standard which is for

operation in +86°F room temperature.

Installing Casters

Refer to “VPT Uncrating & Caster Installation Instructions”

Leveling

Refer to “VPT Uncrating & Caster Installation Instructions”

Cabinet Cleaning

Prior to placing your new Pizza Table Refrigerator and all shelves, pan dividers and food storage pans into operation, it is

advisable that the interior be washed thoroughly with a mild detergent and water solution. Rinse with clear water and a

sanitizing solution. Allow cabinet to air dry.

Installing Shelves

All cabinets with shelves are supplied with pilasters and shelf clip supports. Shelves are easily installed by inserting the

shelf support clips into the pilasters so they fit tightly. Align the shelf so the smaller fill wires run from front to rear and rest

the shelf on the clips.

Electric Supply

Wiring should be done by a qualified electrician in accordance with local electrical codes. Aseparate ground wire must

be supplied for all installations. A properly wired refrigerator will assure proper operation. Electrical supply requirements

are on the cabinet serial/data plate located on the upper left interior tank wall inside the cabinet. It is recommended that a

direct, properly protected line of the proper size wire be installed from the main supply to your refrigerator. To assure

that the correct voltage is being supplied, while the refrigerator is in operation take a voltage reading at the motor-

compressor electrical connections, or as close to the motor-compressor as possible.

All refrigerator electrical systems are internally grounded.

Power Cord & Switch

The power cord for the Pizza Table Refrigerator is shipped inside the refrigeration compartment.

1. Remove the rear refrigeration cover. (See Figure 1)

2. Remove the two 1/4” hex head shipping bolts at the rear of the condensing unit base. With these shipping

bolts removed, the condensing unit is serviceable from the front of the Pizza Table Refrigerator. (See Figure 2)

3. Feed the power cord plug thru the round opening and reinstall the rear refrigeration cover to provide power to the

Pizza Table Refrigerator. 1

INSTALLATION INSTRUCTIONS

4. Remove the front refrigeration cover. A power switch is located in the front upper left corner of the refrigeration

compartment.

5. Move the power switch to the “ON” position.

*Note: The power switch located in the front of the refrigeration compartment must be in the “ON” position for the Pizza

Table Refrigerator to operate.

Figure 1 Figure 2

Temperature Controls

Temperature Controls for the pizza table refrigerator storage and pan rail areas are set at the factory to maintain NSF

Standard 7 holding temperature. The temperature controls are located behind the front grill and should only be adjusted

by a qualified technician.

Refrigerated Pan Rail & Night Switch

The refrigerated pan rail is a “Food Holding” area only and is not approved for

storage of food. It is recommended that at the close of each work day, the food in

the pan rail be removed and stored in a refrigerator.

A night switch has been provided to turn off the pan rail when not in use and is

located on the front grill. This will help save energy and make cleaning easy.

The pan rail is “ON” when the night switch inside the refrigerated pan rail label

displays a green light. “OFF” position is indicated when the night switch is not

displaying a green light. See “Refrigerated Pan Rail Label”.

Installing Replacement Door Gasket (if required)

Removing

Beginning at one corner, pry gasket loose from the retaining strip. Peel remainder of gasket from the door and discard.

Replacing

Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the gasket in warm water to

make it more pliable.) Align new gasket frame on the door retainer strip. Starting at one corner, press each corner of

the gasket into the retainer strip. Once started, the gasket can be easily inserted around the entire perimeter of the door

by simply press rolling into place.

Installation Checklist

After the cabinet has been installed, leveled and cleaned as described, refer to the following checklist prior to start-up.

Check for proper electrical hook-up.

Check exposed refrigeration line connections for leaks. Make sure refrigeration lines are not dented, kinked or rubbing.

Check condenser fan for freedom to rotate without striking any stationary members.

Check that cabinet is level.

Check to see if back of cabinet has the required 2” (inch) minimum clearance from the wall or any flat surface.

Product Load

After the Pizza Table Refrigerator has been started and reaches the proper storage temperatures, food may be loaded.

For optimum energy efficiency, we recommend allowing a 1-1/2” clearance between the interior cabinet wall and product

load.

“Refrigerated Pan Rail Label”

Cabinet Cleaning

Victory Refrigeration recommends periodic internal and exterior cleaning as outlined below.

Daily Exterior Cleaning

1. Clean surface with a sponge and cleaning solution. Use a non-abrasive cleaner that does not contain chlorine.

2. Polish with a soft cloth, wiping with the grain of the metal.

3. Once a week wipe with a film cutting agent to maintain shine.

Weekly Interior Cleaning

1. Remove all food, food related items and shelves.

2. Discontinue power to refrigeration system by turning temperature control switch (or dial knob) all the way to the

right.

3. Remove loose food particles from interior floors, walls and ceiling.

4. Scrub all interior surfaces with warm detergent solution 100°F - 120°F (38°C - 39°C) and a nylon bristled brush.

5. Rinse with clear water and allow to air dry.

6. Reinstall shelves.

7. Restore power to refrigeration system by turning temperature control switch (or dial knob) to the right.

8. Return food to cabinet when temperature indicator reaches safety zone.

Condenser Maintenance

To keep your cabinet running efficiently, it is recommended that you clean the condenser once every three months.

However, once a month is recommended if the unit is located near cooking equipment which produces grease laden

vapors, i.e. fryers, grills, steam kettles, etc.

The refrigeration condensing unit is accessible from the front of the Pizza Table Refrigerator. (See Figure 3)

Caution: At installation two shipping screws must be removed from the rear of the condensing unit to allow service from

the front of the unit. (Refer to Figure 2)

1. Remove the front refrigeration cover (grill), by removing all screws. Be careful of the Night Switch when removing.

2. Remove power from the Pizza Table Refrigerator by moving the power switch to the “OFF” position.

3. Remove the air baffle located above the condenser.

4. Remove the two screws at the front of the condensing units base.

5. Slide the condensing unit forward to clean.

Caution: The suction line coil will expand to allow the unit to slide forward. Observe the suction line coil as the unit slides

forward to ensure no interference is encountered.

6. Reverse the steps for installation and restart of the Pizza Table.

Figure 3

WARNING: Failure to keep condenser clean may cause premature failure of motor-compressor which will NOT

be covered by warranty.

Lubrication

Unless otherwise specified, all Victory refrigerators are equipped with oilless type motors. The motor-compressor is a

sealed unit and is constantly lubricated when in operation. The condenser and the evaporator motors are equipped with

lifetime oiled bearings which never need to be oiled.

PERIODIC MAINTENANCE

BEFORE CALLING SERVICE GUIDE FOR COMMON PROBLEMS

Caution: Disconnect Power Supply Prior to Attempting Any Service!

VPT Pizza Tables

Part No. Description VPT- 46 VPT- 65 VPT- 88 VPT-119

Refrigeration Components

10797224 Condenser Unit w/ Fan Assembly, RH or LH (Complete) X

10797215 Condenser Unit w/ Fan Assembly, RH or LH (Complete) X

10797232 Condenser Unit w/ Fan Assembly, RH (Complete) X

10797226 Condenser Unit w/ Fan Assembly, LH (Complete) X

10797221 Condenser Unit w/ Fan Assembly, RH (Complete) X

10797211 Condenser Unit w/ Fan Assembly, LH (Complete) X

50855901 Compressor, 1/4 H.P. R134a X

50762901 Compressor, 1/3+ H.P. R134a X

50848201 Compressor, 1/3 H.P. R134a X

50831201 Compressor, 1/2+ H.P. R134a X

50686503 Filter Drier, 1/4” ODF X X X X

50878402 Expansion Valve X X X X

50757404 Coil, Condenser X X X

50829801 Coil, Condenser X

50193101 Fan Motor, Condenser X X X X

50618602 Blade, Condenser Fan X X X X

04458311 Bracket, Condenser Fan Motor X X X

04458301 Bracket, Condenser Fan Motor X

04458212 Fan Cover, Condenser X X X

04458201 Fan Cover, Condenser X

04458411 Top Fan Cover, Condenser X X X

04458401 Top Fan Cover, Condenser X

10796919 Coil Assembly, Evaporator R134a (RH or LH) X

10796904 Coil Assembly, Evaporator R134a (RH) X X

10796916 Coil Assembly, Evaporator R134a (LH) X X

10796921 Coil Assembly, Evaporator R134a (RH) X

10796905 Coil Assembly, Evaporator R134a (LH) X

50597502 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 13”) X

50597503 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 17”) X X

50597602 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 25”) X

10797304 Fan Panel Assembly, Evaporator X

10797303 Fan Panel Assembly, Evaporator X

10797302 Fan Panel Assembly, Evaporator X

10797301 Fan Panel Assembly, Evaporator X

04420301 Fan Panel (without fan, includes 1 cut-out for fan) X

04458803 Fan Panel (without fan, includes 1 cut-out for fan) X

04458802 Fan Panel (without fan, includes 2 cut-outs for fans) X

04458801 Fan Panel (without fan, includes 2 cut-outs for fans) X

04422101 Fan Panel End, Left X X X

04422103 Fan Panel End, Right X X X

04422109 Fan Panel End, Left X

04422110 Fan Panel End, Right X

50639801 Fan Motor, Evaporator X X X X

50598001 Fan Blade, Evaporator X X

50830503 Fan Blade, Evaporator X X

50842201 Fan Guard, Plastic X X X X

04415201 Bracket, Evaporator Fan Motor X X X X

REPLACEMENT PARTS

VPT Pizza Tables

Part No. Description VPT- 46 VPT- 65 VPT- 88 VPT-119

Refrigeration Components (cont’d)

04461601 Condensate Drain Pan X X X

04447401 Condensate Drain Pan X

50313101 Temperature Control, Ranco (Model# 016-111) X X X X

50686801 Solenoid Valve, 1/4 with Coil (MN# MKC120V) X X X X

50694702 Pressure Control, Low (MN# 085CP1A-1K) X X X X

50569502 Thermometer, Hanging Stem X X X X

Electrical Components

50518901 Heater Wire, Half Door Mullion X X X X

50828201 Cord & Plug Assembly (115V/60Hz/, 15 Amps) X X X X

50584001 Switch, Toggle X X X X

50619602 Switch, Rocker Green Light X X X X

Door and Components

10818401 Door Assembly, Left Hinged X X X X

10818501 Door Assembly, Right Hinged X X X

50829502 Gasket, Half Door X X X X

50827602 Gasket Retainer Strip, Side X X X X

50827701 Gasket Retainer Strip, Top or Bottom X X X X

50827902 Door Pan (or Liner), Flat X X X X

Hardware

10685101 Hinge Assembly, Complete X X X X

50520102 Hinge Barrel X X X X

50520103 Hinge Base X X X X

50520104 Hinge Shim X X X X

50520105 Hinge Cover X X X X

50520106 Hinge Cam X X X X

50678801 Hinge Barrel Base Screws X X X X

05312701 Hinge Barrel Shim X X X X

50648301 Caster, 3-1/2” (with Brake) X X X X

50648302 Caster, 3-1/2” (without Brake) X X X X

Shelves

50597806 Shelf, Epoxy Coated Narrow End X X X X

50597906 Shelf, Epoxy Coated Narrow Center X X

50022501 Clips, Shelf X X X X

03244201 Strip, Pilaster X

03254101 Pilaster & Mullion X

03254102 Pilaster & Mullion X X

VPT Pizza Tables

Part No. Description VPT- 46 VPT- 65 VPT- 88 VPT-119

Cabinet, Miscellaneous

50883201 Victory “Refrigerator” Logo X X X X

50830404 Cutting Board, Standard (Dimensions: 18” x 119”) X

50830405 Cutting Board, Standard (Dimensions: 18” x 88”) X

50830406 Cutting Board, Standard (Dimensions: 18” x 65”) X

50830407 Cutting Board, Standard (Dimensions: 18” x 46”) X

50839501 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 119”) X

50839502 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 88”) X

50839503 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 65”) X

50839504 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 46”) X

01379601 Bracket, Retainer X X X X

50755502 Rubber Boot, Garnish Rack X X X X

50755503 Rack, 2.25” Garnish X X X X

05314201 Lid, Pan Rail (2 Per VPT-119) X

05314214 Lid, Pan Rail (2 Per VPT-88; 1 Per VPT-46) X X

05314216 Lid, Pan Rail (1 Per VPT-65) X

50632001 Handle, Lid with Screws X X X X

50767001 Kit, Lid Bracket with Pins X X X X

01372801 Pan Support, Rail X

01372802 Pan Support, Rail X X

01372813 Pan Support, Rail X

09351301 Divider, Pan X X X X

04457801 Grill, Rear (covers back of right side refrig. system) X

04457811 Grill, Rear (covers back of right side refrig. system) X X X

04457812 Grill, Rear (covers back of left side refrig. system) X X X

04463101 Grill, Front w/ Flour Filter (covers front of refrig. system) X X X

04463102 Grill, Front w/o Flour Filter (covers front of refrig. system) X X X

04470201 Grill, Front w/o Flour Filter (covers front of refrig. system) X

04470203 Grill, Front w/ Flour Filter (covers front of refrig. system) X

10803101 Grill Assembly, Flour Filter (complete) X

10803104 Grill Assembly, Flour Filter (complete) X X X

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Victory Kühlschrank Handbücher

Victory

Victory VPT-119 Bedienungsanleitung

Victory

Victory URS-1-S7 Bedienungsanleitung

Victory

Victory GFS- 3D- S7 Bedienungsanleitung

Victory

Victory ACRS-1D-S1-HC Bedienungsanleitung

Victory

Victory VWR27HC Bedienungsanleitung

Victory

Victory ACRS-ID-S-STS Bedienungsanleitung

Victory

Victory RS-1D-S7-EW Bedienungsanleitung

Victory

Victory GRS-1-S7 Bedienungsanleitung

Victory

Victory RFS-1D-S7-EW Bedienungsanleitung

Victory

Victory URS-1-S7 Bedienungsanleitung

Victory

Victory LSR23HC Bedienungsanleitung

Victory

Victory VPT-65 Bedienungsanleitung

Victory

Victory VUR-3-BT Betriebsanleitung

Victory

Victory RIS-1D-S1-XH-HC Bedienungsanleitung

Victory

Victory RIA-1D-S7 Bedienungsanleitung

Victory

Victory UR-27-SST Bedienungsanleitung

Victory

Victory HR-1D-7-EW Betriebsanleitung

Victory

Victory VSR-1 Bedienungsanleitung

Victory

Victory DRS-2D-S1-LD-HC Bedienungsanleitung

Victory

Victory VBC-75 Bedienungsanleitung

Victory

Victory VUR-5-18BT Bedienungsanleitung

Victory

Victory CBR36HC-1 Bedienungsanleitung

Victory

Victory UR-27-SBS Bedienungsanleitung

Victory

Victory VUR-72-12 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung