Vixen Horns VXH1002C Bedienungsanleitung

VXH1002C

INSTALLATION GUIDE

PAGE 1 of 3

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for

this product.

CONTENTS

“Ooga”Air Horn (Chrome Color)

12V Heavy Duty Air Compressor

Wire with Connectors

Mounting Hardware

SAFETY INSTRUCTIONS

Make sure you never attempt to disassemble this horn kit’s electrical components.

Never use your bare hands to any part of the compressor immediately after or during use.

Avoid operating this product in an area with risk of falling or submergence into a liquid (water).

Do not reach out for or touch any component that has fallen or been submerged into water.

Make sure you set up in areas with good ventilation.

Never sound the air horn anywhere near your ear(s) or that of another person.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drilling operations.

The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power

source of 12 volts.

MOUNTING

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of

the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive

shaking. Do not attach the horn to any plastic or other flexible material.

Indicate the positions before drilling the hole of 1/4-inches in diameter. With the provided hardware for

mounting, firmly tighten them to the vehicle.

Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the

provided mounting hardware.

IMPORTANT: Installation in a high location underneath the hood and the downward orientation of the trumpet will

prevent the horn from collecting any water.

VXH1002C

INSTALLATION GUIDE

PAGE 2 of 3

ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH)

For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn

doesn’t sound even if the compressor motor turns on, simply reverse the wires.

For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+)

terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.

ELECTRICAL CONNECTIONS (NEW HORN BUTTON)

Using a 15A fuse (not provided) for circuit protection, connect the positive terminal of the compressor to the

power source.

The negative terminal of the compressor is attached to the horn button (not provided). The other horn button

terminal is attached to any rust and paint free metal to ground.

IMPORTANT: Both connection must be done with 18-gauge wire or heavier.

Inhaltsverzeichnis

Andere Vixen Horns Horn Handbücher

Vixen Horns

Vixen Horns VXO8715 Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3418B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3318 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330DP Bedienungsanleitung

Vixen Horns

Vixen Horns VXS-8200 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8560 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXS6100 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330O/3114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH1168BX2 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXS7910 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8115/3311 Bedienungsanleitung

Vixen Horns

Vixen Horns VXH1004 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8815/3311C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8805/4124C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330O/4318C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8580/4318C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715/3118 Bedienungsanleitung

Vixen Horns

Vixen Horns VXS-1488AR Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8530/3318 Bedienungsanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch

Valcom

Valcom V-1069 Bedienungsanleitung