VIETA Smart Beat 4 Bedienungsanleitung
USER MANUAL
MVR04
Thank you for purchasing the Beat 4 Smartwatch MVR04.
To ensure correct operation, please read this manual carefully before use.
English
Beat 4
Smartwatch
Have a problem
with your product?
Contact us at:
Email: [email protected]
www.vietapro.com
The adaptation platform requirements
Android 4.4 and above support.
iOS 9.0 and above support.
Bluetooth 3.0 and Bluetooth 4.0
2. Android/Apple:
Android: search for "WearPro" though the software application
(Google Play Store) to download and install the application.
Apple: search for " WearPro " though the software application (Apple
App Store) to download and install the application.
1. can the QR with your smartphone
to access to WearPro application
App download method:
www.vietapro.com
IMPORTANT: The recommended WearPro app versions for Android
and iOS is 1.7.3.
IMPORTANT: Please instead of pairing from smartphone “Bluetooth”
settings, follow the steps described on “How to pair” (to get all the
Bluetooth communication between smartphone and watch).
NOTE: User can customize the wallpaper of the smartwatch with
“WearPro” application. To do this, look for information in the
application’s user manual.
To ensure the normal use of smartwatch, please charge it before using
it for the first time.
Please use matching charging cable to charge, and connect the
charging points on bracelet with the pin on the charger following the
correct position.
For charging the smartwatch, please plug the USB end of the charging
cable into the USB port of a standard phone charger, desktop or laptop
computer with a standard 5V output. Not recommended to charge
Care for Vieta Smart Beat 4 before using
www.vietapro.com
Connect the magnetic connector into the
charging position as shown in the figure
below, using smartphone charger 5V/1A.
using power bank as the output voltage is not of standard 5V.
On the smartwatch screen, the charging process will be displayed,
showing the battery status. Once charged it, the full battery will be
displayed as full of charge.
It’s not possible to set the time of the smartwatch without
synchronizing with the Smartphone, because the watch time always
show the same as Smartphone have. If you set the time on your
Smartphone, it will automatically sync to the smartwatch.
NOTE: The battery consumption of the smartwatch is higher when it
remains connected and synchronizing data with your smartphone.
Therefore, it’s recommended keep it disconnected when you finish to
use between them.
Charging instructions
www.vietapro.com
Pair the Vieta Smart Beat 4 with your smartphone
Turn on the smartwatch; press and hold the right button for many
seconds to turn the device on (and o).
Verify that your smartwatch is not connected to another smartphone
before connecting your smartphone. Otherwise, as the smartwatch is
already connected to another smartphone, you will not be able to
connect yours. To verify this, on the main watch screen, slide your
finger from top to bottom to access the basic settings center, and
check that the pairing icon is grey [Bluetooth unpaired
(Disconnected)], indicating that there is no active pairing.
Bluetooth not paired.
(Disconnected from smartphone).
Bluetooth paired. – Data.
(Connected to smartphone).
Bluetooth paired. – Data and Calls.
(Connected to smartphone).
www.vietapro.com
In case that this icon appears green, unlink the smart watch from the
Smartphone to which it’s connected, and thus have a free connection
on your watch to make the pairing process with your smartphone.
Available the Bluetooth on your Smartphone. Active your GPS on the
smartphone.
Go to Bluetooth settings on your Smartphone, to wait the smartwatch
reference, that will appear following the next step.
On your smartwatch Beat 4, on the main screen, swipe from bottom
to top to access app center, and select “Call” application. Press on
“Open” and will activate the Bluetooth.
www.vietapro.com
Search on your smartphone the reference that will appear on the call
application on the smartwatch Beat 4, as Vieta Beat ####. Select this
reference, and keep the permissions that require to pair between
them.
Smartwatch: Smartphone:
IMPORTANT: This Bluetooth pairing procedure is to be able to
perform Call, Music, Notifications and matters not related to the use of
the WearPro application.
When you have done this pairing, you will not be able to use a
Bluetooth headset or any audio player device on your smartphone. All
Bluetooth calling smart watch meet this point.
www.vietapro.com
After pairing the smartphone with the smartwatch, access the WearPro
application (previously downloaded from Android Google Play or iOS
Play Store).
Access the "Devices" section, select "Link Device Now", and on the
devices screen select "Search" (in the upper right corner). Then, select
"Synchronize data" to share information.
www.vietapro.com
The "Smart Watch Beat 4" will appear in the device list. Verify that the
MAC address is the correct one with your watch. To do this, access the
basic settings center on your watch and click on
IMPORTANT: Before the entire pairing process between Vieta Smart
Beat 4 and your smartphone, it is important that you have activated the
GPS location of your smartphone, in order to start the pairing process.
www.vietapro.com
Start-up functions of Vieta Smart Beat 4
Smartwatch right side button: use this button to;
- Power ON/OFF: press and hold the button for many seconds to turn
ON/OFF the device.
- Rotate to change the wallpaper: rotate up and down the button
located on the right side of the watch, to select the dierent wallpa-
pers and appearances of the Vieta Smart Beat 4.
- Return to the main screen: when you are in an application of the
smartwatch, pressing the button, you will go back to the main screen
of the device, thus existing the application that you were previously
viewing.
When you are inside the any application, if you slide you finger from
left to right, you can go back to the previous screen (without having to
press the side button on the watch to go back to the main screen).
Smart Watch Display;
By swiping from left to right, or from top to bottom, dierent function
menus will appear and become accessible by further selection.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere VIETA Betrachten Handbücher
