Vixen Horns VXH1174CX2 Bedienungsanleitung

VXH1174CX2

INSTALLATION GUIDE

PAGE 1 of 2

BEFORE BEGINNING YOUR INSTALLATION

Read through the whole instruction guide before getting started with the installation. Professional installation is

recommended for this product.

CONTENTS

Single Trumpet Horn (Chrome Plated) with Weather Cover x 2

12V Solenoid with Compression Fitting x 2

3/8” OD Air Line x 2

Mounting Hardware

SAFETY INSTRUCTIONS

Avoid dismantling this horn’s electrical elements.

Avoid touching compressor components with your bare hands immediately after or during use.

Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.

Avoid reaching out to touch or pick up any fallen or water submerged parts.

Set the horn up for use only in areas with adequate ventilation.

Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drill operations.

Ensure that your air system has no pressure before starting the installation.

The specific voltage requirement for this horn is 12 volt DC, therefore installation must be done to a DC power

source of 12 volts.

MOUNTING

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of

the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive

shaking. Do not attach the horn to any plastic or other flexible material.

Using the back bracket as a guide estimate and mark the positions for the holes, then perforate to size using

a drill.

Move the support bracket towards the trumpet's opening until is tight, then mark the hole and drill.

Use the provided mounting hardware to fasten the horn.

VXH1174CX2

INSTALLATION GUIDE

PAGE 2 of 2

WEATHER COVER

Your horns comes with weather covers, we suggest that you use them at all times as it protect internal parts

of the trumpet.

AIR LINE INSTALLATION

On one side of the included 3/8” OD air line, attach the compression nut and force the air line upon the male

inlet fitting which is found on the electric solenoid valve.

Pass the brass nut through the inlet fitting and fasten.

Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto

the male fitting of the tank and then fasten the compression nut. WARNING: Avoid tying the brass nut too

tight.

Repeat the steps above to connect the second solenoid to the air supply.

ELECTRICAL CONNECTIONS

Join one wire from one solenoid with one wire from the second solenoid, this will be the positive lead and

must be connected to the positive (+) terminal of the battery or alternator. WARNING: We highly recommend

that you use a 20A fuse (not provided) to assure that the circuit remains safe and will not be damaged by

excess current.

Join the remaining wire of one of the solenoids with the remaining wire of the second solenoid, this will be

your negative lead and must be connected to one of the terminals on the horn button.

Ground the other terminal on the horn button by wiring it to bare metal.

Inhaltsverzeichnis

Andere Vixen Horns Horn Handbücher

Vixen Horns

Vixen Horns VXO8315/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8530/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3318XB Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350B/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXS7910 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/3418 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350B/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350/4318 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4830AB/3318XB Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/4124C Bedienungsanleitung

Vixen Horns

Vixen Horns VXH6803C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8530/4124B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/1164 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8210/3311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8805/3114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/1170C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/1164Y Bedienungsanleitung

Vixen Horns

Vixen Horns VXPRO8524B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH2311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715 Bedienungsanleitung

Vixen Horns

Vixen Horns VXH6801C Bedienungsanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch

Valcom

Valcom V-1069 Bedienungsanleitung