Product Controls
11
Features: Cycles
Product Controls
10
Wash Cycles
POTS/PANS
Heavily soile pots, pans an casserole ishes. Long heate prewash
loosens up encruste foo . High temperature main wash an final rinse.
NORMAL WASH
Normally soile plates, glasses, bowls, an lightly soile pots an pans.
Energy-usage label is base on this cycle.
LIGHT/CHINA
Lightly soile items, china an crystal. Lower temperatures an pressure
levels for cleaning elicate items.
FAST WASH
To remove light films an resi ue on ishes an glassware. Short wash
times an varying pressures.
RINSE/HOLD
All ishware. Short rinse with no heat.
Options
TOP WASH
Washes ishes on top rack only. Available only with NORMAL WASH.
HI TEMP WASH
Increases the temperature, a ing heat, time an water for improve cleaning
performance. Available only with POTS/PANS an NORMAL WASH.
Note: Periods of soaking will occur to aid in removal of baked on soils.
SANITIZED 155°F RINSE
Raises water temperature to 155°F in the final rinse. A s heat an time
to the cycle. This high temperature rinse sanitizes your ishes an
glassware in accor ance with NSF/ANSI STANDARD 184 for Resi ential
Dishwashers. Certifie for resi ential ishwashers an not inten e for
license foo establishments. Available only with POTS/PANS an
NORMAL WASH.
DELAY START
Lets you elay running the ishwasher for up to 10 hours. To set
“DELAY START”, select the esire wash cycle an option(s). Press the
“DELAY START” button once an the number “2” will light, in icating
a two hour elay. If you esire a longer elay, continue pressing the
“DELAY START” button to a 10 hour elay. The correspon ing number
on the button will light. Once you have set the esire elay time,
press the “START” button an close the oor. “DELAY START” is not
available with the Rinse/Hol cycle.
AUDIBLE SOUND SIGNAL
A single beep will occur when you select cycles, options an press the
“START” key. If the “START” button is not presse or if the oor is not
close within 4 secon s of pressing the “START” button, 3 short beeps
will occur. The en of cycle signal consists of 2 long beeps. For all other
error messages an to eselect the au ible soun signal, see the
Troubleshooting/Fault Co es section.
ILLUMINATION OF BUTTONS
Option, Cycle an Start buttons will only illuminate after they are
selecte . The "SANITIZED" in icator will illuminate when the cycle
has been complete . If your ishwasher i not properly sanitize your
ishes, the in icator light will not illuminate. This can happen if the
cycle is interrupte or the water coul not be heate to the require
temperatures. The "SANITIZED" in icator light goes off after you have
opene an close the oor or if you press an hol the START/RESUME
button. The Start/Resume button will blink if cycle is interrupte .
POWER ON LIGHT
A blue light will illuminate from the bottom mi le of the ishwasher
kickplate when a cycle is running. The Power On light will blink if cycle
is interrupte .
