Vinotemp VT-38 Bedienungsanleitung
A PROUD HERITAGE OF EXPERIENCE & QUALITY
OWNER’S MANUAL
Beverage/Wine Cooler
VT-38
3
3
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
Your Beverage/Wine Cooler
This unit can be used for Storage and/or Service. The unit has a glass
door and soft interior light that you can leave on to elegantly display your
wines or beverages.
Serving Wines
Storing wines at the proper temperature is important. To preserve them
as long as possible wine should be stored at approximately 55°F. The
chart below suggests the optimal serving temperature for the different
styles of wine.
°C °F Wine Style
19 66 Armagnac, Brandy, Cognac
18 64.5 Full Bodied Red wines, Shiraz
17 62 Tawny Port
15 59 Medium Bodied Red Wines
14 57 Amontillado Sherry
13 55.5 Light Bodied Red Wines
12 53.5 Full Bodied White Wines
11 52 Medium Bodied White Wines
10 50 Rosé, Light Bodied White Wines
9 48 Vintage Sparkling
8 53.5 Fino Sherry
7 44.5 Non Vintage Sparkling
WWW.VINOTEMP.COM
General Operating Instructions
Remove all external and internal packaging from your cooler. Be sure that
all parts have been included before discarding any packaging materials.
You may want to keep the box and packing materials for use at a later
date.
Upon receipt and inspection of unit, the supply cord must be replaced if it
is damaged. Contact our customer service at 1-800-777-8466 or
•Let the unit rest, UNPLUGGED for 24 hours once you have it placed
in your home.
•Please fully read the instruction manual.
Please read and follow all safety rules
and operating instructions before using.
5
5
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
TABLE OF CONTENTS
Parts And Specifications ............................................. 6
Important Safety Instructions ..................................... 7
Cord Instructions ...................................................... 8
Cooler Installation ..................................................... 8
Operating Instructions ............................................... 9
Temperature Control.................................................. 9
Rack Removal / Installation ...................................... 10
Cleaning And Care................................................... 11
Moving Your Cooler.................................................. 11
Troubleshooting ...................................................... 12
Terms Of Sale And Warranty..................................... 13
WWW.VINOTEMP.COM
PARTS AND SPECIFICATIONS
1. Double-pane window
2. Grill
3. Adjustable leveling legs
4. Shelf
5. Cabinet
6. Control Panel
7. LED Indicator
8. Temperature Adjustment
9. Light Switch
Type 2 Temp.
Item Number VT-38
Dimension (HxWxD) 34.3"×23.9"×22.6"
Weight 153.9 Lbs
Power Consumption 2.1 kW.h/24h
Cooling System R134a
Temperature Range (for Right Side) 48～65°F
Temperature Range (for Left Side) 40～65°F
Rated Voltage 115V
Rated Frequency 60Hz
Input Power 150W
7
7
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be followed
to reduce the risk of fire, electric shock, and personal injury.
1. Use this appliance only as described in this manual. Other users
are not recommended and may cause fire, electric shock or injury.
2. This product is intended for household use.
3. To protect against electric shock, do not immerse unit, plug or
cord in water or other liquids. Avoid locating the unit in moist
areas.
4. Keep away from children.
5. Unplug from the outlet when not in use, when moving from one
location to another, or before cleaning.
6. To disconnect the appliance, grip the plug and pull it from the wall
outlet. Never pull by the cord.
7. Do not operate the appliance in the presence of explosive and/or
flammable fumes.
8. Do not place the appliance or any of its parts near an open flame,
cooking or other heating appliance.
9. Do not operate the appliance with a damaged cord or plug. If the
product malfunctions, or if it is dropped or damaged in any
manner, do not use.
10. The use of attachments is not recommended and may be
hazardous.
11. Do not operate if the housing is removed or damaged.
12. A loose fit plug may cause overheating and a distortion of the plug.
Contact a qualified electrician to replace loose or worn outlet.
13. This appliance is designed to be built-in (fully recessed) or free
standing.
14. This cooler is intended for use in a controlled ambient location
such that the ambient temperature does not exceed 90°F (32°C)
and is not below 60°F (16°C).
15. Locate the unit away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect/alter the
outside color of the appliance.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the appliance from the power supply before
servicing.
WARNING: Risk of child entrapment. Before you throw away your old
cooler, take off the door and leave the shelves in place so that children
may not easily climb inside.
WWW.VINOTEMP.COM
CORD INSTRUCTIONS
For your protection, this unit is equipped with
a 3-conductor cord set that has a molded 3-
prong grounding-type plug, and should be
used in combination with a properly
connected grounding-type outlet as shown in
figure A.
It is not recommended to use this cooler with
an extension cord or power board. Please
ensure that the appliance is plugged directly
into the electrical outlet.
COOLER INSTALLATION
1. This cooler is designed to be built-in (fully recessed) or free standing.
2. Remove all exterior and interior packaging.
3. Place your cooler on a flat surface that is strong enough to support
the unit when fully loaded.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place heavy objects on top of the unit.
6. Do not place the unit next to a major appliance that emits large
amounts of heat, such as a dishwasher, microwave, oven, etc.
7. Unit is not designed for installation in a garage or basement.
8. Before connecting the appliance to the power source, let it stand
upright for approximately 24 hours. This will reduce the possibility of
a malfunction in the cooling system due to handing during
transportation.
9. Clean the interior surface with lukewarm water using a soft cloth
before first use. Be sure to wipe dry.
10. Do not plug unit into the same outlet as a refrigerator or microwave.
9
9
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
OPERATING INSTRUCTIONS
oPlug the power cord into a standard electrical outlet.
oGently place/slide the racks in the cooler.
oDetermine the best temperature setting to use.
oPlace bottles inside the cooler.
oLimit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
Important: When using the cooler for the first time, allow at least 24
hours for the internal temperature to adjust properly. Make sure there are
at least 3 to 5 bottles in the unit.
TEMPERATURE CONTROL
Important note: In order to operate efficiently, unit should be in
an environment with an ambient temperature of less than 90°F
(32°C).
Temperature Presets:
For your convenience, the cooler is programmed at storing temperature.
The temperature zone for the right side pre-set by the manufacturer is
54oF (12oC). The temperature zone for the left side pre-set by the
manufacturer is 45oF (7oC).
Setting the temperature control (manually):
You can manually adjust the temperature. Simply press the button on
the control panel to decrease the temperature and the button to
increase the temperature inside the cooler in 1° increments. The
temperature zone for the right side ranges from 48oF to 65oF (9oC-18oC).
The temperature zone on the left side ranges from 40oF to 65oF (4oC-
18oC). The variance between compartments can be no more than 18oF
(10 oC).
When the cabinet temperature is too low the LED will display “LL”. When
the temperature is too high it will display “HH”. The “ER” display shows
when there has been a power disruption.
Both sides of this unit can store wine or beverages, but the left side can
be set colder than the right side.
WWW.VINOTEMP.COM
RACK REMOVAL / INSTALLATION
To prevent damaging the door gasket, make sure to have the door
all the way opened when pulling shelves out of the rail
compartment.
1. Remove any bottles stored on the rack.
2. Grasp the rack, and gently pull it up, then take it out.
3. To reinstall, push the racks into track rails until it completely stops.
(See figure 1)
NOTE: Shelves are interchangeable, to store wine or beverage.
Inhaltsverzeichnis
Andere Vinotemp Weinkühler Handbücher
Vinotemp
Vinotemp WINE-MATE WM-4520SSH Bedienungsanleitung
Vinotemp
Vinotemp 3500HZD Bedienungsanleitung
Vinotemp
Vinotemp 2500SSR Bedienungsanleitung
Vinotemp
Vinotemp VT-48TS Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE WM-1500HZD Bedienungsanleitung
Vinotemp
Vinotemp Wine-Mate WM-6520SSV Bedienungsanleitung
Vinotemp
Vinotemp VT-BC32SB10 Bedienungsanleitung
Vinotemp
Vinotemp VT60 Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE VINO3500HZD Bedienungsanleitung
Vinotemp
Vinotemp Wine-Mate WM-1520SSW Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE WM-1500HTD Bedienungsanleitung
Vinotemp
Vinotemp VINCAVE 200 Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE WM-1500HTD Bedienungsanleitung
Vinotemp
Vinotemp 1500CD Bedienungsanleitung
Vinotemp
Vinotemp 4500DS Bedienungsanleitung
Vinotemp
Vinotemp TC32G Bedienungsanleitung
Vinotemp
Vinotemp VT-6TED-WB Bedienungsanleitung
Vinotemp
Vinotemp element EL-18TEDCS Bedienungsanleitung
Vinotemp
Vinotemp VT-15 TS Bedienungsanleitung
Vinotemp
Vinotemp V5LR 2009 Bedienungsanleitung
