ViewSonic VE800 Bedienungsanleitung

User Guide

Guide de l’utilisateur

Bedienungsanleitung

Guía del usuario

Guida dell'utente

Guia do usuário

Användarhandbok

Käyttöopas

Руководство пользователя

Instrukcja obsługi

Full 18.1" Diagonal Viewable Screen

VE800 ViewPanel®

Contents

Product Registration............................................. 2

For Your Records................................................. 2

Getting Started

Package Contents................................................ 3

Precautions .......................................................... 3

Quick Installation.................................................. 4

Installation of Wall Mount (Optional) .................... 5

Using the ViewPanel Display

Setting the Timing Mode ...................................... 6

OSD and Power Lock Settings............................. 6

Adjusting the Screen Image ................................. 7

Main Menu Controls ............................................. 9

Other Information

Specifications ..................................................... 12

Troubleshooting ................................................. 13

Customer Support .............................................. 14

Cleaning the ViewPanel Display ........................ 15

Limited Warranty ................................................ 16

Appendix

Safety Guidelines ............................................... 17

Compliance Information for U.S.A...................... 18

CE Conformity for Europe .................................. 18

07/08/02 BViewSonic VE800 1

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC

are trademarks of VESA.

ENERGY STAR®is a registered trademark of the U.S. Environmental Protection Agency (EPA).

As an ENERGY STAR®partner, ViewSonic Corporation has determined that this product meets the

ENERGY STAR®guidelines for energy efficiency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this mate-

rial, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available,

please register your product on the Internet at: www.viewsonic.com.The ViewSonic®Wizard CD-

ROM also provides an opportunity for you to print the registration form, which you may mail or fax

to ViewSonic.

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product

properly at the end of its useful life. Your local waste disposal company may provide information

about proper disposal.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

ViewSonic VE800

Getting Started

Congratulations on your purchase of a ViewSonic®ViewPanel®display.

Important! Save the original box and all packing material for future shipping

needs.

NOTE: The word “Windows” in this user guide refers to the following

Microsoft operating systems: Windows 95, Windows NT, Windows 98,

Windows 2000, Windows Me (Millennium), and Windows XP.

Package Contents

Your ViewPanel package includes:

• ViewPanel display

• Power cords

• Video cable

• ViewSonic Wizard CD-ROM

NOTE: The CD jacket contains the Quick Start Guide, and the CD includes the

User Guide PDF files and INF/ICM display optimization files. The INF file

ensures compatibility with Windows operating systems, and the ICM file (Image

Color Matching) ensures accurate on-screen colors. ViewSonic recommends that

you install both files.

Precautions

• Sit at least 18" from your ViewPanel display.

•Avoid touching the screen. Skin oils are

difficult to remove.

•Never remove the rear cover. Yo u r

ViewPanel display contains high-voltage

parts. You may be seriously injured if you

touch them.

• Avoid exposing your ViewPanel display to

direct sunlight or another heat source. Orient

your ViewPanel display away from direct

sunlight to reduce glare.

• Always handle your ViewPanel display with

care when moving it.

• Place your ViewPanel display in a well-

ventilated area. Do not place anything on your

ViewPanel display that prevents heat

dissipation.

• Ensure the area around the ViewPanel display

is clean and free of moisture.

• Do not place heavy objects on the ViewPanel

display, video cable, or power cord.

• If smoke, abnormal noise, or strange odor is

present, immediately switch the ViewPanel

display off and call your dealer or ViewSonic.

It is dangerous to continue using the

ViewPanel display.

ViewSonic VE800 3

Quick Installation

Optional: For instructions on wall mounting,

see page 5 of this user guide.

1 Connect power cord

2 Connect video cable

•Make sure both the ViewPanel®display

and computer are turned OFF

•Remove rear panel covers if necessary

•Connect the video cable from the

ViewPanel to the computer

Macintosh users: Models older than G3

require a Macintosh adapter. Attach the

adapter to the computer and plug the video

cable into the adapter.

To order a ViewSonic®Macintosh adapter,

contact ViewSonic Customer Support.

3 Turn ON ViewPanel display and

computer

•Turn ON the ViewPanel display, then

turn ON the computer. This sequence

(ViewPanel display before computer)

is important

NOTE: Windows users may receive a

message asking them to install the INF file.

This is on the CD.

4 Insert the ViewSonic Wizard CD

into the computer’s CD drive

•Follow the on-screen instructions

If your computer does not have a CD-ROM

drive, see “Customer Support.”

(1) Wait for the CD-ROM to auto-start.

NOTE: If the CD-ROM does not auto-start:

double-click on the CD-ROM icon in the

Windows Explorer, then double-click on

viewsonic.exe.

(2) Follow the on-screen instructions.

5 Windows users: Set the timing

mode (resolution and refresh

rate)

Example: 1280 x 1024 @ 60 Hz.

For instructions on changing the resolution

and refresh rate, see the graphic card’s user

guide.

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to

the instructions that come with the base mounting kit. To convert your

ViewPanel from a desk-mounted to a wall-mounted display, do the following:

1Disconnect Power.

2As you face the front of the

ViewPanel, notice the button on

the right side. Press the button

and push the ViewPanel back and

down flat against the base as

shown.

3Lay the ViewPanel face down on

a towel or blanket. Notice the

four screw holes on the bottom of

the base.

4Attach the mounting bracket

from the VESA compatible wall-

mounting kit (100 mm x 100 mm

distance).

5Attach the ViewPanel to the wall,

following the instructions in the

wall-mounting kit.

Press this button

Four

screw

holes

Mounted

on the wall

ViewSonic VE800 5

Using the ViewPanel Display

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the

screen image and minimizing eye strain. The timing mode consists of the

resolution (example 1280 x 1024) and refresh rate (or vertical frequency;

example 60 Hz). After setting the timing mode, use the OnView®controls

to adjust the screen image.

For the best picture quality set your ViewPanel®display timing mode to:

VESA 1280 x 1024@ 60 Hz.

To set the Timing Mode:

1Set the resolution: Right-click on the Windows desktop > Properties >

Settings > set the resolution.

2Set the refresh rate: See your graphic card's user guide for instructions.

WARNING: Do not set the graphics card in your computer to exceed the

maximum refresh rate of 75Hz; doing so may result in permanent damage to

your ViewPanel display.

OSD and Power Lock Settings

•OSD Lock: Press and hold [1] and the up arrow ▲for 10 seconds. If any

buttons are pressed the message OSD Locked will display for a few seconds.

•OSD Unlock: Press and hold [1] and the up arrow ▲again for 10 seconds.

•Power Button Lock: Press and hold [1] and the down arrow ▼for 10

seconds. If the power button is pressed the message Power Button Locked

will display for a few seconds. With or without this setting, after a power

failure, your ViewPanel display’s power will automatically turn ON when

power is restored.

•Power Button Unlock: Press and hold [1] and the down arrow ▼again for

10 seconds.

ViewSonic VE800 6

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OnView®

controls. The OnView controls are explained at the top of the next page and are

defined in “Main Menu Controls”on page 9.

Scrolls through menu

options and adjusts the

displayed control.

Displays, saves

changes to, and exits

the Main Menu.

Power On/Off

Selects a highlighted control.

Also, displays the control screen

for the selected control and

toggles between control pairs.

Power light

Front Control Panel

Main Menu

with OnView controls

ViewSonic VE800 7

Do the following to adjust the screen image:

1To display the Main Menu, press button [1].

NOTE: All OnView menus and adjustment screens disappear automatically

after about 30 seconds. This time period is adjustable through the Setup menu

and the OSD timeout control described on page 11.

2To highlight a control you want to adjust, press ▲or ▼to scroll up or down

the Main Menu.

3To select the highlighted control, press button [2]. A control screen appears

like the example shown below.

4To adjust the control, press the up ▲or down ▼buttons.

5To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display:

•Adjust your computer's graphic card so that it outputs a video signal 1280 x

1024 @ 60 Hz to the ViewPanel display. (Look for instructions on “changing

the refresh rate”in your graphic card's user guide.)

•If necessary, make small adjustments using H POSITION and V POSITION

until the screen image is completely visible. (The black border around the

edge of the screen should barely touch the illuminated “active area”of the

ViewPanel®display.)

The ▼

down

arrow decreases

Contrast, ▲up

arrow increases

Contrast.

The line at the

bottom of the screen

tells you what you

can do next: select

the Brightness

control or Exit.

ViewSonic VE800 8

Main Menu Controls

Adjust the menu items shown below by using the up ▲ and down ▼ buttons.

Control Explanation

Auto Image Adjust automatically sizes, centers, and fine tunes

the video signal to eliminate waviness and distortion.

Press the [2] button to obtain a sharper image.

NOTE: Auto Image Adjust works with most common video

cards. If this function does not work on your ViewPanel®, then

lower the video refresh rate to 60 Hz and set the resolution to its

pre-set value.

Contrast adjusts the difference between the image background

(black level) and the foreground (white level).

Brightness adjusts background black level of the screen image.

Color Adjust provides several color options: preset color

temperatures and User which allows you to adjust red (R), green

(G), and blue (B). The factory setting for this product is 6500K

(6500 Kelvin).

User — Individual adjustments for red, green, and blue.

5400K —Adds blue and green to the screen image for a darker

color.

6500K — Adds red to the screen image for warmer white and

richer red. Default setting.

9300K — Adds blue to the screen image for cooler white (used

in most office settings with fluorescent lighting).

1To select color (R, G or B) press button [2].

2To adjust selected color, press ▲or ▼.

3When you are finished making all color adjustments, press

button [1] twice.

Information displays the timing mode (video signal input)

coming from the graphics card in your computer. See your

graphic card’s user guide for instructions on changing the

resolution and refresh rate (vertical frequency).

VESA 1280 x 1024 @ 60 Hz (recommended) means that the

resolution is 1280 x 1024 and the refresh rate is 60 Hertz.

ViewSonic VE800 9

Andere Handbücher für VE800

Inhaltsverzeichnis

Andere ViewSonic Monitor Handbücher

ViewSonic

ViewSonic VX2481-MH Bedienungsanleitung

ViewSonic

ViewSonic EP2203r Bedienungsanleitung

ViewSonic

ViewSonic VA2463-H Bedienungsanleitung

ViewSonic

ViewSonic TD2420 Bedienungsanleitung

ViewSonic

ViewSonic VE170m Bedienungsanleitung

ViewSonic

ViewSonic IFP8662 Bedienungsanleitung

ViewSonic

ViewSonic VG921m-2 Bedienungsanleitung

ViewSonic

ViewSonic TD2740 Bedienungsanleitung

ViewSonic

ViewSonic N4050W Bedienungsanleitung

ViewSonic

ViewSonic VX912-4 Bedienungsanleitung

ViewSonic

ViewSonic VG720 - 17" LCD Monitor Bedienungsanleitung

ViewSonic

ViewSonic TD2210 Bedienungsanleitung

ViewSonic

ViewSonic VP2785-4K Bedienungsanleitung

ViewSonic

ViewSonic VG932m-LED Bedienungsanleitung

ViewSonic

ViewSonic VS17789 Bedienungsanleitung

ViewSonic

ViewSonic VG2239m-LED Bedienungsanleitung

ViewSonic

ViewSonic VG2401mh-PRO Bedienungsanleitung

ViewSonic

ViewSonic VG910B - 19" LCD Monitor Bedienungsanleitung

ViewSonic

ViewSonic P95f+ Kurzanleitung

ViewSonic

ViewSonic VA708a Bedienungsanleitung

ViewSonic

ViewSonic VA1938wa-LED Bedienungsanleitung

ViewSonic

ViewSonic VG2427WM - 24" LCD Monitor Bedienungsanleitung

ViewSonic

ViewSonic V3D245 Bedienungsanleitung

ViewSonic

ViewSonic G70F - 17" CRT Display Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung