Visual Circuits H-DVP Bedienungsanleitung
H-DVP System
User Manual
Visual Circuits Corporation
Trademarks
The Visual Circuits logo is a registered trademark in the United States
and other countries. All other products, services or company names
mentioned herein are claimed as trademarks and trade names by their
respective companies.
c Visual Circuits, 1999-2000. All rights reserved.
No portion of this manual may be copied by any means without the prior
consent of Visual Circuits.
Visual Circuits
5155 East River Road, Suite 401
Minneapolis, MN 55421
http://www.visualcircuits.com
Visual Circuits Publication Number: 813-0002a
Federal Communications Radio Frequency Interference
Statement
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructional manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense. However, if this
equipment does cause interference to radio or television equipment
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures
❏Reorient or relocate the receiving antenna.
❏Increase the separation between equipment and receiver.
❏Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
❏Consult the dealer or an experienced radio/television
technician for help.
Compliance with Part 15 of the FCC Rules and
Regulations
This H-DVP system complies with Part 15 of the FCC rules and
regulations. Operation is subject to the following two conditions:
❏This device may not cause harmful interference.
❏This device must accept any interference that may cause
undesired operation.
Industry Canada
This Class A digital appartus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences du
Regulement sur le materiel brouilleur du Canada.
EMC and Safety irective Compliance
The CE mark is affixed to this Visual Circuits Corporation product to
confirm compliance with the following European Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of
the laws of Member States relating to electromagnetic compatibility.
And
Council Directive 73/23/EEC of 19 February
1973 on the harmonization of the laws of
Member States relating to electrical equipment
designed for use within certain voltage limits:
Each ammended by
Council Directive 93/68/EEC of 22 July 1993
on the harmonization of CE marking
requirements.
NOTE
Changes or modifications to this device not
expressly approved by the party responsible for
compliance could void the userºs authority to
operate the device.
Safety and Regulatory Requirements
CAUTION
The V and C -ROM drives contain a laser
system and are ·Class 1 Laser Products¸
under a U.S. epartment of Health and Human
Services ( HHS) Radiation Performance
standard, according to the Radiation Control
for Health and Safety Act of 1968.
Should a unit ever require maintenance,
contact an authorized repair location.
CAUTION
An incorrectly replaced battery can cause an
explosion.
A lithium battery on the product provides
backup po er for the timekeeping
mechanism. Should the battery fail, contact
an authorized repair location.
WARNING
An improperly grounded power supply can
result in electrical shock.
The AC po er cord provided ith your system
has a grounded plug. Al ays use a grounded
po er cord ith a properly grounded all
outlet.
CAUTION
Static electricity can harm delicate
components inside your server.
Discharge static electricity from your body
before you touch any of your computerºs
electronic components.
i
CONTENTS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installing the H- VP System . . . . . . . . . . . . . . . . 3
Choosing an Appropriate Installation Location . . . . . .3
Installing the H-DVP System to a Rack . . . . . . . . . . . .4
Connecting Server Peripherals . . . . . . . . . . . . . . . . . . .4
Connecting Output and Power Cables . . . . . . . . . . . . .5
Connecting the Universal Cable . . . . . . . . . . . . . . .7
Connecting the Rackmount Breakout Box . . . . . . .7
Using the H Serve Application . . . . . . . . . . . . . . 9
Testing the Installation . . . . . . . . . . . . . . . . . . . . . . . .10
Playing MPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loading Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Playing Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using Cross-Channel Synchronization . . . . . . . . . . . .11
Controlling Playback. . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting the Program ID . . . . . . . . . . . . . . . . . . . . . . . .13
Using the H Com Application . . . . . . . . . . . . . . 15
Setting Up a Serial Controller. . . . . . . . . . . . . . . . . . .15
Serial Command Reference. . . . . . . . . . . . . . . . . . . . .16
Callbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Playback Commands. . . . . . . . . . . . . . . . . . . . . . .18
Cross-Channel Synchronization Commands. . . . .29
ii
Contents
Informational Commands . . . . . . . . . . . . . . . . . . .32
Registry Editing . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring the Driver . . . . . . . . . . . . . . . . . . . . . . . .37
Common Parameters. . . . . . . . . . . . . . . . . . . . . . . . . .37
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 41
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . .41
Contacting Visual Circuits Corporation . . . . . . . 45
Contacting Technical Support. . . . . . . . . . . . . . . . . . .45
Information for Value Added Resellers or
Distributors. . . . . . . . . . . . . . . . . . . . . . . . . .45
What You Should Have Ready When You Call . .45
What You Can Expect When You Call. . . . . . . . .45
Technical Support Contact Information . . . . . . . .46
Returning Materials to Visual Circuits Corporation
(VAR/Distributor) . . . . . . . . . . . . . . . . . . . . . . . . .46
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
HD Software Developers Kit . . . . . . . . . . . . . . . . . . .49
General API information. . . . . . . . . . . . . . . . . . . .49
File Playback Commands . . . . . . . . . . . . . . . . . . .50
Audio/Video Output Commands. . . . . . . . . . . . . .58
Synchronization Functions . . . . . . . . . . . . . . . . . .65
Callback Functions . . . . . . . . . . . . . . . . . . . . . . . .68
Information Commands. . . . . . . . . . . . . . . . . . . . .71
iii
Contents
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
iv
Contents
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung