Vivitek DU9800Z Bedienungsanleitung

DU9800Z

Remote Communicaton

Manual

DU9800Z DLP Pro

ecto

Remote Communication Manual

Table of Contents

The Serial Interface RS-232 Command ........................................................................................2

Communication parameter.........................................................................................................2

Operation commands.................................................................................................................2

Operation command syntax .................................................................................................2

List of operation commands .................................................................................................3

Simulated IR remote controller commands ..............................................................................15

List of simulated IR remote controller commands ....................................................................15

Control the Projector Through a Network..................................................................................16

Cable connection .....................................................................................................................16

Set up the projector for networking ..........................................................................................17

Control the projector through a network ...................................................................................18

Control the projector through a web browser .....................................................................18

Control projector with TCP/IP communication protocol ......................................................22

About Vivitek Support .................................................................................................................23

DU9800Z DLP Pro

ecto

Remote Communication Manual

The Serial Interface RS-232 Command

This projector supports to control by RS-232 command, there exist two types of RS-232 serial commands:

Operation command: Available menu options are INPUT, PICTURE, ALIGNMENT, CONTROL and SERVICE.

Simulated IR remote controller commands: Controls projector via RS-232 command, the commands simulate IR

remote controller and its control keys.

Communication parameter

You can use the serial control command to input commands for projector control or retrieve its operational data

through Windows client terminal software, e.g. Hyper Terminal, with ASCII characters. You need to set up the following

communication parameters in advance:

Item Parameter:

Bit per Second 9600 bps

Data Bit 8-bit

Parity None

Stop Bit 1

Flow Control None

Port 7000

Note:

The terminal software does not return every command input character

The transmission performance varies with the length of RS-232 cable

Operation commands

Operation command syntax

An operation command is prefixed by character "op", followed by control commands and settings separated by

space blank [SP], and ended by carriage return pair "CR" and "ASCII hex 0D".Syntax of serial control

commands:

op[SP]<operation command>[SP]<Setting Value>[CR]

op :

A constant indicating this is an operation command.

[SP] :

Indicate one blank space.

[CR] :

Indicate the command ending carriage return pair "CR" and "ASCII hex 0D".

Setting value : Settings of operation command

Types of setup strings Characters of settings Description

Query current setup ? Question mark "?" indicates querying current setup

Setup = <settings> Syntax: Symbol "=" suffixed with setup values

Increase setup order of

adjustment items

+ Some settings are changed in steps. Symbol "+"

indicates changing one step up

Decrease setup order of

adjustment items

- Some settings are changed in steps. Symbol "-"

indicates changing one step down

Execute operation command None Certain operation commands execute after input

without further setting or regulators.

Examples:

Control items Input command Projector return message

Query current brightness op bright ? [CR] OP BRIGHT = 101

Set up brightness op bright = 127 [CR] OP BRIGHT = 127

Set up input signal source to

HDMI

op input.sel = 0 [CR] OP INPUT.SEL = 0

Reset projection lens to

center position

lens.center

Note:

When sending the multiple commands, make sure the return message of the last command is received

before sending out the next one.

DU9800Z DLP Pro

ecto

Remote Communication Manual

List of operation commands

INPUT

OSD Function Operation

command Settings/Return Values Note

Input Select input.sel ?

0 = HDMI 1

1 = HDMI 2

2 = VGA

3 = Component / BNC

4 = DVI

5 = DisplayPort

6 = 3G-SDI

7 = HDBaseT

Not applicable when the project is at

standby mode

PIP/PIP Option pip.mode ?

0 = Off

1 = On

Not applicable when the project is at

standby mode and 3D mode

PIP/PIP Input pip.sel ?

0 = HDMI 1

1 = HDMI 2

2 = VGA

3 = Component / BNC

4 = DVI

5.= DisplayPort

6 = 3G-SDI

7 = HDBaseT

Not applicable when the project is at

standby mode or PIP option is set to

Off.

PIP/ Position pip.pos ?

0 = Top Left

1 = Top Right

2 = Bottom Left

3 = Bottom Right

4 = PBP

Not applicable when the project is at

standby mode or PIP is set to Off.

Auto Source auto.src ?

0 = Off

1 = On

Not applicable when the projector is

at standby mode.

Auto Sync Auto.mg (execute) Available when source is locked.

Color Space color.space ?

0 = Auto

1 = YPbPr (Rec. 709)

2 = YcbCr (Rec. 601)

3 = RGB-PC (0-255)

4 = RGB-Video (16-235)

Available when source is locked.

Aspect Ratio aspect ?

0 = 5:4

1 = 4:3

2 = 16:10

3 = 16:9

4 = 1.88

5 = 2.35

6 = LetterBox

7 = Source

8 = Native

Available when the source is locked.

VGA Setup/H Total h.total ?

0-200

Available when the source is locked

Or Input source is VGA or

Component(RGBHV)

VGA Setup/H Start h.pos ?

0-200

Available when the source is locked

Or Input source is VGA or

Component(RGBHV)

DU9800Z DLP Pro

ecto

Remote Communication Manual

OSD Function Operation

command Settings/Return Values Note

VGA Setup/H Phase h.phase ?

0-200 Available when the source is locked.

Input source is VGA or

Component(RGBHV)

VGA Setup/V Start v.pos ?

0-200 Available when the source is locked.

Input source is VGA or

Component(RGBHV)

Test Pattern pattern ?

0 = Off

1 = CrossHatch

2 = Color Bar

3 = Checkboard

4 = H Burst

5 = V Burst

6 = White

7 = Red

8 = Green

9 = Blue

10 = Black

Not applicable when the project is at

standby mode.

3D/3D Format 3d.format = ? 0 = Off

1 = Auto

2 = Side-By-Side (Half)

3 = Top-And-Bottom

4 = Frame Sequential

Not applicable when the project is at

standby model.

3D/Eye Swap 3d.swap = ? 0 = Normal

1 = Reverse

Applicable when the projector is at

3D mode.

3D/DLP Link 3d.dlplink = ? 0 = Off

1 = On

Applicable when 3D.Darktime is set

to 2 (1.95ms)

3D/Dark Time 3d.darktime = ? 0 = 0.65 ms

1 = 1.3 ms

2 = 1.95 ms

Applicable when the projector is at

3D mode.

3D/sync delay 3d.syncdelay = ? 1 – 60 Applicable when the projector is at

3D mode.

3D/Sync Reference 3d.syncref = ? 0 = External

1 = Internal

2 = Auto

Not applicable when the project is at

standby mode.

PICTURE

OSD Function Operation

command

Settings/Return Values Note

Picture Mode pic.mode ?

0 = High Bright

1 = Presentation

2 = Video

Not applicable when the project is at

standby mode.

Brightness bright ?

0-200 Not applicable when the project is at

standby mode or the input signal is

not locked yet.

Contrast contrast ?

0-200 Not applicable when the project is at

standby mode or the input signal is

not locked yet.

Saturation saturat ?

0-200 Apply for YUV signal input

Not applicable if the input signal is

not locked yet.

DU9800Z DLP Pro

ecto

Remote Communication Manual

OSD Function Operation

command

Settings/Return Values Note

Hue tint ?

0-200 Apply for YUV signal input

Not applicable if the input signal is

not locked yet.

Sharpness sharp ?

0-15 Not applicable when the project is in

standby mode or the input signal is

not locked yet.

Color Temperature color.temp ?

0 = 5400K

1 = 6500K

2 = 7500K

3 = 9300K

4 = Native

Not applicable at 3D mode

Gamma gamma ?

0 = 1.0

1 = 1.8

2 = 2.0

3 = 2.2

4 = 2.35

5 = 2.5

6 = S-Curve

7 = DICOM

Not applicable when the project is at

standby mode or the input signal is

not locked yet.

Color Gamma Color.gamut ?

0 = REC709

1 = EBU

2 =SMPTE

3 = Native

Not applicable when the project is at

standby mode or the input signal is

not locked yet.

Input Balance /Red

Offset

red.offset ?

0-200 Available when the input source is

locked.

Input Balance /Green

Offset

green.offset ?

0-200 Available when the input source is

locked.

Input Balance /Blue

Offset

blue.gain ?

0-200 Available when the input source is

locked.

Input Balance /Red

Gain

red.gain ?

0-200 Available when the input source is

locked.

Input Balance /Green

Gain

green.gain ?

0-200 Available when the input source is

locked.

Input Balance /Blue

Gain

blue.gain ?

0-200 Available when the input source is

locked.

HSG/Red Gain hsg.r.gain ?

0-200 Available when the input source is

locked.

HSG/Green Gain hsg.g.gain ?

0-200 Available when the input source is

locked.

DU9800Z DLP Pro

ecto

Remote Communication Manual

OSD Function Operation

command

Settings/Return Values Note

HSG/Blue Gain hsg.b.gain ?

0-200 Available when the input source is

locked.

HSG/Cyan Gain hsg.c.gain ?

0-200 Available when the input source is

locked.

HSG/Magenta Gain hsg.m.gain ?

0-200 Available when the input source is

locked.

HSG/Yellow Gain hsg.y.gain ?

0-200 Available when the input source is

locked.

HSG/Red/Saturation hsg.r.sat ?

0-200 Available when the input source is

locked.

HSG/Green/Saturation hsg.g.sat ?

0-200 Available when the input source is

locked.

HSG/Blue/Saturation hsg.b.sat ?

0-200 Available when the input source is

locked.

HSG/Cyan/Saturation hsg.c.sat ?

0-200 Available when the input source is

locked.

HSG/Magenta/

Saturation

hsg.m.sat ?

0-200 Available when the input source is

locked.

HSG/Yellow/Saturation Hsg.y.sat ?

0-200 Available when the input source is

locked.

HSG/Red/Hue hsg.r.hue ?

0-200 Available when the input source is

locked.

HSG/Green/Hue hsg.g.hue ?

0-200 Available when the input source is

locked.

HSG/Blue/Hue Hsg.b. hue ?

0-200 Available when the input source is

locked.

HSG/Cyan/Hue hsg.c. hue ?

0-200 Available when the input source is

locked.

DU9800Z DLP Pro

ecto

Remote Communication Manual

OSD Function Operation

command

Settings/Return Values Note

HSG/Magenta/Hue hsg.m. hue ?

0-200 Available when the input source is

locked.

HSG/Yellow/Hue Hsg.y. hue ?

0-200 Available when the input source is

locked.

HSG/White/Red Gain hsg.wr.gain ?

0-200 Available when the input source is

locked.

HSG/White/Green Gain hsg.wg.gain ?

0-200 Available when the input source is

locked.

HSG/White/Blue Gain Hsg.wb.gain ?

0-200 Available when the input source is

locked.

HSG Reset hsg.reset (execute) Available when the input source is

locked.

Noise Reduction nr ?

0-3 (Noise Reduction) Available when the input source is

locked.

Dynamic Black dblack ?

0 = Off

1 = On

Not applicable when the projector is

at below condition:

- Standby mode.

- Edge Blend is On

- 3D mode

- Dynamic Black is off

Light Off Timer Light.off.timer ?

0 = Disable

1 = 0.5 Seconds

2 = 1.0. Seconds

3 = 1.5 Seconds

4 = 2.0. Seconds

5 = 3.0. Seconds

6 = 4.0. Seconds

Not applicable when the projector is

at below condition:

- Standby mode.

- Edge Blend is On

- 3D mode

- Dynamic Black is off

Freeze freeze ?

0 = Off

1 = On

Not applicable when the projector is

at standby mode

DU9800Z DLP Pro

ecto

Remote Communication Manual

Alignment

OSD Function Operation

command Settings/Return Value Note

Lens control

Zoom

zoom.in (execute) Not applicable when the projector is

at standby mode

Lens control

Zoom

zoom.in.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Zoom In

zoom.in.3 (execute) Not applicable when the projector is

at standby mode.

Lens control

Zoom Out

zoom.out (execute) Not applicable when the projector is

at standby mode.

Lens control

Zoom Out

zoom.out.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Zoom Out

zoom.out.3 (execute) Not applicable when the projector is

at standby mode.

Lens control

Focus near

focus.near (execute) Not applicable when the projector is

at standby mode

Lens control

Focus near

focus.near.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Focus near

focus.near.3 (execute) Not applicable when the projector is

at standby mode.

Lens control

Focus far

focus.far (execute) Not applicable when the projector is

at standby mode.

Lens control

Focus far

focus.far.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Focus far

focus.far.3 (execute) Not applicable when the projector is

at standby mode

Lens control

Lens up

lens.up (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens up

lens.up.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens up

lens.up.3 (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens down

lens.down (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens down

lens.down.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens down

lens.down.3 (execute) Not applicable when the projector is

in standby mode.

Lens control

Len left

lens.left (execute) Not applicable when the projector is

at standby mode

Lens control

Len left

lens.left.2 (execute) Not applicable when the projector is

at standby mode.

Lens control

Len left

lens.left.3 (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens right

lens.right (execute) Not applicable when the projector is

at standby mode.

Lens control

Lens right

lens.right.2 (execute) Not applicable when the projector is

at standby mode.

DU9800Z DLP Pro

ecto

Remote Communication Manual

OSD Function Operation

command Settings/Return Value Note

Lens control

Lens right

lens.right.3 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Load Memory

lens.load ?

1-10 set of lens memory

(Load)

Not applicable when the projector is

at standby mode

Lens Memory /

Save Memory

lens.save ?

1-10 set of lens memory

(Save)

Not applicable when the projector is

at standby mode.

Lens Memory /

Clear Memory

lens.clear ?

1-10 set of lens memory

(Save)

Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memor

Lens.mem.1 (execute) Not applicable when the projector is

at s

andb

mode.

Lens Memory /

Lens Memory

Lens.mem.2 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.3 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.4 (execute) Not applicable when the projector is

at standby mode

Lens Memory /

Lens Memory

Lens.mem.5 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.6 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.7 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.8 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.9 (execute) Not applicable when the projector is

at standby mode.

Lens Memory /

Lens Memory

Lens.mem.10 (execute) Not applicable when the projector is

at standby mode.

Center Lens lens.center (execute) Not applicable when the projector is

at standby mode or Lens Lock is

Lens Lock Lens.lock ?

0 = Off

1 = On

Not applicable when the projector is

at standby mode.

Digital Zoom /

Digital Zoom

digi.zoom =

0 - 100 Not applicable when the projector is

at standby mode.

Digital Zoom /

Digital Pan

digi.pan =

-320 - 320

(depend on input timing;

use "op digi.pan ?" to

query current setting)

Not applicable when the projector is

at standby mode.

Digital Zoom /

Digital Scan

digi.scan =

-200 - 200

(depend on input timing;

use "op digi.scan.?" to

query current setting

Not applicable when the projector is

at standby mode.

Digital Zoom /

Reset

digi.zoom.rst

(execute) Not applicable when the projector is

at standby mode.

Active Warp

(Not on OSD)

active.warp =

1 = Keystone

2 = Four Conner

3 = Rotation

4 = Pin/Barrel

5 = Arc

Not available when projector is at

standby mode.

Reset Warp setting

(Not on OSD)

Warp.reset (execute) Not available when projector is at

standby mode.

Andere Handbücher für DU9800Z

Inhaltsverzeichnis

Andere Vivitek Projektor Handbücher

Vivitek

Vivitek DU9057Z Bedienungsanleitung

Vivitek

Vivitek Qumi Z1V Bedienungsanleitung

Vivitek

Vivitek DU8395Z Bedienungsanleitung

Vivitek

Vivitek DX273 Series Bedienungsanleitung

Vivitek

Vivitek DX977 Series Bedienungsanleitung

Vivitek

Vivitek D4500V Bedienungsanleitung

Vivitek

Vivitek QUMI Q9 Bedienungsanleitung

Vivitek

Vivitek H1186 Series Bedienungsanleitung

Vivitek

Vivitek DX6731 Bedienungsanleitung

Vivitek

Vivitek DW2650Z Bedienungsanleitung

Vivitek

Vivitek Qumi Q7 Handbuch

Vivitek

Vivitek DU6771-WH Bedienungsanleitung

Vivitek

Vivitek DX813 Series Bedienungsanleitung

Vivitek

Vivitek D755WT SERIES Bedienungsanleitung

Vivitek

Vivitek D835 Bedienungsanleitung

Vivitek

Vivitek D326 Bedienungsanleitung

Vivitek

Vivitek HK2299 Bedienungsanleitung

Vivitek

Vivitek DU4381Z-ST Bedienungsanleitung

Vivitek

Vivitek DX883ST Series Bedienungsanleitung

Vivitek

Vivitek D75XXWT/ D75XXWTi Series Bedienungsanleitung

Vivitek

Vivitek D8 PointRacer Series Bedienungsanleitung

Vivitek

Vivitek DX881ST Bedienungsanleitung

Vivitek

Vivitek DU4871Z- WH Bedienungsanleitung

Vivitek

Vivitek DH75 Series Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung