Vista VM215 Bedienungsanleitung

VM215 LED Monitor Quick Guide Ver 1.0 2023-06-13

21.5” LED Monitor

Before You Begin

Please read this guide before installing or operating the product. You must have knowledge of

CCTV, IT and electrical wiring and products.

Technical Support

If you still have questions after referring to the guide, or require more information, please contact

Vista Technical Support or use the QR code.

Vista Technical Support +44 (0) 118 912 5125

Norbain SD, Inspired, Easthampstead Road, Bracknell, Berkshire RG12

1YQ

* WARNING: Improper use can cause severe bodily injury or

equipment damage.

This guide is intended for use with the Vista VM215 LED 21.5” Monitor.

1. Packing List

Please contact Norbain if any items are missing or damaged and note contents will vary according

to each camera model number.

➢Monitor

➢Pedestal

➢Power cable

➢HDMi cable

➢QR Code label1

*1Scan in order to access the Vista website for product info and this quick guide

2. Safety & Maintenance Instructions

•Use only correctly rated PSUs supplied with the device.

•Do not use this apparatus near water.

•Do not install near any heat sources such as radiators, stoves, or other apparatus (including

amplifiers) that product heat.

•Do not block any ventilation openings.

•Protect the power cord from being walked on or pinched.

•Only use attachments/accessories specified by the manufacturer.

•Unplug this apparatus during lightning storms.

•Refer all servicing to qualified service personnel only. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid spillage etc.

CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE

BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE

THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY

SERVICING OTHER THAN THAT CONTAINED IN THE

OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED

TO DO SO.

3. Connecting The Monitor

Follow the below to connect your monitor correctly.

Caution: First, turn off and disconnect any power to be used for this device!

- Determine if you will be using HDMi or VGA to connect to the device that you wish to

display on the VM monitor. Connect the relevant cable.

- Determine if an audio connection is required to Audio In via a 3.5mm audio jack plug

and lead. Note: if using HDMi, then it may be possible audio could be caried via that

cable instead.

- Now connect and turn on power to the monitor and your connected device if needed.

- Refer to the next section –Main Menu Settings.

4. Main Menu Settings

Control buttons are located on the bottom left of the bezel and detailed below.

"Source" button: Press to display OSD with all possible signal inputs.

Press button again to change the selected function in 0SD menu.

"Downward" button: Press to move the cursor downwards in any menu.

"Upward" button: Press to move the cursor upwards in any menu.

"Menu" button: Press to display the 0SD main menu.

Press again to Exit.

"Power" button: Press to turn on or turn off the display

The sub-menus of the main menu are detailed below: PC Menu, Picture menu, Audio menu, OSD

menu and Function menu.

Press the menu button to select the sub-menu item. The selected menu item will show a bordered

wireframe. Press the .6. T button to move among the secondary menu items of the sub-menu.

PC MENU (PC SOURCE)

PC menu sets the contrast, brightness, backlight,

colour temperature and scale function. Press

buttons to adjust each value whilst selected,

press to exit.

BRIGHTNESS MENU

Sets the brightness, contrast, black equalizer, low

blue, eco and OCR function.

Press buttons to adjust each value whilst

selected, press to exit.

IMAGE MENU

IMAGE menu can set H. POSITION, V.

POSITION, CLOCK, PHASE and ASPECT

function.

Press buttons to adjust each value whilst

selected, press to exit.

COLOR TEMP. MENU

COLOR menu can set COLOR TEMP. function.

Press buttons to adjust each value whilst

selected, press to exit.

OSD SETTING MENU

OSD SETTING menu can adjust LANGUAGE,

OSD H. POS, OSD V. POS, OSD

TIMER and TRANSPARENCY function.

Press buttons to adjust each value whilst

selected, press to exit.

RESET MENU

RESET menu can set IMAGE AUTO ADJUST,

COLOR AUTO ADJUST, RESET,

AUTO POWERDOWN and TIMECOUNT

function.

Press buttons to adjust each value whilst

selected, press to exit.

MISC. MENU

MISC. Menu can adjust SIGNAL SOURCE,

MUTE and VOLUME function.

Press buttons to adjust each value whilst

selected, press to exit.

5. Troubleshooting

Before consulting with Vista Support, please use the following chart to attempt to diagnose any

issue.

Problem

Fix

No image or sound

Inferior sound, normal image

Inferior image, normal sound

Poor signal

Vague image

Double

image

Interfering lines in image

Twisty image

Poor signal

Rung stripe in image

Image vertically scrolls

Inferior colour

No colour

Fix

Switch to another channel or input and compare.

Check the audio signal line is connected.

Check the video signal line is connected.

Interference from another electric appliance may be present.

Adjust fine tuning setting.

Adjust luminance setting.

Adjust contrast ratio setting.

Adjust colour setting.

Check whether the system is set-up correctly.

Check whether the power is on.

How to Clean Product

1. Please wipe off dust and other particles with a clean, soft towel.

2. If still not clean, use a neutral cleaner wipe dry.

3. Rubbing or scrapping the housing, with fingernails or other hard objects, may scratch the

housing.

Where applicable, a Declaration of Conformity in accordance with Directives 2014/30/EU (EMC), 2014/35/EU

(LVD), and 2015/863/EU RoHS(3) has been made and we declare the product compliant.

Where applicable, the requirements of the European law on the Restriction of Hazardous Substances (RoHS)

directive: 2015/863/EU have been met and the product is without the hazardous substances cited in the

directive.

Our CE EU-Authorised Representative: Comply Express Unipessoal LDA, StartUp Madeira - EV141,

Campus da Penteada, 9020-105 Funchal, Madeira, Portugal”

Symbolizes that within the European Union the product must be collected separately at the product end-of-

life. Do not dispose of these products as unsorted municipal waste.

A UK Declaration of Conformity in accordance with GB UKCA standards has been made. The manufacturer

declares that the product supplied with this document is compliant with the provisions of the Electromagnetic

Compatibility Regulations 016, and where applicable, the Electrical Equipment (Safety) Regulations 2016

Directives.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user

may be required to take adequate measures.

No liability will be accepted by Vista for any errors or omissions in this information and reserves

the right to make changes to the product and its specification from time to time without prior notice.

Inhaltsverzeichnis

Andere Vista Monitor Handbücher

Vista

Vista VFSM15 Bedienungsanleitung

Vista

Vista TV14E Betriebsanleitung

Vista

Vista VFS-200/HI-LITE Series Bedienungsanleitung

Vista

Vista DIAMOND Bedienungsanleitung

Vista

Vista VK2-PVM27CAM Bedienungsanleitung

Vista

Vista VFS-300LED Leitfaden

Vista

Vista VLFSM15D_h Bedienungsanleitung

Vista

Vista TV14 Betriebsanleitung

Vista

Vista PVM19CAM Bedienungsanleitung

Vista

Vista VFS132WHDA Leitfaden

Vista

Vista PVM18DEC Bedienungsanleitung

Vista

Vista VK2-PVMxxDEC Series Bedienungsanleitung

Vista

Vista VFS-300 Series Leitfaden

Vista

Vista VK2-PVM10CAM Bedienungsanleitung

Vista

Vista VK2-PVM32CAM Bedienungsanleitung

Vista

Vista VFS24/32HDIP Bedienungsanleitung

Vista

Vista PVM10CAMN Bedienungsanleitung

Vista

Vista VFS-221WHDA Bedienungsanleitung

Vista

Vista PVM27CAM Bedienungsanleitung

Vista

Vista VFS-200LED Leitfaden

Vista

Vista VFS100LEDe Series Bedienungsanleitung

Vista

Vista PVM27DEC Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung