www.vikingtechnology.com
Table of Tables
Table 2-1: Maximum Sustained Read and Write Bandwidth ____________________________ 13
Table 2-2: Sequential Read and Write Bandwidth (Iometer 06) _________________________ 13
Table 2-2: Random Read/ Write Input/Output Operations per Second (IOPS) (Iometer 06)____ 14
Table 2-3: Timing Specifications _________________________________________________ 14
Table 2-4: STANDBY IMMEDIATE Timing _________________________________________ 15
Table 2-5: Absolute Maximum Ratings ____________________________________________ 15
Table 2-6: Operating Voltage ____________________________________________________ 15
Table 2-7: Current Draw________________________________________________________ 16
Table 2-8: Typical Power Consumption at 3.3V______________________________________ 16
Table 2-9: Temperature and Altitude Related Specifications____________________________ 17
Table 2-10: Shock and Vibration Specifications______________________________________ 17
Table 2-11: Reliability Specifications ______________________________________________ 18
Table 3-1: M.2 SSD weight______________________________________________________ 23
Table 4-1: M.2 SATA Connector Pin Signal Definitions________________________________ 23
Table 5-1: Supported ATA Commands ____________________________________________ 24
Table 5-2: List of Device Identification _____________________________________________ 28
Table 5-3: S.M.A.R.T. Command Set______________________________________________ 33
Table 5-4: Extended SMART Attribute Table________________________________________ 33
Table 5-5: Extended SMART Attribute Actual Data ___________________________________ 34
Table 5-6: Supported S.M.A.R.T. EXECUTE OFF-LINE IMMEDIATE Subcommands________ 37
Table of Figures
Figure 1-1: High-Level Block Diagram _____________________________________________ 10
Figure 3-1: Dimensions ________________________________________________________ 19
Figure 3-2: Dimension Details for M.2 42mm length __________________________________ 20
Figure 3-3: Dimension Details for M.2 card edge_____________________________________ 21
Figure 3-4: Dimension Details for M.2 connector and notch ____________________________ 22
