Viessmann Vitodens 200-W System Betriebsanleitung

VIESMANN

Service instructions

for contractors

Vitodens 200-W

Type WB2B, 45 and 60 kW

Wall mounted gas fired condensing boiler

Natural gas and LPG version

For applicability, see the last page

VITODENS 200-W

5692 683 GB 6 /2007 Please keep safe.

Please follow these safety instructions closely to prevent accidents and

material losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and

environmental pollution.

Note

Details identified by the word "Note"

contain additional information.

Target group

These instructions are exclusively

designed for qualified personnel.

&Work on gas equipment must only

be carried out by a qualified gas fit-

ter.

&Work on electrical equipment must

only be carried out by a qualified

electrician.

&The system must be commissioned

by the system installer or a qualified

person authorised by the installer.

Regulations

Observe the following when working

on this system

&all legal instructions regarding the

prevention of accidents,

&all legal instructions regarding

environmental protection,

&the Code of Practice of relevant

trade associations,

&all current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards.

If you smell gas

Danger

Escaping gas can lead to

explosions which may result in

serious injury.

&Never smoke. Prevent naked

flames and sparks. Never

switch lights or electrical

appliances ON or OFF.

&Close the gas shut-off valve.

&Open windows and doors.

&Remove all people from the

danger zone.

&Notify your gas or electricity

supplier from outside the

building.

&Shut off the electricity supply

to the building from a safe

place (outside the building).

If you smell flue gas

Danger

Flue gas can lead to life-threa-

tening poisoning.

&Shut down the heating sys-

tem.

&Ventilate the boiler room.

&Close all doors leading to the

living space.

Safety instructions

5692 683 GB

Working on the system

&When using gas as fuel, also close

the main gas shut-off valve and

safeguard against unauthorised

reopening.

&Isolate the system from the power

supply and check that it is no longer

'live', e.g. by removing a separate

fuse or by means of a main isolator.

&Safeguard the system against

unauthorised reconnection.

!Please note

Electronic modules can be

damaged by electro-static dis-

charges.

Touch earthed objects, such as

heating or water pipes, to dis-

charge static loads.

Repair work

!Please note

Repairing components which

fulfil a safety function can com-

promise the safe operation of

your heating system.

Replace faulty components

only with original Viessmann

spare parts.

Ancillary components, spare and

wearing parts

!Please note

Spare and wearing parts which

have not been tested together

with the heating system can

compromise its function. Instal-

ling non-authorised compo-

nents and non-approved

modifications/conversion can

compromise safety and may

invalidate our warranty.

For replacements, use only ori-

ginal spare parts from

Viessmann or those which are

approved by Viessmann.

Safety instructions (cont.)

Safety instructions

5692 683 GB

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance ................................... 5

Further details regarding the individual steps .............................................. 7

Coding

Code 1........................................................................................................ 37

Code 2........................................................................................................ 40

Resetting codes to their delivered condition ................................................ 60

Service scans

Service level overview ............................................................................... 61

Temperatures, boiler coding card and brief scans ....................................... 62

Checking outputs (relay test) ...................................................................... 65

Scanning operating conditions and sensors ................................................ 66

Troubleshooting

Fault display ............................................................................................... 69

Fault codes................................................................................................. 71

Repairs ...................................................................................................... 82

Function description

Constant temperature control unit ............................................................... 91

Weather-compensated control unit.............................................................. 92

Extensions for external connections (accessories) ...................................... 94

Control functions ........................................................................................ 98

Remote control DIP switches ...................................................................... 104

Electronic combustion control unit............................................................... 105

Designs

Connection and wiring diagram –internal connections ................................ 107

Connection and wiring diagram –external connections ............................... 108

Parts lists .................................................................................................. 110

Commissioning/service reports

Specification............................................................................................. 116

Certificates

Declaration of conformity ............................................................................ 118

Manufacturer's certificate according to the 1st BImSchV [Germany]............. 119

Keyword index .......................................................................................... 120

Index

5692 683 GB

For further information regarding the individual steps, see the page indicated

Commissioning steps

Inspection steps

Maintenance steps Page

!!!



•01. Filling the heating system ................................................. 7

•02. Venting the boiler .................................................................. 8

•03. Venting the heating system............................................... 8

•04. Filling the siphon with water............................................. 9

••• 05. Checking all connections on the heating water

side and DHW side for leaks

•06. Checking the power supply connection

• • 07. Setting the time and date (if required) –only for

weather-compensated control units.............................. 9

•08. Selecting the language (if required) –only for

weather-compensated control units.............................. 10

• • 09. Checking the gas type......................................................... 10

•10. Gas type conversion (only for operation with LPG).11

••• 11. Function sequence and possible faults........................ 11

••• 12. Checking the static and supply pressure .................... 13

•13. Setting the maximum output ........................................... 15

•14. Checking the balanced flue system for soundness

(annular gap check) ............................................................. 16

• • 15. Removing the burner and checking the burner

gasket (replace gasket every 2 years)........................... 17

• • 16. Checking the burner gauze assembly &replacing,

if required................................................................................. 19

• • 17. Checking and adjusting the ignition and ionisation

electrodes ................................................................................ 20

• • 18. Cleaning the combustion chamber/heat exchanger

and installing the burner .................................................... 20

• • 19. Checking the condensate drain and cleaning the

siphon........................................................................................ 22

Steps - commissioning, inspection and maintenance

Commissioning, inspection, maintenance

5692 683 GB

Commissioning steps

Inspection steps

Maintenance steps Page

!!!



• • 20. Checking the neutralising system (if installed)

• • 21. Checking the diaphragm expansion vessel and

system pressure.................................................................... 22

••• 22. Checking the function of all safety valves

••• 23. Checking the tightness of electrical connections

••• 24. Checking all gas equipment for soundness at

operating pressure .............................................................. 22

••• 25. Flue gas emissions test...................................................... 23

••• 26. Checking the external LPG safety valve (if

installed)

•27. Matching the control unit to the heating system ...... 24

•28. Adjusting the heating curves (only for weather-

compensated control units).............................................. 30

•29. Connecting the control unit to the LON system

(only for weather-compensated control units) .......... 33

•30. Instructing the system user .............................................. 35

•31. Scanning and resetting the "Service" display ........... 35

Steps - commissioning, inspection and . . . (cont.)

Commissioning, inspection, maintenance

5692 683 GB

Filling the heating system

!Please note

Unsuitable fill water increases the level of deposits and corrosion and

may lead to boiler damage.

&Thoroughly flush the entire heating system prior to filling it with water.

&Only use fill water of potable quality.

&Soften fill water with a water hardness in excess of the following

values, e.g. with a small softening system for heating water (see the

Viessmann Vitoset pricelist):

&–Vitodens 200-W to 45 kW: 3.0 mol/m

&–Vitodens 200-W from 60 kW and multi-boiler systems: 2.0 mol/m

&An antifreeze additive suitable for heating systems can be mixed with

the fill water. The antifreeze manufacturer must verify its suitability.

1. Check the inlet pressure of the dia-

phragm expansion vessel.

2. Close the gas shut-off valve.

3. Fill the heating system at the boiler

fill & drain valve A(on the connec-

tion set, accessories or on-site).

(Minimum system pressure

> 1.0 bar).

4. Close boiler fill & drain valve A.

Further details regarding the individual steps

Commissioning, inspection, maintenance

5692 683 GB

Venting the boiler

1. Close the shut-off valves on the

heating water side.

2. Connect the drain hose at the boiler

fill & drain valve B(on the connec-

tion set, accessories or on-site).

3. Open valves Aand Band vent

using mains pressure until no more

air noise is audible.

4. Close valves Aand Band open

the heating water shut-off valves.

Venting the heating system

1. Close the gas shut-off valve and

switch ON the control unit ON/OFF

switch.

2. Activate the venting program via

coding address "2F:1".

Note

To call up code 1 and for setting the

coding address, see page 37.

For function and sequence of the

venting program, see page 99.

Whilst the venting program runs,

the display shows "EL" (constant

temperature control unit) or

"Entlüftung" (venting) (weather-

compensated control unit).

3. Check the system pressure.

Further details regarding the individual steps (cont.)

Commissioning, inspection, maintenance

5692 683 GB

Filling the siphon with water

1. Remove retaining clip Aand pull

out insert B.

2. Fill siphon Cwith water and reas-

semble.

Note

Install the supply hose the correct

way round.

Setting the time and date (if required) –only for weather-

compensated control units

Note

&During commissioning, or after a

prolonged time out of use, it may be

necessary to reset the time and

date, if the time flashes in the dis-

play.

&During commissioning these terms

appear in German (delivered condi-

tion):

Time (see step 1)

Date (see step 2)

Press the following keys:

1. a/bfor the current time.

2. dto confirm; "Datum" (date)

is displayed.

3. a/bfor the current date.

4. dto confirm.

Further details regarding the individual steps (cont.)

Commissioning, inspection, maintenance

5692 683 GB

Selecting the language (if required) –only for weather-com-

pensated control units

Note

When the unit is first taken into opera-

tion the display is in German (default

language setting):

Select heating circuit (see step 1.)

Outside temperature (see step 3.)

Press the following keys:

1. c"Heizkreis wählen" (select

heating circuit) is displayed.

2. dto confirm; wait approx. 4 s.

3. cpress this button again,

"Außentemperatur" (outside

temperature) is displayed.

4. bfor the required language.

5. dto confirm.

Checking the gas type

The boiler is equipped with an electronic combustion control unit that adjusts

the burner for optimum combustion in accordance with the prevailing gas qual-

ity.

&The boiler can be operated with natural gas in the Wobbe index range 10.0 to

16.1 kWh/m

(36.0 to 58.0 MJ/m

) without conversion.

&Convert the burner for operation with LPG (see "Gas type conversion" on

page 11).

1. Determine the gas type and Wobbe

index by asking your local gas sup-

ply utility or LPG supplier.

2. Convert the burner for operation

with LPG (see page 11).

3. Record the gas type in the service

report on page 115.

Further details regarding the individual steps (cont.)

Commissioning, inspection, maintenance

5692 683 GB

Andere Handbücher für Vitodens 200-W System

Inhaltsverzeichnis

Andere Viessmann Kessel Handbücher

Viessmann

Viessmann VITOCROSSAL 300 Betriebsanleitung

Viessmann

Viessmann VITORONDENS 200-T Betriebsanleitung

Viessmann

Viessmann VITOPLEX 300 Betriebsanleitung

Viessmann

Viessmann Vitodens 200-W System Kurzanleitung

Viessmann

Viessmann KOB PYROT KRT SERIES Gebrauchsanweisung

Viessmann

Viessmann VITOCROSSAL 200 Bedienungsanleitung

Viessmann

Viessmann VITOROND 200 Betriebsanleitung

Viessmann

Viessmann VITOCELL 100-U Betriebsanleitung

Viessmann

Viessmann B1KA Kurzanleitung

Viessmann

Viessmann Vitodens 300 Bedienungsanleitung

Viessmann

Viessmann VITOCROSSAL 300 Betriebsanleitung

Viessmann

Viessmann VITODENS 200-W B2HA 112 Bedienungsanleitung

Viessmann

Viessmann VITOROND 200 VD2A-125 Bedienungsanleitung

Viessmann

Viessmann Vitocrossal 300 Series Betriebsanleitung

Viessmann

Viessmann Vitodens 222-F Gebrauchsanweisung

Viessmann

Viessmann Pyrot 150 Gebrauchsanweisung

Viessmann

Viessmann Vitodens 222-F Kurzanleitung

Viessmann

Viessmann Vitorond 100 Betriebsanleitung

Viessmann

Viessmann Vitodens 100-W Bedienungsanleitung

Viessmann

Viessmann VITOCROSSAL 300 Betriebsanleitung

Viessmann

Viessmann Vitodens 100 Kurzanleitung

Viessmann

Viessmann EVO-COOL Series Bedienungsanleitung

Viessmann

Viessmann Vitodens 200-W System Betriebsanleitung

Viessmann

Viessmann Vitodens 200-W System Betriebsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch