Virax Micro Visioval 294200 Bedienungsanleitung

Original operating manual

User

manual

Read carefully and keep safe for future reference

5 in 1 camera

Micro Visioval® Ref. 294200

5 in 1 camera

WW-ABS-20/18

09/2018

K620258

Scope of delivery / parts list..................................................................................................................4

General...........................................................................................................................................................................6

Read and keep the user manual carefully .............................................................................6

Symbols used in this manual...............................................................................................................6

Safety................................................................................................................................................................................8

Proper use..............................................................................................................................................................8

Residual risk.........................................................................................................................................................9

General safety instructions.....................................................................................................................9

Safety warnings for batteries................................................................................................................10

Proper use of the camera........................................................................................................................11

Before Use..................................................................................................................................................................12

Check the inspection camera and scope of delivery....................................................12

Inserting / replacing the batteries.....................................................................................................13

Mounting / removing the tripod...........................................................................................................14

Coiling / uncoiling the flexible shaft................................................................................................14

Usage - General applications...............................................................................................................15

Switching the inspection camera on / off..................................................................................15

Switching the LED work light on / off............................................................................................16

Switching the laser pointer ON / OFF..........................................................................................17

Selecting the mode........................................................................................................................................17

Mounting / removing the inspection attachments............................................................18

Table of contents

Usage - Camera recording.......................................................................................................................19

Switching the LED camera light on / off....................................................................................19

Zooming....................................................................................................................................................................20

Setting the display alignment...............................................................................................................21

Adjusting background brightness.....................................................................................................21

Colour change.....................................................................................................................................................22

Freezing images...............................................................................................................................................22

Seeing images....................................................................................................................................................23

Deleting images.................................................................................................................................................23

Transferring images ......................................................................................................................................23

Usage - Distance measurement.........................................................................................................24

Usage - Temperature measurement..............................................................................................26

Maintenance, cleaning, storage and transport................................................................28

Maintenance.........................................................................................................................................................28

Cleaning....................................................................................................................................................................28

Storage.......................................................................................................................................................................29

Transport..................................................................................................................................................................29

Troubleshooting...................................................................................................................................................30

Technical data........................................................................................................................................................31

Recycling ....................................................................................................................................................................32

Disposal of packaging.................................................................................................................................32

Disposal of inspection camera ........................................................................................................32

Declaration of conformity.........................................................................................................................32

Scope of delivery / parts list

1. Front housing part

2. Rear housing part

3. "LED light / laser pointer"

function switch

4. "Delete / alignment" function

switch

5. "Play / display brightness"

function switch

6. Flexible shaft

7. "Zoom / UP" function switch

8. "LED brightness / DOWN"

function switch

9. "On / Off" function switch

10. 1.5 V batteries, type LR6 / AA

11. Carry bag

12. USB cable

13. Inspection attachment

14. Double hook attachment

15. Magnetic attachment

16. Mirror attachment

17. Battery compartment cover

18. Tripod

19. Battery compartment

20. "Temperature measurement"

selection switch

21. USB Port

22. "Camera recording" selection

switch

23. "Distance measurement"

selection switch

24. LED camera light

25. LED work light

26. Laser pointer

27. Flexible shaft outlet

28. Red indicator light

29. Display

Scope of delivery / parts list

111213141516

General

Read and keep the user manual carefully

This operating manual is an integral part of this 5-in-1 multi-function

camera (hereafter referred to only as "inspection camera"). It contains

important information on safety, usage and maintenance. Please read

the operating manual carefully before using the inspection camera. Pay

particular attention to the safety instructions and warnings. Failure to follow

the instructions given in this manual may result in serious injury or damage

to the inspection camera. Always include the manual when you give the

inspection camera to others. Keep this manual in a safe place for future

reference.

The following symbols and key words will be used in this manual, on the

inspection camera or the packaging.

Indicates a hazardous situation that, if not

avoided, could result in death or serious injury.

Signals a hazard that can cause injuries when

ignored.

Warns against possible damages.

This symbol refers to useful information on

assembly or usage.

Products marked with this symbol comply with

all applicable regulations of the European

economic area.

Read the operating manual.

DC Voltage.

Symbols used in this manual

WARNING!

NOTICE!

CAUTION!

General

Indicates the brightness of the LED camera light 24

in 7 levels (the dots next to the symbols indicate the

respective level).

Indicates the brightness of the display 29 in 7 levels

(the number next to the symbol indicates the respective

level).

Indicates the orientation of the display at 0°.

Indicates the orientation of the display at 180°.

Indicates the orientation of the display at 180°

(mirrored).

Indicates the orientation of the display at 0° (mirrored).

Indicates the (consecutive) number of the displayed

image in relation to the number of stored images.

Indicates the magnification factor ( "Zoom") in 4 levels

(the number next to the symbol indicates the respective

level).

Indicates the available battery power in 5 levels (the

number of bars shown in the battery symbol indicates

the respective level).

Indicates insufficient battery power and prompts for

immediate replacement of the batteries.

Explanations of symbols

The model name is a combination of letters and numbers:

Micro Visioval®Ref. 294200

029/100

Safety

The inspection camera is intended for private and DIY use only for the

following purposes:

- for visual examination, inspection and troubleshooting on disconnected

systems and equipment.

- for measuring the distance to fixed objects easily;

- for contactless measurement of surface temperature.

Any other use is expressly prohibited and is considered as misuse. The

manufacturer cannot be held responsible for damage or injury caused by

misuse of the product. Examples of misuse are given in the following non-

exhaustive list:

- Using unsuitable accessories

- Using non-original spare parts.

- Incorrect operation or misuse.

- Non-observance of the operating manual.

- Repairs performed by unauthorised third party workshops.

- Power cuts or faults caused by non-observance of electrical regulations.

- Use and maintenance of the inspection camera by someone who is not

familiar with the inspection camera and/or who lacks suitable experience.

- Commercial, non-industrial or industrial use of the inspection camera.

Use the accessories according to these instructions. Failure to follow the

instructions given in this user manual may result in serious injuries and loss

of warranty. Comply with applicable local or national regulations concerning

the use of this inspection camera. Do not make any modifications to the

inspection camera. Any modification to the inspection camera may be

dangerous and is prohibited.

Proper use

Safety

General safety instructions

WARNING!

Read the warnings and safety instructions carefully. Failure to

follow the warnings and safety instructions may result in electric

shock, fire and/or serious injuries.

a) Never use the camera on people or animals.

The camera is

not a medical device.

b) Take appropriate protective measures for the area to be

inspected.

Drains and waste pipes may contain matter or

chemicals which may be poisonous, infectious or corrosive.

c) Wear appropriate personal protective equipment such as

safety gloves, safety goggles or safety mask, respirator or

face shield.

d) To reduce the risk of contamination or infection through

germs and pathogens,

never eat, drink or smoke when

operating the camera.

e) Wash your hands and other exposed body parts thoroughly

with hot soapy water after using the camera to inspect areas

exposed to waste, chemicals or bacteria.

f) Rinse the device’s shaft thoroughly after use.

Improper or negligent use can cause serious injuries.

h) Do not look directly into the LED light of the camera head,

as this can cause glare or eye damages.

Residual risk

Residual risks cannot be completely ruled out even in case of proper use.

Due to the nature of the inspection camera, the following risks may arise:

- Health hazards as a result of working with toxic or harmful materials

(e.g. asbestos).

Safety

i) Do not use the camera in areas with live parts.

You may get

an electric shock.

Before starting the work, make sure that all

the circuits in the work area are switched off and secured

against accidental switching on.

j) Do not use the camera in areas where it may come into

contact with moving parts.

If the flexible shaft gets caught in

moving parts, it may result in damage or injury.

Before starting

the work, make sure that all the machines in the work area

are switched off and secured against accidental starting.

k) Do not use the camera in potentially explosive areas (e.g.

fuel or gas tanks),

as the static discharge can lead to an

explosion.

l) Keep children away from the camera and the attachments.

Safety warnings for batteries

CAUTION!

Batteries may contain flammable substances. If batteries are not

handled properly, they may leak, become hot, catch fire or explode

under certain circumstances. This may cause serious injuries.

a) Do not expose the batteries and the camera to extreme

conditions, like radiators or direct sunlight.

b) Never attempt to charge non-rechargeable batteries.

c) Batteries should not be reactivated using other means,

taken apart, thrown into a fire or shorted.

d) Keep the batteries out of reach of children. If children

or pets swallow the battery, seek medical attention

immediately.

e) Avoid battery fluid from coming into contact with the skin,

eyes and mucous membranes. If they come into contact

with battery fluid, rinse the affected area with clean water

and seek medical attention immediately.

Inhaltsverzeichnis

Andere Virax Digitalkamera Handbücher

Virax

Virax VISIOVAL VX Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung