VideoHome XTV2.0 Bedienungsanleitung

TV2.0

Unique USB 2.0 TV box

User's Manual

________________________________________________________________________________

FEDERAL COMMUNICATIONS COMMISSION

This device complies with Part 15 of the FCC Rules Operation is subject to

the following two conditions: this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiated

radio frequency energy and, if not installed and used in accordance with the

instruction, may cause harmful interference to radio communication.

However, there is no grantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by tuning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Notice: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

CE DECLARATION

This device complies with CE . These limits are designed to provide

reasonable protection against harmful interface in a residential installation.

Printed in TAIWAN R.O.C No.01071504

All contents are subject to change without notice.

All trademarks are the property of their respective owner

TableofContents

Chapter 1. Overview ---------------------------------------------------------- 1

1.1 Introduction ----------------------------------------------------------------- 1

1.2 Features --------------------------------------------------------------------- 1

1.3 Specifications --------------------------------------------------------------- 2

1.4 Package Contents --------------------------------------------------------- 2

1.5 Minimal System Requirements ----------------------------------------- 2

Chapter 2. Installation ------------------------------------------------------- 3

2.1 Hardware device description ------------------------------------------- 3

2.2 Application Software(TV Jukebox) Installation --------------------- 4

2.3 Driver Installation ---------------------------------------------------------- 5

Chapter 3. Basic Function Operating ------------------------------- 8

3.1 Starting -----------------------------------------------------------------------

3.2 Preview -----------------------------------------------------------------------

3.3 Close --------------------------------------------------------------------------

3.4 Pause ------------------------------------------------------------------------

3.5 Stop ---------------------------------------------------------------------------

3.6 Record -----------------------------------------------------------------------

3.7 TV/Composite/S-video Display ----------------------------------------

3.8 Channel Scan --------------------------------------------------------------

3.9 Channel Click --------------------------------------------------------------

3.10 Setting -----------------------------------------------------------------------

3.11 Minimize ---------------------------------------------------------------------

3.12 Time Shift -------------------------------------------------------------------

3.13 Color Control ---------------------------------------------------------------

3.14 Still Image Capture -------------------------------------------------------

3.15 Schedule Recording ------------------------------------------------------

3.16 Last Channel ----------------------------------------------------------------

3.17 Mute ---------------------------------------------------------------------------

3.18 Help ---------------------------------------------------------------------------

3.19 Last Channel ---------------------------------------------------------------

3.20 Mute --------------------------------------------------------------------------

3.21 Help ---------------------------------------------------------------------------

Chapter 4. Trouble Shooting -----------------------------------------------

______________________________________________________________________________

Chapter1.Overview

1.1 Introduction

Congratulations on your purchase of “XTV20”. The “XTV20” bring a

home entertainment system and video-editing studio to your PC and

Notebook. Using the latest USB2.0 technology, you can now watch and

record TV/Video in DVD quality.

XTV20 with both video and audio captured through USB, there is no

need to use audio cable connect audio card in XP environment.

Also no need to use external power adapter, especially suitable for

laptop/notebook user.

Featured ergonomic functions includes remote control, timeshifting,

schedule recording, snapshot, channel preview….

1.2 Features

 USB2.0 high speed TV device support real-time TV, S-video and

composite video input

 Both audio and video go through USB( XP OS), audio no need though

audio card

 No need to use external power adapter

 Auto channel scan

 Full TV frequency function support

 Fine tune function to adjust signal quality

 Full screen display

 16 channel preview

 PIP(Picture-in-Picture) mode

 Parental Channel Lock-Out

 Time-shifting

 Favorite TV program setting

 Analog video(S-video, Composite) input, Multi-system video support

 Real-time MPEG1/2/4/AVI recording and playback

 Schedule recording for TV program

 Snapshot push button support

 Plug-and-play support for quick connection and easy capture

 Powerful video editing function include Motion Video Special Effects/

Title Effects/ Picture-in-Picture Effects/ Slow & Fast Motion Video

_____________________________________________________________

Chapter 1. Overview

Effects/ background music/ color background/ Transitional Effects

 Bi-lingual function available for different model

1.3 Specifications

 TV : 75 ohm coaxial TV Antenna/Cable input

 Analog video in : One S-video and one composite video input

 Audio in :Two L/R RCA audio input

 Audio output : in XP audio go through USB, in Win2000 audio though

Sound card,

 Video system : NTSC, PAL, SECAM multi system support

 Motion capture : MPG1/2/4 and AVI format support

 Still image capture : 720x576(PAL) and 720x480(NTSC) BMP/JPG/TIF/

PCX/TGA file format support

 Performance : Up to 25 fps at 720x576 for PAL, 30 fps at 720x480 for

NTSC

 Power Source : 5VDC, 450mA(max) through USB port, no need power

adapter

1.4 Minimum System Requirements

 Pentium4 1G or higher CPU

 Microsoft Windows 2000/XP

 64MB RAM (128MB RAM recommended)

 300MB of available hard disk space (4GB recommended)

 USB 2.0 equipped computer

 CD-ROM drive

 Sound card

1.5 Package Contents

 XTV20 USB2.0 TV box

 One 3.5mm stereo to 3.5mm stereo audio cable

 USB cable

 Remote controller

 TV jukebox Software CD

 Ulead VideoStudio editing software CD

 Manual

_____________________________________________________________

Chapter 2. Installation

Please make sure your computer has USB2.0 port correctly installed

and functioning !! ( We strongly recommend updating your WinXP to

SP1 or Win2000 to SP4 and updating USB2.0 host driver before

installation to make sure computer’s USB2.0 port is correctly

functioning )

Steps: (1) Install AP software (see 2.2)

(2) Install Driver (see 2.3)

(3) Plug XTV hardware (see 2.3)

2.1 Hardware device description

TV : Connect to TV antenna/cable

USB : Connect use bundled USB cable connect to USB 2.0 port of your

computer

Sin : S-Video input from external A/V device(e.g.VCR)

Vin:Composite video input from external A/V device(e.g.VCR)

Ain:Audio L/R input from external A/V device(e.g.VCR)

Aout : In WinXP, not required in XP O/S

In Win2000, please connect bundled stereo cable to line-in

of Sound card

Snapshot : Instantaneous still image capture

Power LED : Power on indicator

_____________________________________________________________

Chapter 2. Installation

2.2 Application Software (TV Jukebox) Installation

※ Do not connect XTV to computer USB port before software

installation

2.2.1. Please insert "Multimedia Installation Kit" CD-ROM into your

CD-ROM drive; Run " E:\XTV20\SETUP.EXE "; (assuming

CD-ROM drive in E drive)

Please type in serial No., (see Serial No. on CD-ROM envelop)

※Serial number is case sensitive

Click“OK”

2.2.2. Welcome to the InstallShield wizard and Click “Next”

2.2.2. Choose destination location and click “Next”

2.2.3.Select Program Folder; Click “Next”

2.2.4. Finished Jukebox software installation; Click “Finish”

2.2.5.Install “Windows Media Format 9 Series Runtime Setup”;

Click “Yes”

2.2.6.License agreement; Click “Yes”

2.2.7. Finished Windows Media Format 9 Series Runtime Setup;

Click “Ok”

Finished AP software installation

_____________________________________________________________

Chapter 2. Installation

2.3. Driver Installation

2.3.1. Please insert "Multimedia Installation Kit" CD-ROM into your

CD-ROM drive; Run " E:\XTV20\Driver\SETUP.EXE "; (assuming

CD-ROM drive in E drive)

Click "Next"

2.3.2. Complete Setup Wizard; Click "Finish"

2.3.3. Plug the XTV device into computer’s USB2.0 port; System will

detect new Video device as below.

Choose “Install the software automatically (Recommended)”

AndClick“Next”

_____________________________________________________________

Chapter 2. Installation

2.3.4. When Windows XP show message about this software didn’t pass

windows logo, please click “Continue Anyway” (though XTV

driver did not apply for windows logo approval, it is thoroughly

tested by engineers, and it will not cause harm to your system)

2.3.5. Complete the video driver installation

Click “Finish”

2.3.6. System detect new Audio device as below.

Choose “Install the software automatically (Recommended)”

AndClick“Next”

_____________________________________________________________

Chapter 2. Installation

2.3.7. When Windows XP show message about this software didn’t pass

windows logo, please click “Continue Anyway” (though XTV

driver did not apply for windows logo approval, it is thoroughly

tested by engineers, and it will not cause harm to your system)

2.3.8. Complete the Audio driver installation

Click “Finish”

2.3.9. Please check XTV driver was install successful in your

computer; (Go to My Computer->Control Panel->System

->Hardware->Device manager”)

There are XTV2.0 and USB EMP Audio Device

_____________________________________________________________

Andere Handbücher für XTV2.0

Inhaltsverzeichnis

Andere VideoHome Set-Top-Box Handbücher

VideoHome

VideoHome XTV2.0 Bedienungsanleitung

Beliebte Set-Top-Box Handbücher anderer Marken

VBrick

VBrick 8000-0188 Bedienungsanleitung

Kogan

Kogan KGNPVR500VAA Bedienungsanleitung

Asus

Asus O!PLAY MEDIA PRO Bedienungsanleitung

Samsung

Samsung ICU 100 Bedienungsanleitung

VECTORMAX

VECTORMAX A12E Bedienungsanleitung

DStv

DStv Explora Bedienungsanleitung

Ace Digital TV

Ace Digital TV ADB 3800 Bedienungsanleitung

Cisco

Cisco 4398DVB Bedienungsanleitung

Polaroid

Polaroid KHA-01651B Bedienungsanleitung

Samsung

Samsung GX-SM530CF Bedienungsanleitung

BT Business Total Broadband Bedienungsanleitung

Megasat

Megasat HD 720 plus Bedienungsanleitung

Sungale

Sungale STB608 Bedienungsanleitung

Amino

Amino Amigo 7X Bedienungsanleitung

Geniatech

Geniatech ATV225 Bedienungsanleitung

Android

Android Androidminibox mx2 se Bedienungsanleitung

Hama

Hama Internet TV Box Bedienungsanleitung

Ariva

Ariva T650i Bedienungsanleitung