ViewSonic VG3448 Bedienungsanleitung
VG3448
Display
User Guide
Model No. VS17740
P/N: VG3448
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”
2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic® !
3
Please read the following Safety Precautions before you start using the device.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instructions.
• Sit at least 18" (45 cm) away from the device.
• Allow at least 4" (10 cm) clearance around the device to ensure proper
ventilation.
• Place the device in a well-ventilated area. Do not place anything on the device
that prevents heat dissipation.
• Do not use the device near water. To reduce the risk of fire or electric shock, do
not expose the device to moisture.
• Avoid exposing the device to direct sunlight or other sources of sustained heat.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that may increase the temperature of the
device to dangerous levels.
• Use a soft, dry cloth to clean the external housing. For more information, refer
to the "Maintenance" secon on page 54.
• Oil may collect on the screen as you touch it. To clean the greasy spots on the
screen, refer to the "Maintenance" secon on page 54.
• Do not touch the screen surface with sharp or hard objects, as it may cause
damage to the screen.
• When moving the device, be careful not to drop or bump the device on
anything.
• Do not place the device on an uneven or unstable surface. The device may fall
over resulting in an injury or a malfunction.
• Do not place any heavy objects on the device or connection cables.
• If smoke, an abnormal noise, or a strange odor is present, immediately turn the
device off and call your dealer or ViewSonic®. It is dangerous to continue using
the device.
• Do not attempt to circumvent the safety provisions of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the plug does not
fit into your outlet, obtain an adapter and do not attempt to force the plug into
the outlet.
4
• When connecting to a power outlet, DO NOT remove the grounding
prong. Please ensure grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched,
particularly at the plug, and at the point where it emerges from
the equipment. Ensure that the power outlet is located near the
equipment so that it is easily accessible.
• Only use attachments/accessories specified by the manufacturer.
• When a cart is used, use with caution when moving the cart/equipment
combination to avoid injury from tipping over.
• Disconnect the power plug from the AC outlet if the device is not being
used for a long period of time.
• Refer all servicing to qualified service personnel. Service will be
required when the unit has been damaged in any way, such as:
if the power supply cord or plug is damaged
if liquid is spilled onto or objects fall in the unit
if the unit is exposed to moisture
if the unit does not operate normally or has been dropped
• NOTICE: LISTENING THROUGH EAR-/HEADPHONES AT A HIGH VOLUME FOR
EXTENDED PERIODS CAN CAUSE HEARING DAMAGE/HEARING LOSS. When using
ear-/headphones, adjust the volume to appropriate levels, or hearing damage
may result.
• NOTICE: THE MONITOR MAY OVERHEAT AND SHUTDOWN! If the device shuts
down automatically, please turn on your monitor again. After rebooting, change
your monitor's resolution and refresh rate. For details, please refer to the
graphics card's user guide.
5
Contents
Safety Precautions....................................................... 3
Introduction ................................................................ 7
Package Contents ...................................................................................................7
Product Overview...................................................................................................8
Initial Setup................................................................. 9
Installing the Stand.................................................................................................9
Wall Mounting......................................................................................................12
Using the Security Slot..........................................................................................14
Making Connections.................................................. 15
Connecting to Power ............................................................................................15
Connecting External Devices ................................................................................16
HDMI Connection.................................................................................................. 16
DisplayPort and miniDP Connection ..................................................................... 17
USB Connection..................................................................................................... 18
Using the Monitor ..................................................... 19
Adjusting the Viewing Angle.................................................................................19
Height Adjustment ................................................................................................ 19
Tilt Angle Adjustment............................................................................................ 20
Swivel Angle Adjustment....................................................................................... 21
Turning the Device On/Off ...................................................................................22
Using the Control Panel Keys................................................................................23
Quick Menu........................................................................................................... 23
Hot Keys ................................................................................................................ 25
Configuring the Settings .......................................................................................27
General Operations............................................................................................... 27
On-Screen Display (OSD) Menu Tree .................................................................... 30
Menu Options ....................................................................................................... 36
6
Appendix................................................................... 45
Specifications........................................................................................................45
Glossary ................................................................................................................47
Troubleshooting ...................................................................................................52
Maintenance.........................................................................................................54
General Precautions.............................................................................................. 54
Cleaning the Screen............................................................................................... 54
Cleaning the Case.................................................................................................. 54
Regulatory and Service Information .......................... 55
Compliance Information.......................................................................................55
FCC Compliance Statement................................................................................... 55
Industry Canada Statement................................................................................... 55
CE Conformity for European Countries ................................................................. 55
Declaration of RoHS Compliance........................................................................... 56
Indian Restriction of Hazardous Substances ......................................................... 57
Product Disposal at End of Product Life................................................................ 57
Copyright Information ..........................................................................................58
Customer Service .................................................................................................. 59
Limited Warranty .................................................................................................. 60
Mexico Limited Warranty...................................................................................... 63
7
Package Contents
• Monitor
• Power cord
• Video cable
• USB cable
• Quick start guide
The power cord and video cables included in your package may vary
depending on your country. Please contact your local reseller for more
informaon.
9
This secon provides detailed instrucons for seng up your monitor.
The monitor comes packaged in a user friendly box to make installaon
easy.
Installing the Stand
1. Place the box on a at, stable surface and open the front ap of the box to reveal
the contents. Remove the top tray.
2. Remove the monitor stand’s base and neck. Align and connect the three (3)
points on the monitor stand’s base with the monitor stand’s neck.
3. Use the captured screw in the monitor stand’s base and secure it to the monitor
stand’s neck.
1
2
10
4. Align and slide the upper hooks of the monitor stand into the stand mounng
slots as shown in the illustraon below:
Ensure the stand is secure and the quick release tab posively clicks into
place.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ViewSonic Monitor Handbücher
ViewSonic
ViewSonic CD4232 Bedienungsanleitung
ViewSonic
ViewSonic VS17729 Bedienungsanleitung
ViewSonic
ViewSonic CDE3203 Bedienungsanleitung
ViewSonic
ViewSonic VA2046a-LED Bedienungsanleitung
ViewSonic
ViewSonic VS19278 Bedienungsanleitung
ViewSonic
ViewSonic VX2757-mhd Bedienungsanleitung
ViewSonic
ViewSonic VG2439m-LED Bedienungsanleitung
ViewSonic
ViewSonic VE720m Bedienungsanleitung
ViewSonic
ViewSonic VX1945 Bedienungsanleitung
ViewSonic
ViewSonic PD1011 Bedienungsanleitung
ViewSonic
ViewSonic VA2231w-LED Bedienungsanleitung
ViewSonic
ViewSonic VS13518 Bedienungsanleitung
ViewSonic
ViewSonic VS19536 Bedienungsanleitung
ViewSonic
ViewSonic VS10773 Referenzhandbuch
ViewSonic
ViewSonic Optiquest Q9b Bedienungsanleitung
ViewSonic
ViewSonic VP191 VP191b Bedienungsanleitung
ViewSonic
ViewSonic VA3219-4K-MHD-7 Bedienungsanleitung
ViewSonic
ViewSonic EP2203r Bedienungsanleitung
ViewSonic
ViewSonic VA2452S Bedienungsanleitung
ViewSonic
ViewSonic airpanel V110 Montageanleitung
