Viewpro QIR19 Bedienungsanleitung

User Manual

QIR19 19mm Single ThermalGimbal Camera

User Manual

Standard Version

标准版快拆版

Viewport Version

For more details please scan the QR code

or visit our website:

www.viewprotech.com

Disclaimer and Warning

Legends

1.1 Introduction

1.Product Introduction

Important NoteWarning

QIR19 is a high-precision 3-axis gimbal integrated with a 19mm lens

640*480 IR thermal sensor, supports 1x ~ 4x digital zoom. It

supports IR thermal image switch, IR color palette switch, photo-

graphing and video, target tracking and thermal digital zoom. OSD

can display angle, digital zoom times, status of record and picture

mode, tracking frame, also can select to turn off the OSD. When the

external GPS and time input, GPS coordinate and shooting time can

be saved in image file, OSD can display GPS and real-time as well.

The 3 axis gimbal can achieve stabilization in yaw, roll and pitch. The

integrated design of damping system and gimbal can greatly reduce

mechanical vibration.

QIR19 is widely used in UAV industries of public security, electric

power, fire fighting, zoom aerial photography and other industrial

applications.

Congratulations on purchasing your new Viewpro product. Please

read this entire document carefully. Failure to read or follow instruc-

tions and warnings in this document may result in damage to your

Viewpro product. Disassemble the gimbal camera by user is not

permitted, as which may cause the camera does not work normally.

Viewpro accepts no liability for damage, injury or any legal responsi-

bility incurred directly or indirectly from the use of this project. The

user shall observe safe and lawful practices including, but no limited

to, those set forth in the manual.

1.2 In the Box

A. Standard Version

B. Viewport Version

Gimbal Camera

x 1 pc

USB to TTL Cable

x 1 pc

Power Cable

x 1 pc

Gimbal Camera

x 1 pc

USB to TTL Cable

x 1 pc

M3 Screw

x 8 pcs

Copper Cylinder

x 4 pcs

Copper Cylinder

x 4 pcs

Power Cable

x 1 pc

PWM Control Cable

x 1 pc

M3 Screw

x 8 pcs

2.1 Overview

TTL / S.BUS Control

Cable x 1 pc

TTL Connect Cable

x 3 pcs

Ethernet Cable x 1 pc

Viewport

Control Box Back Side

(Standard Version)

(Viewport Version)

[12]

[13]

[11]

[10]

2. Installation Instruction

[3]

[2]

[1]

[8]

[6]

[9]

[4]

]

[7]

[1] Control box

[2] Upper damping board

[3] Lower damping board

[4] Infrared thermal camera

[6] Yaw axis motor

[7] Roll axis motor

[8] TF card slot

[9] Pitch axis motor

[10] 3-6S power interface

[11] Micro HDMI interface

[12] Ethernet interface

[13] Viewport unlock button

[5] Damping ball

2.2.1 Control Box Printing (Standard Version)

PITCH

Yellow Jumper Cap

GND

YAW

MODE

ZOOM

FOCUS

PIC/REC

MULTI

USB

5V output

GND

123

Please ensure that there isn’t any obstacle while the

motor rotating.

Please remove the obstacle immediately if gimbal

camera is blocked during rotation.

Don’t put the infrared thermal camera towards the

sun in case any burn to the camera

The input voltage cannot be higher than 6S.

The pin insertion interface cannot be connected with

power supply.

The yellow jumper cap cannot be removed

Front Side

2.2.2 Control Box Printing (Viewport Version)

Left Side

Right Side

PITCH

YAW

MODE

ZOOM

FOCUS/PPM

PIC/REC

MULTI

GND

CVBS

3S-6S

GND

POWER PWM

GND

CANL

CANH

DC5V

GND

S.BUS

TTX

GND

RXD

TXD

RX-

RX+

TX-

TX+

ETHERNET UART & S.BUS CAN

Unit: mm

2.3 Device Dimensions (Standard Version)

4-φ3.1

60.0

24.5

86.2

140.4

108

Unit: mm

2.3 Device Dimensions (Viewport Version)

Control Box

78.0

41.6

4-φ3.1

146.3

86.2 108.0

78.0

41.6

2.4 Install Mounting Part

(1) Find out the arrow on the gimbal which indicating the yaw

heading of the payload (i.e. the lens direction when the camera

power on), and synchronize with the direction specified by the UAV.

(2) Fix one end of the copper cylinder on the screw hole of lower

damping board, and use M3 screw to fasten it.

(3) According to the provided screw hole dimension you can make

suitable mounting holes on the UAV mounting board, and fixes the

other end of the copper cylinder on the mounting board of the UAV

(Viewport version is the same).

Front

2.5 Viewport Release Instruction

1. Make sure the two white stripes indicated in above picture are

aligned with each other. (If the stripes are not aligned to each other,

please pinch the connector part and turn it to left manually)

Inhaltsverzeichnis

Andere Viewpro Digitalkamera Handbücher

Viewpro

Viewpro Q10TRIM Bedienungsanleitung

Viewpro

Viewpro Q30TIRM pro Bedienungsanleitung

Viewpro

Viewpro Z40K Bedienungsanleitung

Viewpro

Viewpro Z5S Bedienungsanleitung

Viewpro

Viewpro Z30F Bedienungsanleitung

Viewpro

Viewpro Z30UX Bedienungsanleitung

Viewpro

Viewpro Z30N Bedienungsanleitung

Viewpro

Viewpro Q20KTIR Bedienungsanleitung

Viewpro

Viewpro X30TL Bedienungsanleitung

Viewpro

Viewpro Q10N Bedienungsanleitung

Viewpro

Viewpro ZIR25T Bedienungsanleitung

Viewpro

Viewpro Q20T Bedienungsanleitung

Viewpro

Viewpro Z40TIR Bedienungsanleitung

Viewpro

Viewpro ZIR35T Bedienungsanleitung

Viewpro

Viewpro Q20K Bedienungsanleitung

Viewpro

Viewpro Z40K Bedienungsanleitung

Viewpro

Viewpro Z-Fusion pro Bedienungsanleitung

Viewpro

Viewpro Z10TIR-LC Bedienungsanleitung

Viewpro

Viewpro Z30TE Bedienungsanleitung

Viewpro

Viewpro Q10T Bedienungsanleitung

Viewpro

Viewpro Z25K Bedienungsanleitung

Viewpro

Viewpro Z10N Bedienungsanleitung

Viewpro

Viewpro Z40K Bedienungsanleitung

Viewpro

Viewpro X30TM Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung