ViewSonic VS13784 Bedienungsanleitung
ViewSonic®
Model No. : VS13784
DPF8-CAM
Digital Photo Frame
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Kullanιcι kιlavuzu
- Gebruikshandleiding
- Pyководство пользователя
- 使用手冊 (繁體)
- 使用手册 (简体)
- 사용자 안내서
- ユーザーガイド
IMPORTANT: Please read this User Guide to obtain important
information on installing and using your product in a safe
manner, as well as registering your product for future service.
Warranty information contained in this User Guide will describe
your limited coverage from ViewSonic Corporation, which is
also found on our web site at http://www.viewsonic.com in
English, or in specic languages using the Regional selection
box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las
instrucciones en este manual”
ViewSonic i DPF8-CAM
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
For Canada
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive
2006/95/EC.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive
2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent
or discarded batteries or accumulators as unsorted municipal waste, but use the return
and collection systems available.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content
of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004%
Lead.
ViewSonic ii DPF8-CAM
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. P
rotect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is located
near the unit so that it is easily accessible.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the unit. When a cart is used, use caution when moving the cart/unit
combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled
onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not
operate normally or has been dropped.
15. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
16. Only use battery packs approved by the manufacturer or else damage may occur.
ViewSonic iii DPF8-CAM
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+)0.1% < 0.1%
Polybrominated biphenyls
(PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not
specically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic iv DPF8-CAM
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this
material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic®
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may
mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
DPF8-CAM
ViewSonic Digital Photo Frame
VS13784
DPF8-CAM_UG_ENG Rev. 1B 02-18-11
_______________________________
_______________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for
being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
ViewSonic 1 DPF8-CAM
Table of Contents
Getting Started................................................................ 2
Package Content .................................................................................. 2
Product Features .................................................................................. 2
Photo frame Overview .......................................................................... 3
How to set up the stand........................................................................ 4
Connecting to AC power ....................................................................... 5
Powering on/off your photo frame......................................................... 5
Using the internal/ external memory devices........................................ 5
Operations and Functions............................................. 6
Best Capture Environment.................................................................... 6
Setting language................................................................................... 6
Recapturing old photos......................................................................... 7
Playing back your les.......................................................................... 9
Setting Date /Time / Alarm.................................................................... 11
Main Menu............................................................................................ 12
Advanced Setting.................................................................................. 13
Appendix ......................................................................... 14
Troubleshooting .................................................................................... 14
Using Remote Control .......................................................................... 14
Specications........................................................................................ 15
ViewSonic 2 DPF8-CAM
Package Content
Product Features
Photo frame Frame Stand AC adapter USB cable
Remote Control CD Quick Start Guide
- 20.32 cm (8’’) Digital photo frame with 5 Mega-pixel camera
- 8’’ TFT LCD display (800x600 pixels)
- Fixed focus
- Removable and extendable stand for digitalizing old pictures
- Auto slideshow with multiple transition effects
- Supports high resolution pictures (JPEG) up to 16 Mega-pixel
- Supports SD, SDHC, MMC, MS Pro card (up to 32GB) and USB ash drive
- Sleep mode as auto-off function for saving power
- USB 2.0 high speed
- Calendar, clock, and alarm
The package contains the following items:
Getting Started
ViewSonic 3DPF8-CAM
Photo frame Overview
Menu Navigation
Prop *
USB drive connector
SD/SDHC/MMC/
MS Pro card slot
EXIT button
(Up button
Down button
Left button
Right button)
MENU button
Power indicator
Crop control
Power switch
COPY button
DELETE button
DC power jack/USB
connector for PC
Lens
LCD Panel
Camera button
(use this button to
take a photo)
Infrared
receiver for
Remote Control
Slideshow / OK
button
(use this button
to play/pause
slideshow)
Speaker and
Ventilatory holes
* Follow the diagram on the
left to extract the prop to
support the photo frame.
ViewSonic 4DPF8-CAM
Stand
Photo Frame
12
How to set up the stand
1) Align the mark on the stand with the mark on the back of the photo frame.
Then gently place the ring of the stand on top of the lens to attach the stand.
2) Gently rotate the stand clockwise as indicated until the mark is aligned with the
mark.
3) Unfold the stand on the table by following the steps in the illustrations:
4) Place the photo frame on a at surface such as a table.
ViewSonic 5 DPF8-CAM
To power on the photo frame, turn the power switch to the ON position. When power
is turned on, the power indicator will light up. To power off the photo frame, turn the
power switch to the OFF position.
Connect one end of the accessory power
cable to the photo frame, and then
connect the power adapter to a power
socket.
Note: Always use the accessory power cable
only.
You can use the internal memory, or the compatible external memory devices
( SD/SDHC/MMC/MS Pro/USB drive) to store the photos you took.
Note: If you connect the external memory devices to the photo frame rst and then power
on it, the data in the USB drive will be read rst. However, if the photo frame is already
powered on, the memory device that inserted lastly will be read rst.
Connecting to AC power
Powering on/off your photo frame
Using the internal/ external memory devices
Power indicator
Power switch
SD/SDHC/MMC/
MS Pro card slot
USB drive connector
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ViewSonic Digitaler Bilderrahmen Handbücher
ViewSonic
ViewSonic VFM1024w-11 Bedienungsanleitung
ViewSonic
ViewSonic VFA720w-10 Bedienungsanleitung
ViewSonic
ViewSonic VFM1035-52 Bedienungsanleitung
ViewSonic
ViewSonic DF87G-533 Bedienungsanleitung
ViewSonic
ViewSonic DPX704WH Bedienungsanleitung
ViewSonic
ViewSonic DPX702 Bedienungsanleitung
ViewSonic
ViewSonic VFA724W Kurzanleitung
ViewSonic
ViewSonic VFD875 Bedienungsanleitung
ViewSonic
ViewSonic DP701W4 Bedienungsanleitung
ViewSonic
ViewSonic VFM836-54 Bedienungsanleitung
ViewSonic
ViewSonic VFD820-70 Bedienungsanleitung
ViewSonic
ViewSonic DPF8-CAM Bedienungsanleitung
ViewSonic
ViewSonic VFD720-12 - Digital Photo Frame Bedienungsanleitung
ViewSonic
ViewSonic VFA770w-50E Bedienungsanleitung
ViewSonic
ViewSonic PortraitView VFM620w-50 Bedienungsanleitung
ViewSonic
ViewSonic VFM620w-70 Bedienungsanleitung
ViewSonic
ViewSonic VFM1024w-11 Bedienungsanleitung
ViewSonic
ViewSonic VFM836-54 Bedienungsanleitung
ViewSonic
ViewSonic VS13442 Bedienungsanleitung
ViewSonic
ViewSonic VFP838-11 Bedienungsanleitung
Beliebte Digitaler Bilderrahmen Handbücher anderer Marken
Philips
Philips SPF1327 Bedienungsanleitung
Philips
Philips SPF7010/10 Bedienungsanleitung
Digital Spectrum
Digital Spectrum MemoryVue MV-1500 Bedienungsanleitung
YURAKU
YURAKU YUR.PHOTO 7B4C Bedienungsanleitung
Denver
Denver PFF-710WHITE MK2 Bedienungsanleitung
Pandigital
Pandigital PAN8000DWPCF1 Bedienungsanleitung
