Visonic CLIP SMA Bedienungsanleitung

Motion Sensor Battery Installation - Visonic CLIP SMA

What You’ll Need

•CLIP SMA Motion Sensor

•A Phillips-head screwdriver

•One CR123A battery

•Double-sided tape (optional)

How to Install the Battery

Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can

generate false alarms.

Did You Know? You may want to have some double-sided tape on hand if you need to remove your Sensor from the

wall to install a battery. Cut the tape to size and reattach your Sensor if the existing adhesive fails to hold it in place.

Is This Your Sensor? Make sure that your

Sensor looks like the one in the image. If it

does, you have the right document to find out

how to install a battery in your Sensor.

1. Locate the screw on the top of the Sensor.

2. Using a Phillips-head screwdriver, turn the

screw counterclockwise until the cover is

loose.

3. Gently pull the top of the cover away from

the screw, then pull down to free the

bottom tab on the cover from the slot in the

bottom of the Sensor. The battery slot is on

the circuit board.

Take a Look. If a battery is already present,

remove it by using your fingertip to gently pull

one end of the battery up until the battery is

loose and you can pull it free from the slot.

4. Install a CR123A battery by aligning the

positive (+) and negative (-) ends of the

battery with the positive (+) and negative

(-) indicators on the circuit board and

pressing the battery into the battery clasps.

5. When the battery is inserted correctly, the

red light on the circuit board will light up.

Did You Know? The Motion Sensor and

tamper are exposed once you remove the

cover (shown below within the blue squares).

Take care not to touch them. Repeated contact

with the Sensor may compromise the

functionality of your device and pressing down

the tamper will default the Sensor.

6. Slide the tab on the bottom of the cover

into the slot at the bottom of the Motion

Sensor.

7. Press and hold the top of the cover against

the Sensor's body and use a Phillips-head

screwdriver to turn the screw clockwise

until tight.

Confirm that the low battery alert has resolved and the equipment appears on your list of connected devices. You

should also ensure that sensor events such as door opening or motion registers as an activity on your system.

Need Help? Find these instructions online at

https://customer.xfinity.com/help-and-support/home-security/installing-battery-clip-sma-motion-sensor. Get more

troubleshooting support at https://www.xfinity.com/support/gettingstarted/troubleshooting/ or contact a customer service

expert at 1-800-XFINITY.

Help Protect Our Environment: Please properly recycle your discarded batteries. For your convenience, batteries are

accepted for recycling at various locations. Check www.call2recycle.org or call 1-800-8-Battery (1-800-8-228-8379) to

find a recycling location near you.

Andere Handbücher für CLIP SMA

Inhaltsverzeichnis

Andere Visonic Sicherheitssensor Handbücher

Visonic

Visonic MP-840 Bedienungsanleitung

Visonic

Visonic SRN-2000 SERIES Bedienungsanleitung

Visonic

Visonic DE1260 DISCOVERY QUAD Bedienungsanleitung

Visonic

Visonic NEXT PIR MCW Bedienungsanleitung

Visonic

Visonic K-980D Bedienungsanleitung

Visonic

Visonic NEXT K9-85 Bedienungsanleitung

Visonic

Visonic K-940MCW Bedienungsanleitung

Visonic

Visonic MR-4000 Bedienungsanleitung

Visonic

Visonic NEXT CAM PG2 Bedienungsanleitung

Visonic

Visonic MCW-570 Bedienungsanleitung

Visonic

Visonic TOWER 10 AM - Bedienungsanleitung

Visonic

Visonic NEXT PLUS Series Bedienungsanleitung

Visonic

Visonic NEXT PLUS MCW Bedienungsanleitung

Visonic

Visonic TOWER 20 AM - INSTALLER GUIDE Bedienungsanleitung

Visonic

Visonic FLD-550 PG2 Bedienungsanleitung

Visonic

Visonic NEXT PG2 - Bedienungsanleitung

Visonic

Visonic MCT-441 Bedienungsanleitung

Visonic

Visonic Vi-motion Bedienungsanleitung

Visonic

Visonic NEXT PG2 - Bedienungsanleitung

Visonic

Visonic MCT-442 Bedienungsanleitung

Visonic

Visonic DISCOVERY PIR MCW - INSTALLER GUIDE Bedienungsanleitung

Visonic

Visonic POWERMAX - Bedienungsanleitung

Visonic

Visonic Logica Bedienungsanleitung

Visonic

Visonic DUET Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung