VIGO System MPPS-01 Bedienungsanleitung
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: info@vigo.com.pl 1
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
Miniature Preamplifier Power Supply
MPPS-01
user's guide
Table of contents
1. Warranty.................................................................................................................................................. 3
2. MPPS-01 overview.................................................................................................................................. 4
2.1. MPPS-01 parameters........................................................................................................................ 4
2.2. Coding the symbol of the power supply.............................................................................................4
2.3. MPPS-01 physical dimensions .........................................................................................................5
2.5. Connectors........................................................................................................................................ 6
2.6. Sample kit wiring............................................................................................................................... 7
3. Getting started – regards complete IR detection kit.................................................................................8
3.1. Unpacking......................................................................................................................................... 8
3.2. Installation & connections..................................................................................................................8
3.3. Switching on procedure..................................................................................................................... 8
4. MPPS-01 other related information..........................................................................................................9
4.1. CE statement of conformity ..............................................................................................................9
4.2. Electromagnetic interference............................................................................................................. 9
4.3. Operating temperature.......................................................................................................................9
4.4. Storage information........................................................................................................................... 9
5. Safety instructions.................................................................................................................................10
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 2
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
1. Warranty
VIGO System S.A. hereby represents and warrants all Products manufactured by VIGO and sold hereunder to be free from
defects in workmanship or material during a period of twelve (12) months from the date of delivery save for products for which
a special warranty is given. If any Product proves however to be defective in workmanship or material within the period herein
provided VIGO System undertakes to the exclusion of any other remedy to repair or at its own option replace the defective
Product or part thereof free of charge and otherwise on the same conditions as for the original Product or part without exten -
sion to original warranty time. Defective parts replaced in accordance with this clause shall be placed at the disposal of VIGO.
VIGO also warrants the quality of all repair and service works performed by its employees to products sold by it. In case
the repair or service works should appear inadequate or faulty and should this cause malfunction or nonfunctioning
of the product to which the service was performed VIGO shall at its free option either repair or have repaired or replace
the product in question. The working hours used by employees of VIGO for such repair or replacement shall be free of charge
to the client. This service warranty shall be valid for a period of six (6) months from the date the service measures were com-
pleted.
This warranty is however subject to following con itions:
1. A substantiated written claim as to any alleged defects shall have been received by VIGO System within thirty (30) days
after the defect or fault became known or occurred, and
2. The allegedly defective Product or part shall, should VIGO so require, be sent to the works of VIGO or to such other
place as VIGO may indicate in writing, freight and insurance prepaid, properly packed and labeled.
This warranty oes not however apply when the efect has been cause through
1. normal wear and tear or accident;
2. misuse or other unsuitable or unauthorized use of the Product or negligence or error in storing, maintaining or in hand-
ling the Product or any equipment thereof;
3. wrong installation, assembly or failure to service the Product or otherwise follow VIGO's service instructions including
any repairs or installation or assembly or service made by unauthorized personnel not approved by VIGO or replace-
ments with parts not manufactured or supplied by VIGO;
4. modifications or changes of the Product as well as any adding to it without VIGO's prior authorization;
5. burned active element by irradiation above damage thresholds
6. electrostatic discharges
7. improper detector bias
8. improper TE cooler bias (TE cooler damage or active element overheating).
9. other factors dependent on the Customer or a third party.
Notwithstanding the aforesaid VIGO System liability under this clause shall not apply to any defects arising out of materials,
designs or instructions provided by the Customer.
This warranty is expressly in lieu of and excludes all other conditions, warranties and liabilities, expressed or implied, whether
under law, statute or otherwise, including without limitation any implied warranties of merchantability or fitness for a particular
purpose and all other obligations and liabilities of VIGO or its representatives with respect to any defect or deficiency applic-
able to or resulting directly or indirectly from the Products supplied hereunder, which obligations and liabilities are hereby ex-
pressly canceled and waived. VIGO's liability shall under no circumstances exceed the invoice price of any Product for which a
warranty claim is made, nor shall VIGO in any circumstances be liable for lost profits or other consequential loss whether dir-
ect or indirect or for special damage.
RMA Request Instructions:
No Product may be returned without first contacting VIGO for a Return Material Authorization ('RMA') number. Please obtain a
RMA number at [email protected] before returning any item. When requesting a RMA number, please state your order num-
ber, the product you wish to return and the reason for return. We will only accept returns which have a RMA number. Author-
ized returns are to be shipped according to received instruction from VIGO in appropriate shipping box. An unauthorized re-
turn, i.e. one for which an RMA number has not been issued and authorized returns however, shipped with incorrect customs
documents - will not be accepted.
Please print the RMA number clearly on the return label to avoid any delay in processing. Please send package to:
VIGO System S.A.
129/133 Poznanska St.,
PL 05-850 Ozarow Mazowiecki
Poland
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 3
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
2. MPPS-01 overview
The MPPS-01 (Miniature Preamplifier Power Supply) is an universal power adapter especially suited to sup-
ply IR modules with non cooled detectors. Its modern architecture, compact size and low noise level make the usage
simple and convenient. The MPPS-01 is powered directly from the mains.
Features:
•Compact size
•Modern architecture
•Low cost
•Easy to use
•Low power consumption
•Low noise level
•Electrical isolation between input ant output
2.1. MPPS-01 parameters
Parameter Value Unit
Input voltage 100 or 230 * V AC
Output voltage ±9, ±12,
±15, 12/-5 V
Output current 100 mA
* Must be specified in order
2.2. Co ing the symbol of the power supply
Sample symbol of the MPPS-01 power supply
MPPS-01 - xx
09 – power supply ±9 V / ±100 mA
12 – power supply ±12 V / ±100 mA
15 – power supply ±15 V / ±100 mA
G1 – combined power supply (–5 V, 12 V and 7 V) for
VPAC-1000F Preamplifier
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 4
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
2.3. MPPS-01 physical imensions
Dimension are given in millimeters.
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 5
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
2.5. Connectors
The picture below shows the pin configuration of the module.
Amphenol connector mo el C091
Pin Symbol
1TGND Thermoelectric cooler controller ground
2VSUP Power supply output ( )
3GND Ground
4-VSUP Power supply output (-)
5VTEC Thermoelectric cooler controller supply
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 6
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
2.6. Sample kit wiring
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 7
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
MTCC-01
TEC controller
MIPXC-xx
IR module
MPPS-01
power supply
AMPHENOL –
AMP 2x4
supply cable
AMP 2x4 – AMP 2x4
cable
SMA – BNC
signal cable
Mains cord
3. Getting starte – regar s complete IR etection kit
3.1. Unpacking
Before unpacking, verify if there are no visible damages of the package. Report them to the manufacturer or
the distributor.
3.2. Installation & connections
•Mount the IR module in the measurement setup,
•Connect all elements with cables provided in the package,
•Make sure that all the elements are properly connected.
3.3. Switching on proce ure
•Do not switch on the IR module power supply until ALL elements of the IR detection kit are properly connec-
ted with the proper cables,
•Switch on the thermoelectric cooler controller and wait until detector operating temperature is reached and
stabilized. Ready state will be indicated by the „LOCK” green LED light,
•Before starting the measurements make sure the load resistance is valid. IR module output should be termin -
ated by 50Ω or 1MΩ resistance depending on the bandwidth and is given in the test data provided on the
module,
•Do not manipulate any connectors on the active IR kit – this may introduce additional noises to the system or
can cause severe damages due to electrostatic discharges.
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 8
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
4. MPPS-01 other relate information
4.1. CE statement of conformity
VIGO System declares that IR detection kit is fully compliant with:
EU Low Voltage Directives: 73/23/EEC, 93/68/EEC
EU Electromagnetic Compatibility Directives: 89/336/EEC, 91/263/EEC, 92/31/EEC, 93/68/EEC
4.2. Electromagnetic interference
To avoid the electromagnetic interferences (EMI), please do not put any electromagnetic source close to the
IR module. That may cause interference to the input of the preamplifier and disturb the useful signal in the IR track
4.3. Operating temperature
Detector parameters are guaranteed for the environment temperature not exceeding 35 OC.
4.4. Storage information
To ensure reliable operation and long lifetime of detector, the following conditions should be fulfilled:
•Storage temperature: -10ºC ÷ 50ºC and 10% to 90% humidity,
•Avoid exposing to direct sunlight and strong UV/VIS light as this may result in degradation of a detector per-
formance,
•Avoid electrostatic discharges (ESD),
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 9
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
5. Safety instructions
To ensure safe an failure-free operation of the MPPS-01 power supply, comply with the following precau-
tions:
Before connecting the power supply to the mains, make sure it is compatible with the mains voltage and fre-
quency.
The power supply is intended for the indoor use.
Do not use the power supply if the temperature and the air humidity extends the values valid for the PPS-02.
Use the proper cables to connect elements of the kit, dedicated for specified device only. Never cut or shorten
any cable, it may cause damage to your device.
Use the cables delivered by VIGO. In case of OEM systems, make sure the the cables match the specifica-
tion of the controller.
Turn off the power supply before plugging / unplugging cables. Avoid static discharges.
Important note!
If you are setting up own system supplied by the the custom power supply adaptor, please make sure,
the voltage/current matches to the values of the supply requirements of the MPPS-01.
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. 48 22 733 54 20; fax 48 22 733 54 26; e-mail: [email protected] 10
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
Inhaltsverzeichnis
Andere VIGO System Stromversorgung Handbücher
