Virgo VRG22PL Bedienungsanleitung
USER MANUAL
VRG14PL / VRG22PL
this product is certified:
IMPORTANT: Please keep the original packaging in
case you need to return the material. If we receive the
system in non-original packaging, the warranty will be
void.
IMPORTANT:The latest version of the VIRGO software
is available on our websites
or ,section “Download”.
I N D E X
.....................................................................page 3
.....................................................................................page 5
....................................page 6
...............................................................................page 8
.........................................page 8
.................................................................................page 9
................................................page 10
.................page 11
.............................................................page 13
................................................................................page 13
.....................................page 13
.............................................................................................page 14
........................................................................................page 15
...........................................................................................page 20
...................................................................................page 20
.............................................................................page 21
........................page 22
.................................................................page 22
................................................................................page 20
...............................................................................page 23
....................................................................page 23
....................................page 23
...................................................................................................page 26
........................................................................page 26
................................................................................page 27
.................................................................................page 28
..............................................................................page 30
...................................................................page 30
....................................................................page 31
...........................................................................................page 32
How to install the cutting plotter
System requirements
How to load and operate with the lamination module
How to adjust the clutch
How to load the laminated media into the plotter
How to run the cut test
How to load the matrix remover core holder
How to load the rewinder core holder and set the slitter module
How to add or remove blade holder
Metal guides alignment
Remove unwanted waste from the edge of the roll
VIRGO CUTTING MANAGER
User interface
Advanced options
Error Messages
Black-mark detection
Black-mark position in the media
How to cut blank labels
How to update software
How to restore plotter settings
When and how to reduce the plotter feeding speed
Media path
Ultrasonic sensor calibration
Modules speed rotation
Graphtech mantenaice
How to replace the knife
How to replace the slitter blade
How to replace the cutting mat
Troubleshooting
2
HOW TO INSTALL THE CUTTING PLOTTER
1. Click on “SetupVirgoCM...” and follow
the step by step instructions to complete
the installation.
Please DO NOT connect the Virgo USB
to your pc before the installation is
complete
2. Click NEXT 3. Click NEXT
4. Click YES 5. In process
3
6. Click NEXT 7. Click FINISH
4
8. Click OK 9. Click NEXT (Remove the Virgo USB
from your pc, and turn o the Virgo)
10. Click NEXT 11. Choose the right model name of your
graphtec.
DO NOT CONFUSE “Graphtec CE6000”
WITH “Graphtec CE6000Plus”.
Click NEXT
12. Wait until the sign “Update for
the Graphtec CE6000 driver was
completed” shows up. You may need to
restart the computer.
Click OK
The installation is completed. A VirgoCM shortcut is displayed on your desktop
5
Plug in the USB camera and the USB dongle, they will auto-install.
If your computer already has a camera installed, we recommend disabling it. If you
do not, your pc will ignore the camera on the plotter.
CM Software will generate a folder in the Windows start menu.
If the USB dongle is not installed correctly
or is unplugged, the following error will
appear.
The cutting manager works on windows
OS from vista. We do not guarantee its
functionality on windows XP.
panel.
SYSTEM REQUIREMENTS
IMPORTANT:
connecting the unit.
Load the printed roll against the disk.
Tighten the core holder.
Load the lamination roll, move it along
the supply shaft and make it match with
the web, tighten the core holder.
IMPORTANT: the lamination roll always
needs to be narrower than the web width.
6
HOW TO LOAD AND OPERATE THE LAMINATION MODULE
BEFORE STARTING:
For standard application, it is recommend to
keep always selected the value “1”, increase
the clutch force only if it is required higher
tension on the media. When the clutch is active
the green led will be on.
In the case the lamination is not required, keep
the clutch disabled. The red led will be on.
Load the media into the nip rollers.
Lamination
Clutch Selector
Unwinder
Clutch Selector
pull it underneath the guide roller, center it
Push “On-O” button to active the automatic media feeding mood. The green led will be
on.
The error occurs when the media roll, lamination roll or both are not loaded, broken or
simply they are run out.
To clear the error it is just necessary to restart the module pushing “On-O” Button.
7
media feeding is active. It operates
keeping pushed “Forward Media”
button.
While using the knob, please adjust the
pressure on the rollers in order for the
and avoid any possible air bubbles.
We recommend the middle hole
position, as show in the picture.
adjustments. If the tension is too tight, the roller system may be damaged; if the tension
is too loose, the media will not be laminated properly.
Pull the laminated media under the tension arm, then pass it between the aluminium
rollers. The guide can be adjusted to prevent the media from shifting.
Put the lever, located in the rear of the plotter, in the down position.
Pull the media through the plotter, keeping the media edge in contact with the alignment
points.
Set both pinch rollers at about 2mm from the media edge.
8
WHEN TO ADJUST THE CLUTCH
HOW TO LOAD THE LAMINATED MEDIA INTO THE PLOTTER
While holding the media in the aligned position with one hand, lift the handle on the rear
of the plotter with the other to secure the media.
Press button 2 as requested on plotter’s display.
9
>> How to run the black-mark mode
User Interface at page 14 might be helpful.
1. Open Virgo Cutting Manager.
2. Press “OPEN PDF” or “OPEN LAST JOB” to load the Cut File.
3. Look at the camera preview, hold down “BACKWARD MEDIA” or “FORWARD MEDIA”
arrows to move the web until the black-mark goes in the center position of the blue
rectangle area.
black-mark, key in this value in the “DISTANCE BETWEEN BLACKMARKS” box section.
6. Press “CUT TEST” to check for cut depth. If the liner has been cut, decrease the cutter
pressure value in the cut force box. If label doesn’t detach, increase the cutter pressure
value in the cut force box.
7. Make sure label is aligned with the cut. Through X and Y values in the software,
HOW TO RUN THE CUT TEST AND START A JOB
++
8. Once the cut settings are properly set, select “COPY MODE” ON if you desire a preset
quantity of copies or OFF if to cut until the media roll is empty.
9. Set the black-mark size” in “BLACK-MARK MODE” area.
10. Press “START”.
IMPORTANT:
Whenever you lower and rise the lever while you are in black-mark
mode, hold down the forward media arrow button to move again the
plotter’s head down
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
