Vision Technology The View CCTV Bedienungsanleitung
Made in the USA
TheViewTM CCTV
Owners Manual &
Set-up Instructions
2
TABLE of CONTENTS
Important Information 3
Introduction 4
Unpacking 4
Set-up 5-12
Close Down 13-15
Operating Controls Diagram 16
Description of Controls 16-17
Operating your View 18
Care and Maintenance 19
Warranty & Service Informa-
tion
19
3
Important Information
Thank you for choosing the VIEWTM
portable video magnification system. The
VIEW is a quality portable in-line system
with a movable camera, distance, close-up
and mirror image viewing capability.
Should your VIEW require service, refer to
the Warranty Information section in this
manual.
Caution: Do not remove the cover on the
monitor or camera. There are no user
serviceable parts inside. Any changes or
modifications not expressly approved or
performed by Vision Technology, Inc. could
void the user’s warranty.
Record the Serial number and date pur-
chased: Model vt 3315
Serial Number: __________
Date Purchased _____/_____/2006_
Please return the registration card in the
mail (no postage required) or call 1-800-
560-7226 to register your View with the
manufacturer and validate the warranty.
4
Introduction
Although your new system is very simple
to use, it is very important that you read
the instructions in this guide very carefully.
This step by step manual is arranged in the
way we anticipate you will operate your
new system.
Should you require assistance with set-up
or a service issue please contact our client
care department Monday—Friday 8:30am -
4:30 pm CST at 1-800-560-7226. Our
service department is here to provide
courteous and knowledgeable responses to
your inquiries.
Unpacking
Carefully remove the unit from the carton.
Save all of the packing materials,
including shipping carton(s). They will
come in handy if you have to store or ship
your system. After unpacking, use the fol-
lowing checklist to make sure you have
each of the listed items:
5
Checklist
_____ VIEW Video Magnification System
_____ Power Supply (yellow plug)
_____ Packaging material
_____ Owner’s Manual
_____ Product Registration Card
Optional Accessories purchased may include:
_____ Lithium Battery
_____ Charger for Battery (black plug)
_____ Soft Sided Carrying Case
Set-up
Place the CCTV base on a sturdy work
surface, such as a desk or table. Be sure
there is enough room to work with your
CCTV as you move the X-Y Table from side to
side. A little extra space on either side of the
system is also nice for placing additional
reading materials or other items.
Follow the photos and descriptions for
setting up (pages 6–12) and closing down
(pages 13–15) your View CCTV.
6
Opening the ViewTM.
1. Set the View on a flat surface. 2. Grasp the
back of the table top with the paper stop
raised edge and pull up and out. The table
top is held in place with 2 locking clips shown
below. 3. Lift up the tray.
Side View with monitor & camera up
7
View Folded Flat
Unclip the table
Lift up
8
Lift here
Raise the table top to its fullest upright
position as shown below. 4. Grasp the top of
the monitor and lift up as shown below.
9
5. Reach in with one hand and pull the cam-
era up 2-3 inches to release the components.
6. Raise the monitor & camera will rise.
Raising the monitor also raises the camera
Lift up camera
10
7. Support the monitor up with one hand and
turn the camera 180 degrees clockwise so the
U-bar is angled away from the monitor. 8.
Push up on the camera moving it towards the
monitor with a gentle motion until the camera
clicks into place.
Lift up camera U-bar to lock in place
Turn 180 degrees
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Vision Technology Vergrößerungsglas Handbücher
Beliebte Vergrößerungsglas Handbücher anderer Marken
HIMS
HIMS SenseView DUO Bedienungsanleitung
nedis
nedis MAGL12WWT Bedienungsanleitung
Ryobi
Ryobi RML18-0 Bedienungsanleitung
Eschenbach
Eschenbach Visolux Digital XL FHD Bedienungsanleitung
ENHANCED VISION
ENHANCED VISION Merlin Bedienungsanleitung
Ash Technologies
Ash Technologies Andromeda Bedienungsanleitung
