Vixen Horns VXH1101 Bedienungsanleitung

VXH1101

INSTALLATION GUIDE

PAGE 1 of 2

BEFORE BEGINNING YOUR INSTALLATION

Read through the whole instruction guide before getting started with the installation. Professional installation is

recommended for this product.

CONTENTS

Snail Air Horn

12V24V Solenoid with Compression Fitting

1/4” OD Air Line

Mounting Hardware

SAFETY INSTRUCTIONS

Avoid dismantling this horn’s electrical elements.

Avoid touching compressor components with your bare hands immediately after or during use.

Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.

Avoid reaching out to touch or pick up any fallen or water submerged parts.

Set the horn up for use only in areas with adequate ventilation.

Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drill operations.

Ensure that your air system has no pressure before starting the installation.

The specific voltage requirement for this horn is 12 or 24 volt DC, therefore installation must be done to a DC

power source of 12 or 24 volts.

MOUNTING

Identify a suitable area for mounting, preferably protected from road debris and spray from the tires. Do not

attach the horn to any plastic or other flexible material.

Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a

drill.

Use the provided mounting hardware to fasten the horn.

VXH1101

INSTALLATION GUIDE

PAGE 2 of 2

AIR LINE INSTALLATION

On one side of the included ¼” OD air

line, attach the compression nut and

force the air line upon the male inlet

fitting which is found on the electric

solenoid valve.

Pass the brass nut through the inlet

fitting and fasten.

Take the air line’s other side and place

the compression nut of the air tank

fitting on it. Force the air line onto the

male fitting of the tank and then fasten

the compression nut. WARNING:

Avoid tying the brass nut too tight.

ELECTRICAL CONNECTIONS

Wire one of the solenoid valve’s leads to the positive (+) terminal of the battery or alternator. WARNING: We

highly recommend that you use a 10A fuse (not provided) to assure that the circuit remains safe and will not

be damaged by excess current.

Wire the other lead of the solenoid valve to one of the terminals on the horn button.

Ground the other terminal on the horn button by wiring it to bare metal.

Inhaltsverzeichnis

Andere Vixen Horns Horn Handbücher

Vixen Horns

Vixen Horns VXS-1050AR Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8805/4114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350/3418B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8115/3311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8334BI Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/4124C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4830AB/1168B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330B/1168B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8530/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8580/3418B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/4124C Bedienungsanleitung

Vixen Horns

Vixen Horns VXH1264 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350B/3114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH1164 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/3311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH1164BX2 Bedienungsanleitung

Vixen Horns

Vixen Horns VXH2190SS Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/4114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXM2390N Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8325/3118 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350/1264Y2 Bedienungsanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch

Valcom

Valcom V-1069 Bedienungsanleitung