ViSAGE VIS070 Bedienungsanleitung
LED SPIDER LIGHT
Stock code: VIS070
INSTRUCTION MANUAL
Specifications
LED’s: 8 x 6 watt RG W
Power: 55watts
Power Inlet: 240v 50Hz
Mains Inlet/Outlet sockets: IECC 3pin
DMX connection: 3pin XLR Male and 3 pin XLR Female
DMX C annels: 7 Channel or 15 channel
Control Modes: DMX, master/Slave Mode, Sound Activation, Auto run
Dimmable: 0-100%
Beam angle: 4.5 degrees
Rotation angle: 180 degrees
Dimensions: 285mm length x 165mm width x 126mm height
Weig t: 1.9Kg
2.
Digital Display and Menu
Switch on the unit and the two moving parts will reset themselves to the start
point.
Using the menu below select the MENU pattern you require:
READING FUNCTION
Addr This sets the DMX address A001-A512
C nd Selects DMX mode from 7 channel or 15 channel
SLnd MAST, SLAV, Soun (selects Master, Slave or sound operation
S nd Sh1—Sh24 the selection of effects, Sh24, multi effects
SPED- amends the speed of the chase from 01-08.
Soud ON, OFF sound control switch
SoEn Sound Control Sensitivity 0=off, 100= most sensitive
LED ON, OFF display lighting
DISP YES, NO reverse display
1TiL YES, NO Motor 1 is reversed
2TiL YES, NO Motor 2 is reversed
TEST Automatic testing
DEFT YES, NO restore to factory settings
MASTER/SLAVE MODE:
If you require one unit to act as the master and multiple units to simply repeat,
this can be achieved by selecting SLnd on the menu, then press ENTER, then
press UP or DOWN button until the display reads MAST, you have now
selected this unit to become the master.
Using the same process for each additional unit select SLAV this will create the
slave units. Link each unit via the DMX in and out sockets with XLR leads and
the units are ready to operate in sync.
MODE UP DOWN ENTER
3.
DMX OPERATION:
The unit has two modes of DMX operation either 7 channels or 15 channels.
Using the menu buttons select the units to the desired channel C nd.
You then need to set the DMX channel of each channel, firstly select Addr on
the menu and press ENTER, then using the up and down buttons select the
DMX channel required, once selected press ENTER to confirm.
7 C annel DMX operation
DMX C annel Function DMX Value Function
1 Motor 1 Travel 0-255 60’—150’
2 Motor 2 Travel 0-255 60’- 150’
3 Dimming 0-255 0-100%
4 Strobe 0-9 static 10-255 Speed
5
Pre-Programmed
Effects.
1-23
0-7 No Effect
8-17 Effect 1
18-27 Effect 2
28-37 Effect 3
38-47 Effect 4
48-57 Effect 5
58-67 Effect 6
68-77 Effect 7
78-87 Effect 8
88-97 Effect 9
98-107 Effect 10
108-117 Effect 11
118-127 Effect 12
128-136 Effect 13
137-146 Effect 14
147-156 Effect 15
157-166 Effect 16
167-176 Effect 17
177-186 Effect 18
187-196 Effect 19
197-206 Effect 20
207-216 Effect 21
217-226 Effect 22
227-236 Effect 23
4.
DMX 7 C annel Operation continued-
DMX C annel Function DMX Value Function
5 continued Motor control 237-246 Effect 24 Multi-effect
self-propelled, the
motor runs
automatically
247-255 Effect 25 Sound Control
6 Effect Speed 0-255 From slow to fast
7 Reset 241-250 Hold for 5 seconds to
reset the unit.
15 c annel DMX Operation
DMX C annel Function DMX Value Function
1 Motor 1 Travel 0-255 60’ – 150’
2 Motor 2 Travel 0-255 60’ – 150’
3 Dimming 0-255 0-100%
4 Strobing 0-9 static 10-255 strobe speed
5 LED 1 Dimming 0-255 0 – 100%
6 LED 2 Dimming 0-255 0 – 100%
7 LED 3 Dimming 0-255 0 – 100%
8 LED 4 Dimming 0-255 0 – 100%
9 LED 5 Dimming 0-255 0 – 100%
10 LED 6 Dimming 0-255 0 – 100%
11 LED 7 Dimming 0-255 0 – 100%
12 LED 8 Dimming 0-255 0 – 100%
13
Pre-Programmed
Effects.
1-23
0-7 No Effect
8-17 Effect 1
18-27 Effect 2
28-37 Effect 3
38-47 Effect 4
48-57 Effect 5
58-67 Effect 6
68-77 Effect 7
78-87 Effect 8
88-97 Effect 9
Effect 10
5.
DMX 15 C annel operation continued:
DMX C annel Function DMX Value Function
13
Pre-Programmed
Effects 1-23
24 and 25 affects
the motors
regarding colours
and automatic
98-107 Effect 10
108-117 Effect 11
118-127 Effect 12
128-136 Effect 13
137-146 Effect 14
147-156 Effect 15
157-166 Effect 16
167-176 Effect 17
177-186 Effect 18
187-196 Effect 19
197-206 Effect 20
207-216 Effect 21
217-226 Effect 22
227-236 Effect 23
237-246 More than 24 effects
automatic
247-255 Effect 25 Voice
Control
14 Effect Speed 0-255 From slow to fast
15 Reset 241-250 Hold for 5 seconds to
reset
This product is distributed in the UK by
Beckery Road, Glastonbury, Somerset, BA6 9NX
Telep one: 01458.833186
E-mail: info@batmink.co.uk
Website: www.batmink.co.uk
Inhaltsverzeichnis
Andere ViSAGE Beleuchtungsausrüstung Handbücher
ViSAGE
ViSAGE VIS0495.2 Bedienungsanleitung
ViSAGE
ViSAGE WR-5106 Bedienungsanleitung
ViSAGE
ViSAGE VIS086 Bedienungsanleitung
ViSAGE
ViSAGE VIS245 STAGE DESK 48 Bedienungsanleitung
ViSAGE
ViSAGE VIS0495.4 Bedienungsanleitung
ViSAGE
ViSAGE VIS514 Bedienungsanleitung
ViSAGE
ViSAGE VIS130 Hypermove Bedienungsanleitung
ViSAGE
ViSAGE VIS085 Bedienungsanleitung
ViSAGE
ViSAGE VIS0495.1 Bedienungsanleitung
ViSAGE
ViSAGE VIS055 Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
