ViewSonic PD0524 Bedienungsanleitung
PD0524
Signature Pad
User Guide
Model No. VS18281
P/N: PD0524
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”
2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
3
Safety Precautions
Please read the following Safety Precauons before you start using the device.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instructions.
• Allow at least 4" (10 cm) clearance around the device to ensure proper
ventilation.
• Place the device in a well-ventilated area. Do not place anything on the device
that prevents heat dissipation.
• Do not use the device near water. To reduce the risk of fire or electric shock, do
not expose the device to moisture.
• Avoid exposing the device to direct sunlight or other sources of sustained heat.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that may increase the temperature of the
device to dangerous levels.
• Use a soft, dry cloth to clean the external housing. Please see the "Maintenance"
section for more information.
• Oil may collect on the screen if you touch it. Please see the "Maintenance"
section for more information.
• Do not touch the screen surface with sharp or hard objects, as it may cause
damage to the screen. Only use the supplied pen.
• When moving the device, be careful not to drop or bump the device on
anything.
• Do not place the device on an uneven or unstable surface. The device may fall
over resulting in an injury or a malfunction.
• Do not place any heavy objects on the device or connection cables.
• If smoke, an abnormal noise, or a strange odor is present, immediately turn the
device off and call your dealer or ViewSonic®. It is dangerous to continue using
the device.
• When connecting to a power outlet, DO NOT remove the grounding prong.
Please ensure grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched,
particularly at the plug, and at the point where it emerges from
the equipment. Ensure that the power outlet is located near the
equipment so that it is easily accessible.
• Only use attachments/accessories specified by the manufacturer.
• Disconnect the device if it is not going to be used for a long period of time.
4
Contents
Safety Precautions....................................................... 3
Introduction ................................................................ 5
Package Contents ...................................................................................................5
Product Overview...................................................................................................6
Making Connections.................................................... 7
Using the Display......................................................... 9
Using the Pen Tether..............................................................................................9
Status Indicator Light............................................................................................10
Appendix................................................................... 11
Specifications........................................................................................................11
Display................................................................................................................... 11
Pen ........................................................................................................................ 11
Product Dimensions .............................................................................................12
Troubleshooting ...................................................................................................13
Maintenance.........................................................................................................14
General Precautions.............................................................................................. 14
Cleaning the Screen............................................................................................... 14
Cleaning the Case.................................................................................................. 14
Replacing a Pen Nib..............................................................................................15
Regulatory and Service Information .......................... 16
Compliance Information.......................................................................................16
FCC Compliance Statement................................................................................... 16
Industry Canada Statement................................................................................... 16
CE Conformity for European Countries ................................................................. 16
Declaration of RoHS2 Compliance......................................................................... 17
Indian Restriction of Hazardous Substances ......................................................... 18
Product Disposal at End of Product Life................................................................ 18
Copyright Information ..........................................................................................19
Customer Service .................................................................................................. 20
Limited Warranty .................................................................................................. 21
Mexico Limited Warranty...................................................................................... 24
5
Introduction
Package Contents
PD0524
Signature Pad
USB 2.0 cable
(Type-A to Micro
USB)
Pen Replacement Pen nib
x 3
PD0524
Pen Display
Quick Start Guide
Guide de démarrage rapide
Guía rápida de inicio
⺩廝‣搾ㄉ⁈
2
ViewSonicPen Display Website: https://www.viewsonic.com/viewsign/products
Customerservice contact information: USA- [email protected] / China- [email protected] / Global- [email protected]
Green light : Connected successfully
Voyant vert : Connexion réussie
Luz verde: conectado correctamente
䶇䆯ㇷ⊆怊㎌㜓㩆
Blue light : Pen touching
Voyant bleu : contact du stylo
Luz azul: lápiz tocando
喴䆯姟㎎䬭㎌姟ㄆㆰ
PD0524_QSG_Rev.1a_20200930
Copyright© 2020 ViewSonic Corporation. All rights reserved.
Pen tether Nib removal tool Quick Start Guide
NOTE: The contents included in your package may vary depending on your
country. Please contact your local reseller for more informaon.
6
Product Overview
1 1
1
1
22
3
4
5
6
7
8
8
8
1 1
1
1
22
3
4
5
6
7
8
8
8
1. Cable Channel 2. Pen Tether
Anchor Point
3. Pen Holder 4. Status Indicator Light
5. Display Screen 6. Security Lock Slot 7. Micro USB Port 8. Pen
7
Making Connecons
System Requirements:
Operang system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above
1. Turn the device over so the boom side is facing up.
1
2
Top Boom
2. Connect the Micro USB end of the USB cable to the Micro USB Port on the device.
1
2
3. Route the USB cable through the preferred cable channel.
8
4. Connect the other end of the USB cable to a computer. The Status Indicator Light
will turn green once successfully connected.
1
2
99
Using the Display
Using the Pen Tether
The Pen Tether can be aached to the Pen and one of the two available anchor
points.
1010
Status Indicator Light
The Status Indicator Light will turn green once successfully connected to a
computer.
When the Pen touches the Display Screen, the Status Indicator Light will turn blue.
Inhaltsverzeichnis
