Adjusting the Volume
V.-Gently press the Remote Control or press the "Vol +" button on the device to increase the volume
V.-Gently press the Remote Control or press the "Vol -" button on the device to lower the volume
Note:
V.-Under normal circumstances, the "Vol +"and "Vol -" buttons are used to control the volume and
not to adjust the menu.
Choice of Signal Input
V.-Gently press the Remote Control "AUX (POWER)" button or the "AUX" button on the device to
skip between AUXI and AUX2 signals.
V.-The purpose of the AUX3 signal input (Mini socket) is to allow easy connection for video
recording or to improve XXX. If you use this facility, you can use a Mini AV
connection to plug into the AUX3 input. The monitor will automatically detect the signal.
On-Screen (OSD) Menu Functions
The On-Screen Menu is accessed using the MENU button on the front panel or remote control. Different
programs will be launched every time you press the button (when scrolling to the last program, clicking on
the button can exit the menu screen)
The adjustment options can be selected using the MENU button on the front panel or using the VOL+/
VOL- buttons on the remote control.
Note:
Under normal circumstances, the Menu screen will be automatically exited after a 10-sec interval.
Picture Brightness (BRIGHT)
On the Menu screen, select the 'BRIGHT' option to begin adjusting the brightness. The range of brightness
that can be adjusted is between -16 to +16
Color (COLOR)
On the Menu screen, select the 'COLOR' option to begin adjusting the color consistency. The range of
color consistency that can be adjusted is between -16 to +16
Picture Contrast (CONT)
On the Menu screen, select the 'CONT' option to begin adjusting the contrast. The range of contrast that
can be adjusted is between -16 to +16
Tint (TINT)
On the Menu screen, select 'TINT' option to begin adjusting the tone. The range of tone that can be
adjusted is between -16 to +16.
N.B.: The present Menu is NTS Compatible.
Lighting (LIGHT)
On the Menu screen, select the 'LIGHT' option to begin adjusting the picture lighting. You can choose
LIT1, LlT2, LIT3 and LIT4 picture lighting options.
Symmetry (REV)
On the Menu screen, select the 'REV' option to begin adjusting the symmetry. You can choose from the
REVI, REV2, REV3 and REV4 options.
Mode (MODE)
On the Menu screen, select the 'MODE' option to begin adjusting the display. You can choose between the
NORM (4:3) and FULL (16:9) options.
Adjusting the Volume
8
