Please check your box contents match the Whats in the box section before installation. If any are missing,
please contact your dealer.
1) Ensure power is turned off to switch.
2) Use network cable to connect PoE IP camera to the PoE ports.
3) Use a network cable to connect the uplink ports to NVR or computer.
4) Connect power adapter.
5) Check if the installation is correct, equipment is in good condition and the connections are stable,
6) Power can now be turned on.
7) Ensure all equipment is working correctly.
INSTALLATION STEPS
! NOTE
For help please refer to the customer support section of the Quick Start Guide.
PRODUCT OVERVIEW
! NOTE
Transmission distances can be related to the cable used, Cat5e/6 cables are recommended.
The VSW PoE switches have been designed to operate primarily with CCTV surveillance cameras. The small
compact casing makes it ideal for use in distributed architecture type systems. Having dual Up-link ports they
can be connected to local NVRs, while the second port can be connected to the systems main back bone for
connection to VMS clients, or routers.
Model
Ports Max. PoE Power Switching
Capacity
Extend
Mode Features
PoE Ports Uplink Ports SFP Ports Max
Capacity
Single
Port
VSW4 4x 10/100 Mbps 2x 100Mbps #NA 60W 30W 1.6Gbps 250m ▶PoE Standard:
IEEE802.3 af/at
▶Port Lightning
protection:
4KV 8/20us
▶Protection
level: IP30
▶Plug & Play
VSW8 8x 10/100Mbps 2x 1000Mbps #NA 120W 30W 11.8Gbps 250m
VSW16 16x 10/100Mbps 2x 1000Mbps #NA 200W 30W 14.8Gbps 250m
VSW24 24x 10/100Mbps 2x 1000Mbps 2x 1000Mbps 400W 30W 14.8Gbps #NA
F E ATU RE S
▶Complies to IEEE802.3af/at, 10Based-T, 100Based-T,
1000Based-T
▶Ethernet Port Rate: self-adaptive 10/100Mbps and 2
self-adaptive 10/100/1000Mbps (excludes VSW4)
▶Plug and Play
▶Working mode: asynchronization, point to point,
full/half duplex self-negotiation
▶User-friendly panel, LED indicator of PWR, PoE, Link/
Act and Speed Rate
▶Functional switch, supporting the switching from
standard to long transmission mode (100m/250m
(excludes VSW24 - Range 100m))
▶Two SFP GBIC ports for Fibre connection. (VSW24 only)
▶19’ standard cabinet (Mounting brackets supplied
(8/16/24), doesn’t apply to VSW4)
Read all instructions and enclosed guides supplied before installing or operating this product.
We recommend you have a basic knowledge of CCTV & IT systems and electrical wiring and products.
WHATS IN THE BOX
Please kindly check the following items:
Contents VSW4 VSW8 VSW16 VSW24
PoE Switch ✓✓✓✓
Power Cable ✓✓✓✓
User Guide ✓✓✓✓
Mounting kit ✗ ✓ ✓ ✓
STATEMENT
! NOTE
If any product shortage or damage is found, please make contact with the company who supplied the goods
WARNING: Improper use can cause severe bodily injury or equipment damage.
Router
NVR
Monitor
PoE Ethernet
Switch
Cat5e/6
network
cable
PoE IP
PoE IP
camera
PoE Dome
camera
PoE PTZ
