Vinotemp VT-58 Bedienungsanleitung
A PROUD HERITAGE OF EXPERIENCE & QUALITY
Wine Cellar
VT-58 (58 bottle)
OWNER’S MANUAL
WWW.VINOTEMP.COM
2
WWW.VINOTEMP.COM
Your Wine Cellar
This unit can be used for Storage and/or Service. The unit has a glass
door and soft interior light that you can leave on to elegantly display your
wine.
Serving Wines
Storing wines at the proper temperature is important. To preserve them
as long as possible, wine should be stored at approximately 55°
Fahrenheit. However, the chart below suggests the optimal drinking
temperature for the different styles of wine.
°C °F Wine Style
19 66 Armagnac, Brandy, Cognac
18 64.5 Full Bodied Red wines, Shiraz
17 62 Tawny Port
15 59 Medium Bodied Red Wines
14 57 Amontillado Sherry
13 55.5 Light Bodied Red Wines
12 53.5 Full Bodied White Wines
11 52 Medium Bodied White Wines
10 50 Rosé, Light Bodied White Wines
9 48 Vintage Sparkling
8 53.5 Fino Sherry
7 44.5 Non Vintage Sparkling
3
17631 South Susana Road, Rancho Dominguez, California 90221
General Operating Instructions
Remove all external and internal packaging from your wine cellar. Be sure
that all parts have been included before discarding any packaging
materials. You may want to keep the box and packing materials for use at
a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it
is damaged. Contact our customer service at 1-800-777-8466 or
•Let the unit rest, UNPLUGGED for 24 hours once you have it placed
in your home.
•Please fully read the instruction manual.
•Save these instructions.
Please read and follow all safety rules
and operating instructions before using.
To register your product, visit:
http://www.vinotemp.com/Warranty.aspx
Register your warranty within 10 days of receiving the unit.
Please be sure to retain your proof of purchase.
4
WWW.VINOTEMP.COM
Table of Contents
Parts And Specifications ..........................................6
Important Safety Instructions ..................................6
Cord Instructions ...................................................8
Wine Cellar Installation ...........................................8
Temperature Control...............................................9
Reversal Of Door Swing.........................................10
Cleaning And Care................................................11
Moving Your Wine Cellar........................................11
Troubleshooting ...................................................12
Terms Of Sale And Warranty..................................13
Service & Important Notice....................................14
5
17631 South Susana Road, Rancho Dominguez, California 90221
PARTS AND SPECIFICATIONS
1. Double-Pane Window
2. Grill
3. Adjustable Leveling Legs
4. Shelf
5. Cabinet
6. PVC Control Panel
7. Temperature Adjustment Button
8. LED Temperature Indicator
9. Light Switch
Type 1 Temp.
Item Number VT-58
Bottle Capacity Approx. 58
Dimension (HxWxD) without handle 34.3"×23.9"×22.6"
Weight 105.8 Lbs
Power Consumption 2.5 kW.h/24h
Cooling System R134a
Ambient Temp. Range 60～90°F
Temperature Range 45～65°F
Rated Voltage 115V
Rated Frequency 60Hz
Input Power 200W
*Note: This wine cellar is designed to store standard Bordeaux 750 ml bottles. Storing
large and/or oddly shaped bottles (including champagne and sparkling wine bottles) will
decrease the capacity of your wine cellar.
6
WWW.VINOTEMP.COM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be followed
to reduce the risk of fire, electric shock, and personal injury.
1. Use this appliance only as described in this manual. Other uses are
not recommended and may cause fire, electric shock or injury.
2. This product is intended for household use.
3. To protect against electric shock, do not immerse unit, plug or
cord in water or other liquids. Avoid locating the unit in moist
areas.
4. Never allow children to operate, play with, or crawl inside the unit.
5. Unplug from the outlet when not in use, when moving from one
location to another, or before cleaning.
6. To disconnect the appliance, grip the plug and pull it from the wall
outlet. Never pull by the cord.
7. Do not operate the appliance in the presence of explosive and/or
flammable fumes.
8. Do not place the appliance or any of its parts near an open flame,
cooking or other heating appliance.
9. Do not operate the appliance with a damaged cord or plug. If the
product malfunctions, or if it is dropped or damaged in any
manner, do not use.
10. The use of attachments is not recommended and may be
hazardous.
11. Do not operate if the housing is removed or damaged.
12. A loose fit plug may cause overheating and a distortion of the plug.
Contact a qualified electrician to replace loose or worn outlet.
13. This appliance is designed to be built-in (fully recessed) or free
standing.
14. The wine cellar is intended for use in a controlled ambient location
such that the ambient temperature does not exceed 90°F (32°C).
15. Locate the unit away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect/alter the
outside color of the appliance.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the appliance from the power supply before
servicing.
WARNING: Risk of child entrapment. Before you throw away an old wine
cellar, take off the door and leave the shelves in place so that children
may not easily climb inside.
7
17631 South Susana Road, Rancho Dominguez, California 90221
8
WWW.VINOTEMP.COM
CORD INSTRUCTIONS
For your protection, this unit should be properly
grounded. Unit is equipped with a 3-conductor
cord set that has a molded 3-prong grounding-
type plug, and should be used in combination
with a properly connected grounding-type outlet
as shown in figure A.
It is not recommended to use this wine cellar
with an extension cord or power board. Please ensure that the appliance
is plugged directly into the electrical outlet.
WINE CELLAR INSTALLATION
•Remove the exterior and interior packaging before use.
•Check to be sure you have all of the parts, including an accessory kit
and 1 owner’s manual.
•Place your wine cellar on a flat, dry surface that is strong enough to
support the unit when fully loaded.
•This unit is designed to be built-in (fully recessed) or free standing.
•For freestanding installation, 6” of space at the back, 10-12” of space
on each side, and unlimited clearance at the top of the wine cooler are
suggested to ensure proper air circulation to cool the compressor and
condenser. Do not place underneath a table, counter top, or anything
of the sort as this will not allow for proper air circulation.
•Do not place heavy objects on top of the unit.
•Unit is not designed for installation in a garage or basement.
•Do not place the unit in direct sunlight or near sources of heat.
Extreme hot and cold ambient temperatures may cause the unit not to
perform properly or increase electrical consumption.
•Do not place the unit next to a major appliance that emits large
amounts of heat, such as a dishwasher, microwave, oven, etc.
•Do not plug unit into the same outlet as a refrigerator or microwave.
•Before connecting the appliance to the power source, let it stand
upright for approximately 24 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth
before first use.
OPERATING INSTRUCTIONS
1. Gently place/slide the racks in the wine cellar.
2. Determine the best temperature setting to use.
3. Place bottles inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
6. You can turn the interior light on and off by touching the button
labeled with a light on the front control panel.
7. If unit is equipped with a lock, insert provided key and turn to
operate lock. Make sure key is kept in a secure place when not in use.
Important: When using the wine cellar for the first time, allow at least
24 hours for the internal temperature to adjust properly. Make sure there
are at least 3 to 5 bottles in the unit.
TEMPERATURE CONTROL
Important: In order to operate efficiently, this product should be
in an environment with an ambient temperature of less than 90°F
(32°C).
Temperature preset:
For your convenience, the wine cellar is programmed at storing
temperature. The temperature pre-set by the manufacturer is 54°F
(12°C).
Setting the temperature:
You can manually adjust the temperature. Simply press the “- ”button
on the control panel to decrease the temperature and the “+ ”button to
increase the temperature by 1 degree inside the wine cellar. The
temperature range for this unit is from 45°F (7°C) to 65°F (18°C).
When the cabinet temperature is too low, the LED will display “LL”. When
the temperature is too high, it will display “HH”. The “ER” display shows
when there has been a power disruption.
9
17631 South Susana Road, Rancho Dominguez, California 90221
REVERSAL OF DOOR SWING
The door of the wine cellar could be opened either from the left or right
side. The wine cellar is installed to open from the left side.
To reverse, please do as follows:
1. Disconnect the power, take out all the wines and lay the wine cellar
back on the ground.
2. Remove the screw on the right downward hinge cover and remove
the right downward hinge cover.
3. Remove the screw on the right downward hinge and remove the right
downward hinge.
4. Remove the screw on the door support and remove the cover of door
support.
5. Remove the fixing screw on the door support and remove the door
support.
6. At this point, you will be able to remove the door.
7. Remove the fixing screw on the door handle, then remove the handle
and fix it on the right of the door.
8. Tear off the PVC cover of the top control panel.
9. Remove the five screws and take off the plastic panel.
10. Remove the upper door axis, axis jacket and install them to the left,
then tighten the screw.
11. Install the plastic panel and tighten the screws.
12. Recover the new PVC cover packed in the accessory kit.
13. Install the door.
14. Install the left downward hinge (in the accessory kit) and install the
right downward hinge cover.
15. Install the door support on the place of the right downward hinge and
then affix the cover.
16. You now have the door fully installed on your desired side.
Note: Please do not power up the unit for 48 hours to allow the coolants
to settle inside the compressor.
10
WWW.VINOTEMP.COM
Andere Handbücher für VT-58
2
Inhaltsverzeichnis
Andere Vinotemp Weinkühler Handbücher
Vinotemp
Vinotemp VT-32TS-FE Bedienungsanleitung
Vinotemp
Vinotemp VT-6TED-WB Bedienungsanleitung
Vinotemp
Vinotemp IL-OW002 Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE VINO1500HZD Bedienungsanleitung
Vinotemp
Vinotemp VT-6H Bedienungsanleitung
Vinotemp
Vinotemp VT-18TEDS Bedienungsanleitung
Vinotemp
Vinotemp VT-6TEDS Bedienungsanleitung
Vinotemp
Vinotemp VT-34-2Z Bedienungsanleitung
Vinotemp
Vinotemp 2500SSR Bedienungsanleitung
Vinotemp
Vinotemp VT-188 Bedienungsanleitung
Vinotemp
Vinotemp VT-34 TS Bedienungsanleitung
Vinotemp
Vinotemp VT-48TEDS-2Z Bedienungsanleitung
Vinotemp
Vinotemp VT-165TSRV Bedienungsanleitung
Vinotemp
Vinotemp 1500SSW Bedienungsanleitung
Vinotemp
Vinotemp VT-15 TS Bedienungsanleitung
Vinotemp
Vinotemp VinoCave Series Bedienungsanleitung
Vinotemp
Vinotemp Wine-Mate WM-2520SSW Installationsanleitung
Vinotemp
Vinotemp Wine-Mate WM-2500SSDWC Bedienungsanleitung
Vinotemp
Vinotemp WINE-MATE WM-1500HZD Bedienungsanleitung
Vinotemp
Vinotemp VT-12TSMD-2Z Bedienungsanleitung
