Vipe NITRO X3 Bedienungsanleitung
USER MANUAL
Bluetooth Music System
NITRO X3 I X3 Pro
EN
Operating and safety regulations
Thank you for purchasing Vipe audio system!
Please read the entire manual carefully before use, paying
particular attention to "Operating and safety instructions" section,
and then retain the manual for future reference.
• Follow all safety and operating instructions when using
this product.
• Keep the instructions in a safe place!
• You should keep the safety and operating instructions for future
reference.
• Follow the warning instructions!
• You should strictly follow all warnings provided on the product
and listed in the operating instructions.
Clean only with a dry cloth!
Unplug the mains adapter of this device from the mains
socket before cleaning this product. Never use liquid cleaning
detergents or cleaning sprays. Use only a damp cloth
for cleaning.
Do not use this device near water
The device should never be exposed to water droplets or water
splashes, such as those found near a bathtub, wash basin,
kitchen sink, washing machine, wet basement or swimming
pool. Never place containers lled with liquids, such as e.g.
ower vases, on the device.
Ventilation
Slots and openings in the housing are used to ventilate the
device to ensure reliable operation of the device and to protect
the device from overheating and possible auto ignition. Do not
block the ventilation holes. Install the device according to the
manufacturer's instructions. Never block the ventilation holes by
placing the device on a bed, sofa, rug, or similar soft surfaces.
This device should not be installed in a bookshelf or built-in
wardrobe unless adequate ventilation is ensured.
Overload
Never overload mains sockets, extension cords or multiple
sockets, otherwise there is a risk of re or electric shock.
Maintenance
Never attempt to carry out the maintenance of this device
yourself, because live parts can be exposed through the
openings or by removing covers, contacting which can be
hazardous. Leave all maintenance work to qualied service
personnel.
Damage requiring repair
Maintenance and repair work should only be carried out by
a qualied customer service.
Maintenance/repair is required if the device has been damaged
if liquid has entered the device, if objects have entered the
device, if the device has been exposed to rain or moisture,
when it stops working properly or has fallen down.
Heat
Do not install the device near hot surfaces, such as radiators,
fan heaters, stoves or other devices (including ampliers)
that can be hot. Never place objects with open ame, such
as candles or lanterns, on or near the device. The installed
batteries should not be exposed to excessive heat such
as direct sunlight, re or the like.
Battery and accumulator
If you do not use the device for a month or more, remove the
battery from the battery compartment of the remote control
to prevent leakage. Immediately dispose of leaking batteries
properly and observe all legal regulations. Leaking batteries
can cause injury and damage the device.To minimize the risk of
electric shock, re, etc.
Caution:
Important for laser products (class 1)
Do not open the casing (Besides of accessing the
compartment for the accumululator)
The device contains no user serviceable parts;
Maintenance should only be carried out by qualied
personnel. Open the compartment for the
accumulator only in case of switched of and
completely disconnected from the mains power grid.
Carefully unpack the device and make sure all accessories
are present:
- Operating instructions
- Remote Control
- Power cord
- FM antenna
- OTG & USB adapter
The remote control
• Insert AAA/1.5V battery into the remote control, observing
the correct polarity (+ and -).
• If the range of the remote control decreases, replace the old
battery with a new one.
• Exposing the remote control sensor to direct sunlight or high
frequency uorescent light may cause malfunction. In such
cases, you should move the system to a dierent location
to avoid such malfunction.
Remote control
User Manual
Remote control
Power cable
FM-antenna
Parts of a single order
1 pcs.
1 pcs.
1 pcs.
1 pcs.
This product meets all required European and Russian
safety and EMC standards.
Certication
Specications
Model No.: vipe NITRO X3
Speakers: Woofer 30W 5.25'' x 2 + Tweeter 10W 1'' x 2
Power (RMS and THD %): 60W (10% THD)
Peak power: 600 W
Color: Black
Power supply: 100 V - 240 V / 50/60 Hz
Power cable: AC Power Cable (1.5 m)
Frequency response: 40 Hz - 18 kHz (-6 dB)
Signal-to-noise ratio: > 80 dB ±3db
Battery type: Li-ion battery (11.1V 4400MAH)
Battery charge time: 6 hours
Music play time: Up to 12 hours
USB format: FAT16, FAT32
USB le format: mp3, wma, wav, ac
Type-C charge out: 5 V / 1 A
Bluetooth®version: V5.0
Bluetooth® prole: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2.4GHz
(2402MHz~2480MHz)
Dimensions (W x H x D): 260 x 257 x 510 mm
Outer carton (W x H x D): 295 x 330 x 545 mm
Gross Weight: TBC
Net weight: TBC
Model No.: vipe NITRO X3 Pro
Speakers: Woofer 30W 5.25'' x 2 + Tweeter 10W 1'' x 2
Power (RMS and THD %): 60W (10% THD)
Peak power: 600 W
Color: Black
Power supply: 100 V - 240 V / 50/60 Hz
Power cable: AC Power Cable (1.5 m)
Frequency response: 40 Hz - 18 kHz (-6 dB)
Signal-to-noise ratio: > 80 dB ±3db
Battery type: Li-ion battery (11.1V 4400MAH)
Battery charge time: 6 hours
Music play time: Up to 10 hours
USB format: FAT16, FAT32
USB le format: mp3, wma, wav, ac
Type-C charge out: 5 V / 1 A
Bluetooth®version: V5.0
Bluetooth® prole: A2DP 1.3, AVRCP 1.6
Bluetooth®transmitter frequency range: 2.4GHz
(2402MHz~2480MHz)
Dimensions (W x H x D): 260 x 257 x 510 mm
Outer carton (W x H x D): 295 x 330 x 545 mm
Gross Weight: TBC
Net weight: TBC
Device overview
Fig.2Fig.1
1
27
9
8
11
10
12
13
3
4
5
6
1 2
8 9 10 11 12
3 4 5 6 7
Control panel (g.1)
1. MIC VOLUME
• Adjust the MIC volume value of the speaker
2. ECHO VOLUME
• Adjust the echo volume value of the speaker
3. MODE/ Voice prompt on/o
• Short press: Select Bluetooth, LINE IN, Radio or USB mode
• Long press: Voice prompt on/o
4. PLAY/PLAUSE/TWS
• Short press: Play/plause mode (FM station search with
automatic storage)
• Long press: TWS connection in bluetooth mode
5. NEXT/NITRO BASS
• Short press: Skip to the next track (Next FM channel in FM
mode)
• Long press: Nitro Bass
6. BASS VOLUME
• Adjust the bass volume value of the speaker
7. VOLUME
• Adjust the volume value of the speaker
8. GUITAR VOLUME
• Adjust the guitar volume value of the speaker
9. POWER ON/OFF
• Short press: Standby mode
• Long press: Power on/o the device
10. LIGHT
• Short press: Select light color change (6 colors and Auto
color)
• Long press: Select lighting mode (3 modes: Flashing, Racing
and Breathing)
11. PREVIOUS/STROBE ON/OFF
• Short press: Skip to the previous track (Previous FM channel
in FM mode)
• Long press: Strobe ashing LED on/o and front LED on/o
12. TREBLE VOLUME
• Adjust the treble volume value of the speaker
1. POWER ON/OFF
• Short press: Standby mode
• Long press: Power o the device
2. TWS
• Short press: TWS connection in bluetooth mode
• Long press: Strobe ashing light on/o
3. PREVIOUS
• Short press: Skip to the previous track
• Long press: Fast backward (FM station search in FM mode)
4. BASS
• Short press: Select Bass on/o
• Long press: Select echo mode
5. EQ
• Short press: Change the equalizer mode (8 modes)
• Long press: Select repeat one track /List cycle mode
6. NITRO BASS
• Short press: Press to a strong nitro bass
• Long press: Active voice prompts
7. MODE
• Short press: Select Bluetooth, LINE IN, Radio or USB mode
• Long press: LED on/o (circle light in front)
• Long press 15 sec: Check Bluetooth version
8. VOLUME UP
• Short press: Adjust the volume value of the speaker
• To adjust the volume value of the echo/ MIC when in echo/
MIC mode
9. PLAY/PLAUSE
• Short press: Play/plause mode (FM station search with
automatic storage in FM mode)
• Long press: Microphone priority in BT, USB, AUX-IN mode.
10. NEXT
• Short press: Skip to the next track
• Long press: Fast forward (FM station search in FM mode)
11.VOLUME DOWN
• Short press: Adjust the volume value of the speaker
• Adjust the volume value of the echo/ MIC when in echo/ MIC
mode.
12.TREBLE
• Short press: To select Treble on/o
• Long press: To select MIC mode, then press VOL± to turn up/
down mic volume
13. Light
• Short press: Select light color change (6 colors and Auto color)
for circle light in front
• Long press: Select lighting mode (3 modes: Flashing, Racing
and Breathing)
Remote control (RC) (g. 2)
1 6
2 7
3 8
49
5
Fig.3
Device overview
Dieses Handbuch passt für folgende Modelle
1
Andere Vipe Stereoanlage Handbücher
