Vidifox DV 550S Bedienungsanleitung
1
Vidifox® Document Camera
DV 550S
USER MANUAL
Please read this User Manual thoroughly before you use the document camera. Keep the CD-ROM in
a convenient place so you can use it quickly if you need to.
Please visit us at http://www.waninusa.com where you can get product support, the latest driver
updates, and answers to frequently asked questions (FAQs) and technical questions.
2
PRECAUTIONS
NOTICES: PLEASE READ CAREFULLY BEFORE USE
Use the document camera under the rated electric conditions.
Do not place the document camera on anyunstable surface. It may fall and cause injuries or
damages.
Do not place this device directly under sunlight or near heaters.
Do not place this device near water.
Keep the camera away from acid or alkali gas.
Do not place this document camera in humid, dusty, windy or vibrant locations.
The recommended operating environment is:
Temperature: 32ºF-113ºF (0ºC--45ºC)
Humidity: less than 75%
Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not
use volatile solvent.
When this equipment functions abnormally, such as smoke, smell, noise, immediately
unplug and call for professional assistance.
Unplug the document camera or shut off the power when not in use.
Legal Notice
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Compilation and Publication Notice
This manual has been compiled and published to cover the latest product’s descriptions and
specifications. The contents of this manual and the specifications of this product are subject to
change without notice.
Wanin USA reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused by
reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
© 2010 Wanin USA Inc.
3
TABLE OF CONTENTS
1. PARTS IDENTIFICATION.................................................................5
2. CONTROL PANEL..............................................................................6
3. INPUTSAND OUTPUTS ....................................................................7
4. REMOTE CONTROL .........................................................................8
5. CONNECTIONS...................................................................................9
5.1. COMPUTER CONNECTION...........................................................................................9
5.2. USB CONNECTION.......................................................................................................10
5.3. RGB INPUTAND OUTPUT...........................................................................................10
5.4. DVI OUTPUT..................................................................................................................11
5.5. C-VIDEO & S-VIDEO INPUT .......................................................................................11
5.6. C-VIDEO & S-VIDEO OUTPUT ...................................................................................12
6. RS232 SOFTWARE............................................................................12
6.1 COMPUTER REQUIREMENTS.....................................................................................12
6.2. SOFTWARE INSTALLATION .......................................................................................12
6.3 SOFTWARE SETTINGS..................................................................................................15
6.4. BUTTON INSTRUCTION..............................................................................................17
7. USB FUNCTION ................................................................................19
7.1. USB-A..............................................................................................................................19
7.2. USB-B..............................................................................................................................19
7.2.1. COMPUTER REQUIREMENTS.........................................................................19
7.2.2. PREPARATION FOR INSTALLATION..............................................................19
7.2.3. SOFTWARE INSTALLATION ............................................................................23
7.2.4. START THE SOFTWARE ..................................................................................27
7.2.5. IMAGE CONTROL..............................................................................................28
7.2.6. IMAGE CAPTUREAND VIDEO RECORDING................................................30
7.2.7. SETTING..............................................................................................................31
7.2.8. IMAGE MODIFY.................................................................................................32
8. FEATURES .........................................................................................37
LIGHT.....................................................................................................................................37
ZOOM INAND ZOOM OUT ................................................................................................37
POSITIVE/NEGATIVE CONVERSION ...............................................................................37
FOCUS ADJUSTMENT.........................................................................................................37
BRIGHTNESS ADJUSTMENT.............................................................................................37
WHITE BALANCE ADJUSTMENT.....................................................................................37
4
IMAGE FREEZE....................................................................................................................37
IMAGE ROTATE....................................................................................................................38
SPLIT SCREEN......................................................................................................................38
TITLE FUNCTION ................................................................................................................38
PICTURE IN PICTURE FUNCTION....................................................................................38
IMAGE SAVE.........................................................................................................................38
IMAGE RECALL...................................................................................................................38
RGB INPUT SWITCH ...........................................................................................................38
OUTPUT SWITCH.................................................................................................................38
USB IMAGE CAPTURE AND VIDEO RECORDING.........................................................38
USB 2.0 PORT........................................................................................................................38
RS232 CONTROL..................................................................................................................39
9. SPECIFICATION...............................................................................39
10. TROUBLE-SHOOTING: ................................................................40
11. PACKING LIST................................................................................41
12. TECHNICAL SUPPORT...............................................................412
5
1. PARTS IDENTIFICATION
1. LED light box
2. Remote control IR receiver
3. Camera
4. Rear panel
5. Side panel-1
6. Side panel-2
7. Base light
8. Control panel
9. LCD screen
6
2. CONTROL PANEL
1. : Turn on/off the power.
2. MENU ENTER: Enter the On-Screen Menu.
3. HOME: Output the image from the camera.
4. PC:Output the signal from VGA input.
5. VIDEO: Output the signal that from the C-Video/S-Video input.
6. LAMP: Turn on/off the LED light.
7. AUTO: Carry out auto focus, color adjustment and white balance.
8. FOCUS:Adjust focus manually, focus far and focus near.
9. ZOOM: Image zoom in and zoom out control.
7
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. RS 232: Serial port, to control the document camera by a computer via this port.
3. COMPUTER &AUDIO IN: Computer signal (and audio signal) input.
4. COMPUTER OUT: Output the signal that from the COMPUTER IN connector.
5. DVI OUT: DVI signal output (DVI-A).
6. AUDIO OUT:Audio output.
7. PROJECTOR OUT: Output the signal to a projector or other display.
8. USB-A: Communicate with USB device, such as USB mouse or USB drive.
9. RGB &AUDIO IN: RGB signal (and audio signal) input(15 pin D-SUB).
10. USB-B: Capture image into a connected computer via provided software.
Download the saved images from internal memory to computer.
11. C-VIDEO OUT: Composite video output.
12. S-VIDEO OUT: S-Video output.
13. C-VIDEO &AUDIO IN: Composite Video signal (and audio signal) input.
14. MIC: Microphone input.
15. S-VIDEO &AUDIO IN: S-Video signal (and audio signal) input.
8
4. REMOTE CONTROL
1. Save: Capture the image in display.
2. Recall: a. Image recall mode enabled, display the saved images.
b. When a USB drive is connected, press Recall to show the content that in the USB
drive.
c. Back to upper level in Image Recall mode.
3. Title: Enable the title function (title freezing).
4. Split: Split screen, enable the comparison between the frozen image and live image.
5. Neg: Switch the image mode between positive and negative.
6. Rotate: Rotate the image by 90o, 180o, 270o.
7. Freeze: Freeze/unfreeze the image.
8. PIP: Active the Picture in Picture function.
a. Press Recall button, then use arrow button to select a saved image, press PIP to choose it
for PIP image.
b. Press Recall to exit the image recall mode, press PIP again, then a small window will
appear on the lower right corner, showing the selected saved image.
9. Page +/-:Page up and page down in Image Recall mode.
10. Home: Output the image from the camera.
11. Red+/-:Image color adjustment (red).
9
12. SXGA/XGA: Switch the output format between SXGA and XGA.
13. Blue+/-: Image color adjustment (blue).
14. PC 1/2: Switch the input between PC1 and PC2.
15. Video 1/2: Switch the input between Video1 and Video2.
16. Menu Enter: a. Active the on-screen menu.
b. Display the selected image in Image Recall mode.
17. Arrow buttons: a. Move the cursor when the on-screen menu is activated.
b. Navigate between image thumbnails in Image Recall mode.
18. USB: Switch the USB function between USB camera (capture the image from camera to PC
and USB storage (download image from camera to PC).
19. Zoom+/-: Image zoom in and zoom out control.
20. Auto: Carry out auto focus, color adjustment and white balance adjustment.
21. Focus+/-:Adjust focus manually, focus far and focus near.
22. Bright+/-: Image brightness adjustment.
5. CONNECTIONS
5.1. COMPUTER CONNECTION
To RS232
To RGB Output To PC Monitor
To Audio Output
To USB
Rear panel
Side panel-1
To Audio Input
10
5.2. USB CONNECTION
USB
Side panel-1
5.3. RGB INPUT AND OUTPUT
Inhaltsverzeichnis
Andere Vidifox Dokumentenkamera Handbücher
Vidifox
Vidifox DV 480 Bedienungsanleitung
Vidifox
Vidifox PV 380 Bedienungsanleitung
Vidifox
Vidifox PV 700ST Bedienungsanleitung
Vidifox
Vidifox i3030 Bedienungsanleitung
Vidifox
Vidifox GV 200 Bedienungsanleitung
Vidifox
Vidifox GV 400 Bedienungsanleitung
Vidifox
Vidifox i3780T Bedienungsanleitung
Vidifox
Vidifox DV 485 Bedienungsanleitung
Vidifox
Vidifox PV 360 Bedienungsanleitung
Vidifox
Vidifox PV 490S Bedienungsanleitung
