INTRODUCTION
-11-
Before using the device, read this Service Manual and keep it for future use. In case something written herein is unclear,
please contact the seller. Installation and commissioning of the equipment by the customer are possible if the installer has
basic knowledge of electrical systems and the use of proper tools. Nevertheless, the device installation by qualified
personnel is recommended.
The manufacturer is not responsible for any damage that can result from improper device installation or
operation. Any repair or modification carried out by yourselves results in loss of guarantee.
In view of the fact that the technical data are subject to continuous modifications, the manufacturer reserves a right to make
changes to the product characteristics and to introduce different constructional solutions without deterioration of the
product parameters or functional quality.
Additional information about ORNO products are available at www.orno.pl. Orno-Logistic Sp. z o.o. holds no responsibility
for the results of non-compliance with the provisions of the present Manual. Orno Logistic Sp. z o.o. reserves the right to
make changes to the Manual - the latest version of the Manual can be downloaded from www.orno.pl. Any
translation/interpretation rights and copyright in relation to this Manual are reserved.
1. Disconnect the power supply before performing any activities.
2. Do not immerse the product in water or other liquids.
3. Do not operate the device with damaged housing.
4. Do not open or repair the device yourself.
5. Do not use the device contrary to its dedication.
6. Do not install the monitor near devices that emit strong magnetic fields such as TV sets or speakers.
7. Do not install the monitor in a location subject to high humidity, vibration, shock or strong sunlight.
8. Turn off the power if there are "abnormal" sounds coming from the device.
9. After installation and mounting, remove the protective foil from the monitor screen.
It is forbidden to make connections to live devices!
Failure to comply with the above recommendations may result in permanent damage to the device.
WARNING
All dirt and dust should be removed with a soft and slightly moist cloth with gentle cleansers for plastic.
Do not use detergents that contain dissolvents, petrol, etc. and any other abrasive substances.
CLEANING AND MAINTENANCE
Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for
humans and the environment, due to the presence of hazardous substances, mixtures and components in the
equipment. On the other hand, used equipment is valuable material from which we can recover raw materials such as
copper, tin, glass, iron and others. The weee sign placed on the equipment, packaging or documents attached to it
indicates the need for selective collection of waste electrical and electronic equipment. Products so marked, under
penalty of fine, cannot be thrown into ordinary garbage along with other waste.
The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility
of the user to hand the used equipment to a designated collection point for proper processing. Used equipment can also be
handed over to the seller, if one buys a new product in an amount not greater than the new purchased equipment of the same
type. Information on the available collection system of waste electrical equipment can be found in the information desk of the
store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for the
environment and human health!
