Viola Systems Arctic AMR Bedienungsanleitung
Arctic AMR Hardware Manual
Arctic AMR Hardware Manual (2170)
Firmware Version 1.x
Document Version 1.1
December 2010
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 2 Document Version 1.1
Copyright and Trademark
Copyright © 2008-2010, Viola Systems Ltd. All rights to this manual are owned
solely by Viola Systems Ltd. (referred elsewhere in this User’s Manual as
Viola Systems). All rights reserved. No part of this manual may be transmitted
or reproduced in any form or by any means without a prior written permission
from Viola Systems.
Ethernet™ is a trademark of XEROX Corporation. Windows™ and Internet
Explorer™ are trademarks of Microsoft Corporation. Netscape™ is a
trademark of Netscape Communications Corporation. All other product names
mentioned in this manual are the property of their respective owners, whose
rights regarding the trademarks are acknowledged.
Viola Systems Ltd.
Lemminkäisenkatu 14-18 A
FI-20520 Turku
Finland
E-mail: [email protected]
Technical Support
Phone: +358 20 1226 226
Fax: +358 20 1226 220
E-mail: [email protected]
Internet: http://www.violasystems.com
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 3 Document Version 1.1
Disclaimer
Viola Systems reserves the right to change the technical specifications
or functions of its products or to discontinue the manufacture of any of its
products or to discontinue the support of any of its products without any
written announcement and urges its customers to ensure that the information
at their disposal is valid.
Viola software and programs are delivered “as is”. The manufacturer does not
grant any kind of warranty including guarantees on suitability and applicability
to a certain application. Under no circumstance is the manufacturer or the
developer of a program responsible for any damage possibly caused by the
use of a program. The names of the programs as well as all copyrights relating
to the programs are the sole property of Viola Systems. Any transfer, licensing
to a third party, leasing, renting, transportation, copying, editing, translating,
modifying into another programming language or reverse engineering for any
intent is forbidden without the written consent of Viola Systems.
Viola Systems has attempted to verify that the information in this manual is
correct with regard to the state of products and software on the publication
date of the manual. We assume no responsibility for possible errors which
may appear in this manual. Information in this manual may change without
prior notice from Viola Systems.
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 4 Document Version 1.1
Declaration of Conformity
(according to ISO/IEC Guide 22 and EN 45014)
Manufacturer’s Name: Viola Systems Ltd.
Manufacturer’s Address:
Lemminkäisenkatu 14-18 A
FI-20520 Turku
Finland
declares that this product:
Product Name:
Arctic AMR
conforms to the following standards:
EMC:
EN 55022 Emission Test (Class A)
1. Radiated Emissions (30-1000MHz)
2. Conducted Emissions (0.15-30MHz)
EN 50082-1 Immunity Test
1. IEC 801-3: Radio Frequency Electromagnetic Field
2. IEC 801-2: Electrostatic Discharge
3. IEC 801-4: Fast Transients, AC Power Ports and Signal cables
Supplementary Information:
“The product complies with the requirements of the Low Voltage Directive
73/23/EEC and EMC directive 89/336/EEC.”
Warning!
This is a Class A product. In a domestic environment this product may cause
radio Interference which may make it necessary for the user to take adequate
measures.
Manufacturer’s Contact Information:
Viola Systems Ltd.
Lemminkäisenkatu 14-18 A
FI-20520 Turku
Finland
Phone: +358 20 1226 226
Fax: +358 20 1226 220
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 5 Document Version 1.1
Warranty and Safety Instructions
Read these safety instructions carefully before using the products mentioned
in this manual:
Warranty will be void if the product is used in any way in contradiction with the
instructions given in this manual or if the product has been tampered with.
The devices mentioned in this manual are to be used only according to the
instructions described in this manual. Faultless and safe operation of the
devices can be guaranteed only if the transport, storage, operation and
handling of the devices is appropriate. This also applies to the maintenance of
the products.
To prevent damage both the product and any terminal devices must always
be switched OFF before connecting or disconnecting any cables. It should
be ascertained that different devices used have the same ground potential.
Before connecting any power cables the output voltage of the power supply
should be checked.
This product is not fault-tolerant and is not designed, manufactured
or intended for use or resale as on-line control equipment or as part
of such equipment in any hazardous environment requiring fail- safe
performance, such as in the operation of nuclear facilities, aircraft navigation
or communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of Viola Systems manufactured
hardware or software could lead directly to death, personal injury, or severe
physical or environmental damage.
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 6 Document Version 1.1
Revisions
Date Document
Version Firmware
Version Description of changes
12/2010 1.1 1.x Cable shield images added.
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 7 Document Version 1.1
Contents
COPYRIGHT AND TRADEMARK ........................................................................................2
DISCLAIMER..........................................................................................................................3
DECLARATION OF CONFORMITY......................................................................................4
WARRANTY AND SAFETY INSTRUCTIONS.......................................................................5
REVISIONS............................................................................................................................6
1. INTRODUCTION............................................................................................................... 8
1.1 Safety Operation................................................................................................................... 8
2. HARDWARE......................................................................................................................9
2.1 Power supply.........................................................................................................................9
2.2 Antenna connector.............................................................................................................. 10
2.3 System status LEDs............................................................................................................10
2.4 Serial port............................................................................................................................10
2.5 Device identification and product label ..............................................................................11
3. INSTALLING THE DEVICE.............................................................................................12
3.1 Unpacking the device..........................................................................................................12
3.2 Installing SIM card...............................................................................................................12
3.3 Connecting power cable......................................................................................................15
3.4 Mounting the back panel.....................................................................................................17
3.5 Mounting the device............................................................................................................18
4. SPECIFICATIONS ..........................................................................................................19
5. LIMITED WARRANTY.....................................................................................................20
6. TECHNICAL SUPPORT ................................................................................................ 21
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 8 Document Version 1.1
1 Introduction
Arctic AMR is an intelligent GPRS modem device for AMR connectivity. The
device has an integrated 1/3 phase AC power supply and GPRS connectivity.
Intended audience for this manual are engineers and technical staff planning
and commissioning the devices to field operations.
1.1 Safety Operation
Warning!
The device uses lethal voltages. Carefully read through all the instructions
in this manual and follow local safety regulations. Device must not be
operated when back panel is removed. Voltage inside the device is extremely
dangerous and may cause death or severe injury.
Warning!
Do not touch the integrated circuits on the circuit board. Static voltage
discharge may damage the components.
Carefully read through all the instructions in this manual before installing or
operating the device.
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 9 Document Version 1.1
2 Hardware
This section describes the physical interfaces on Arctic AMR.
The device has four external interfaces:
1. Power supply
2. Serial port (RS-232)
3. Antenna connector (SMA)
4. System status LEDs
Figure 1. Physical Interface
2.1 Power supply
Arctic AMR operates with external AC power. The power supply can be used
in 1 or 3 phase configuration.
Table 1: Power supply range
Voltage range
Phase - Phase 90-440 VAC
Phase - N 52-254 VAC
Power cable installation is described in the chapter Connecting power cable
on page 15. Recommended power cabling is (conductor) 0.5mm2to
2.5mm2.
Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x 10 Document Version 1.1
Note!
External fuses are required for each phase line to protect the device. The fuse
with a rating not greater than 2A is recommended. All the connections to the
power connector (phase and neutral) must be connected via all-pole safety
switch.
2.2 Antenna connector
The device has an SMA (female) connector. The antenna has an SMA male
connector.
2.3 System status LEDs
The device has 5 system status LEDs. When the system is fully operational,
all LEDS should be on.
Table 2: LEDs Status
No. Legend LED name Description (LED ON)
1 POW POWER Device has AC power and it's operational
2 RUN RUN Device SW is running OK
3 SIG SIGNAL GPRS signal level is OK
4 NET NETWORK GPRS is registered successfully to network
5 MET METER Meter connected to device successfully and serial
port is polling
2.4 Serial port
The serial port connector is a 9-pin D-sub (female) connector supporting serial
speeds from 300 to 115200 bps.
Serial port signals and pin connections are listed in table 3:
Table 3: Serial Port Pin Connection
Number Name Explanation
1 DCD Data Carrier Detect
2 RXD Received Data
3 TXD Transmitted Data
4 DTR Data Terminal Ready. Handshake output
5 GND Signal ground
6 DSR DSR
7 RTS Ready To Send. Handshake output
8 CTS Clear To Send. Handshake input
9 RI Ring Indicator
Inhaltsverzeichnis
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung